-
If the two hard drive partitions are not the same and the size is not the same.
Then don't think about hard disk engraving.
But with ghost you can ghost each partition
First you have to put it on a new hard drive partition.
Reserve the partitions (number and size) on your original hard drive
Then copy each ghost file to a new hard drive.
If you have a new hard drive, it's not very big.
Then copy one by one
and restore each partition.
Let's talk about the method of hard disk sharing file copying.
The hard disk interface is incorrect.
Although I don't quite understand what you mean.
But I feel that it is possible to connect two fast hard disks to one host at the same time.
This can be done under the operating system.
Copy and paste your data.
The advantage of this is that the entire replication process can be controlled.
Modify or skip it.
But the downside is that the time will be fuller than the ghost method.
Overall, I personally recommend dual hard disk links to the same host.
Carry out file exchange mode.
Safety first.
-
You said the interface is different, how did you get it?
If A's hard disk can be connected to B, you can access A's hard disk on B when you connect it and turn it on, so you can do whatever you want.
-
Yes, but both disks should have the same capacity. Or in a local area network, use QQ to transmit, very fast,
-
It seems that your B computer does not have an ATA hard disk interface, so the hard disk of A computer will not be able to be used on B computer. You can borrow a friend's portable hard drive, and then copy all the data on computer A to the portable hard drive (the current mobile hard disk has 200g, which is enough to copy all your things), and then copy the contents of the mobile hard drive to computer B, which is the best solution.
Is it worth referring to?
-
Yes, you can go into the ghost and select the hard disk to gram, which is disk to disk
-
Absolutely.
Just clone it will do.
-
It's best to find a professional to copy it for you.
-
Ghost is an affordable software backup and recovery option that is used by many individual users, as well as by many schools and companies. From the perspective of usage, the following problems are mainly encountered:
1. For the computer rooms of schools and training institutions, the network copy and incremental copy functions of the hardware restore card cannot be realized;
2. The recovery reliability is strong, but the recovery efficiency is low, and the hardware restore card is restored in time;
In view of the above situations, I would like to give you a little advice:
1. The school still chooses the hardware restoration card as much as possible, and the network function can greatly reduce the maintenance workload of a large number of machines;
2. For occasions with high requirements for immediacy of recovery, such as Internet cafes, it is best to install restoration products to achieve restoration protection immediately; And ghost as a hard backup method, in case of emergency, as a second choice.
-
2.This can also happen when there is a problem with the memory. You can change the memory and try again, or you can connect the hard drive to another computer, and then change back to the original machine after the ghost system is completed.
3.The hard drive has bad sectors. If there are other important data in the hard disk, please copy it on another computer first, and then repair the hard disk.
4.There is a problem with the hard disk partition table. You can use the partition table repair software in the ghost system disc to fix it.
5.Before you are ready to recover, it is best to copy all the files in the ghost system disc to the computer and then restore the folder with the English name. In this way, you can prevent you from using the disc to restore the system unsuccessfully and can not enter the system, you can use the files in the hard disk to try again, by the way, you can check the disc when copying, and the data can be read normally.
Or you directly use the ghost system installation file in the directory to restore on the system before the cluster, and the file will be copied to the d drive when recovering, please make sure that the d disk has enough empty sources).
6.If you have used the ghost system disc to recover, but the recovery fails during the recovery process, and there is no backup file of the ghost system in the hard disk, then you can only connect the hard disk to another computer to copy the ghost system file and then recover.
7.When the memory is unstable and there is a problem, not only the ghost recovery method will not be successful, but also the complete step-by-step installation method will also be unsuccessful.
8.Sometimes the system does not boot correctly after repartitioning and the recovery ghost system is completed, then you have to use PQ to check whether the C drive is set to function.
-
1: The things of the C drive are restored to the way you used to restore the backup with one click, and the other disks remain unchanged.
2: The icon of the desktop is also restored to the appearance of one-click restore backup3: No, the program installed in the C disk will be emptied, and the program installed on the disk can be used, but the shortcut icon is not on the desktop, but in the folder you selected when you installed the program.
