-
The standard height from the hoop to the ground is 305cm, the lower edge of the backboard is 290cm from the ground, and the distance between the bottom edge of the rebound and the bottom line is 120cm. The size of the backboard is 180 cm wide, 105 cm vertical height, and its lower edge is at least 290 cm from the floor. The hoop is made of solid iron with an inner rim diameter of a minimum of 45 cm and a maximum of orange paint.
The minimum diameter of the metal hoop is and the maximum is . The net shall be white, suspended from the hoop for the purpose of providing a slight resistance to the ball after it has been put into the hoop, and shall have 12 mesh mesh to be suspended from the hoop, with a minimum length of 40 cm and a maximum length of 45 cm.
The surface of the rebound should be flat, and a rectangle of 59 cm wide and 45 cm high should be drawn on all sides from the outer line, and the upper edge of the bottom line of this rectangle must be connected with the upper end of the hoop. Both sides of the backboard should be made of transparent material, preferably reinforced safety glass, whose hardness is equivalent to three centimeters of wood, of course, basketball hoops in many places are not necessarily made of reinforced safety glass, but replaced by other materials of comparable hardness such as wood boards and acrylic.
Basketball hoop requirements for playing venues.
The basket used in large-scale basketball games is an anti-pressure basket, with a spring-like structure of the constant pressure device, when the constant pressure device is opened, the basket will rotate downward with the player's dunk force, so as to avoid the player's fingers colliding with the basket and injury, when the player releases the basket, the constant pressure device will lose the load and bounce back to the original position.
The backboard is five fulcrums, equipped with international high-strength safety glass rebounds (13mm thick explosion-proof film), specifications: 1800x1050 (mm), with high transparency, good weather resistance, anti-aging, corrosion resistance, not easy to blur and other characteristics, and the backboard is covered with protective rubber strips along the side, which can effectively protect the athlete from injury when dunking, and the basketball board glass has reached the 3C certification standard, and the high-grade polyurethane edge strip. Link box with basket, aluminum edging.
-
The basketball classroom opens today! Do you know how tall the hoop really is? 」
-
The size of the basketball hoop is meters, and the height of the basketball hoop is meters. 1. The height of the basketball hoop: the standard height from the hoop to the ground is meters.
2. Rebound: size: m.
3. The main rod of the basketball stand: the diameter of the high-quality square steel pipe is 140mm.
4. The mobile bottom box of the basketball stand: made of high-quality steel plate, the size is: 20 100 180, and the mobile bottom box is loaded with weights to ensure the stability in use.
Specifications of other equipment in the stadiumThe timer should be installed in a place where everyone in the field can clearly see the time of the game, the number of points and the number of fouls committed by the team. The 30-second timer should be automatic, with a digital countdown timer and displayed in seconds. The record sheet of all official competitions organized by the International Basketball Association shall be approved by the International Basketball Federation.
The foul count card should be on a white background, with a minimum size of 20 cm in length and 10 cm in width.
The hydraulic basketball hoop is the basketball hoop base, which has a set of hydraulic lifting system, which can complete the standard height of the basketball hoop set up to rise or fall, the ruler is lacking, and the needs of walking. Among them, there are manual and electro-hydraulic basketball hoops. Base size meters, arm span.
-
The dimensions and heights of the basketball hoop are as follows:
1.The dimensions of a standard basketball hoop are length: 280cm, width: 150cm
2.The height of the lower edge of the basket slag board from the ground is **m**3The basketball hoop rebound is equal to the distance between the two perpendicular sides of the hoop.
4.The racket height of the middle school basketball hoop is **m** The basketball hoop for teenagers is the same as the basket hoop for middle school students.
5.The height of the elementary school basketball hoop is **m** or **m**, I hope the above information is helpful to you.
-
The pillars of the basketball hoop are at least 1m away from the outer edge of the end line. The backboard should be wide horizontally and vertically high, and the bottom edge of the original size of the rebound from the ground can still be used). The bottom, edges, and pillars of the rebound should be properly bandaged. The upper edge of the hoop is from the ground, and the diameter of the blue hoop is .
In addition, the size of the standard basketball court is 28 m and 15 m in shape, and the measurement of the court is measured from the inner edge of the boundary. The measurement of each area, line and circle in the field is measured from the outer edge of the boundary, and the line width of each line on the field is 5cm.
-
The height of a standard basketball hoop is meters, and that for middle school students, it is meters.
According to FIBA regulations, the standard height of basketball hoops is meters; Middle school students are meters; Elementary school students are meters or meters, basketball hoop rebounds its specifications are long meters, basketball hoop width (vertical height) meters, basketball hoop thickness meters basketball hoop lower edge from the ground meters. Basketball hoops for teenagers are the same as basketball hoops for middle school students.
The basketball hoop is one meter from the ground, and the distance between the two vertical sides of the basketball hoop and the rebound is equal. The closest point between the backboard of the basketball hoop and the inner edge of the hoop is 15 cm, and the height of the basketball hoop is meters.
The most basic work of the maintenance of the basketball hoop is to check it regularly, check the degree of rust and firmness of the connection and welding parts twice a year, check whether the frame has paint off, whether there is rust, and check whether there are holes. Once the paint peels off, it should be repaired in time, otherwise it will cause the steel of the basketball hoop to rust, corrode seriously, and eventually perforate.
The parts that appear rusty and perforated should be repaired and anti-corrosion, among which the welded part is the most prone to decay, if there is looseness or decay, it should be maintained and repaired with the manufacturer in time.
-
The bottom edge of the rebound is meters from the ground, and the basket is meters from the ground.
What is the size of the basketball court and basketball hoop:
1. The size of the field: First of all, a standard basketball court is 28 meters long and 15 meters wide according to the international standard field size, plus the place where the basketball hoop is placed, the length of the field needs to be about 34 meters, and the specific size can be adjusted appropriately to keep the size of the field proportional.
2. The lower edge of the rebound is meters from the ground, and the basket is meters from the ground.
3. The placement of the ball frame: the base part of the ball frame is generally 2 meters by 1 meter, the length of the probe arm is between meters and meters, and the probe arm needs to be extended into the ground according to the requirements, and the general field edge line is 5 cm, if the probe arm is calculated by meters, the ball frame should be placed at 55 cm outside the field line.
4. Safety: The ball frame is prone to two parts, one is the base support foot, the general material is cast iron, but it is easy to corrode, the good ones are the cast steel used, and the durability and safety are greatly improved.
5. The second is the basket, the bad basket will lose its elasticity after a long time, and it will fall off because of the thin and loose material for a long time.
If it is an embedded part, first deal with the embedded parts, according to the requirements of basketball rules, the vertical projection in front of the rebound is 120 cm away from the inner edge of the bottom line, and then determine the position of the embedded parts according to the number of