4: No conflict, this is not like antivirus software, anti-soft conflict is also in the simultaneous operation of a file monitoring will be conflicted, one-click restore (one-click recovery) can not be started at the same time, so there is no conflict. The one-click recovery function that comes with the system is useful after using ghost one-click recovery, because it was just bought and you installed it later, so if you use the system's built-in one-click recovery function to restore the system, then ghost will be useless; It is recommended that you choose to use only one of them.
5: No matter which recovery is used, it must be re-patched.
-
1.No, it's a mirror image of the backup file used to restore the ghost.
2 Nope. Yes, because the icon of the desktop also exists in the C drive, after the restoration, it is the previous desktop icon 3Not necessarily, as long as there is no C drive, most of the software can be used, but the boot boot needs to be reset again.
4.Conflict,There is a principle to restore with ghost.,It's equivalent to changing your C disk things.,5.Of course, it's all in the C drive, as long as it's the C drive, everything has an impact!
Landlord,Actually, the principle of ghost is like this:After you install ghost, he will remind you to make a backup,In fact, this backup is your C disk,This backup file has everything in the C disk when you back up,When you restore with ghost,It is to replace the things of the C disk when you restore and the things of the C disk when you restore,Including the registry,Patches,Settings and so on
-
1.It's gone.,Ghost is to replace your existing file with another file.,Everything in the entire C drive is gone.。 So back up in advance.
2.Because they have all been replaced, of course they are not the original icons.
3.Generally, the ghost version of the system will be installed by default QQ Thunderbolt and other software,So you can use it after installation。
4.The one-click recovery you use is to restore the system state when the computer leaves the factory, generally the backup file of this system is in the hidden partition, and if you don't destroy the hidden partition with ghost, it's no problem, otherwise it may be affected.
5.It still has to be re-patched.,Because the ghost disk on the Internet is generally done some time ago.,And the patch is updated from time to time.。 So it's still going to be patched.
It's easy to make a ghost system.,It'll be a few more times.,Everyone is from raw to cooked.,Remember to prepare a copy.,So as not to lose data.,Don't panic if something goes wrong.,Find a solution on the Internet at any time.,It's solved.。 Good luck.
-
1.No.
2.Yes 3OK.
4.Conflict 5Use.
-
1.If the system is on the C drive, the C drive will be completely overwritten after the restoration.
2.After the restoration of the desktop icon, it is the previous pack.
3.If QQ, Thunderbolt and other software are available before packaging, they can be used normally after recovery.
4.After installing all the software, there is a ghost package, and you can use ghost to restore it later.
5.System patches will be updated at any time, and it is recommended to update the patches after a certain period of time.
-
1. After restoration, everything in the C disk is restored to the time when the system was just made2. After the recovery, the desktop icon is restored to the way it was when you just made the system and you backed it up3. If you have QQ when you back up, you can use it directly, as long as it is a tool you have when you back up.
4 Both are the same function, do not conflict, use one of them on the line, 5 the same, over time, unavoidable when patching.
-
What your desktop looked like when you backed it up before, the restore will look like it.
-
2.The hard disk has bad sectors: the ghost cannot be written because of the bad sectors;
3.This can also happen when there is a problem with the memory.
4.There is a problem with the hard disk partition table. You can use the partition table repair software in the ghost system disc to fix it.
5.The hard disk does not have a drive letter, and the recovery failure is caused by the loss of the partition table due to viruses or other accidents;
6.Overclocking, recovery failures due to unstable overclocking.
This situation may be due to the fact that some IE programs conflict with the plug-ins in the web page, or that there are Trojan horses or other suspicious programs on the web page you are browsing. >>>More
IE cache will take up space though.
But it won't be that big. >>>More
The system is broken, so let's reinstall the system
First, enter the pure DOS state ......You first have to install the virtual floppy drive or dwarf DOS toolbox in your system, or you can take a Windows 98 installation CD, choose to boot from the CD, and you can enter the pure DOS. (You're now .......)) >>>More
I've had a similar issue as well, hehe, it's solved!!
This should be a compressed file, and the inside is the tool that the computer company uses to back up) to extract it, and then double-click to run. >>>More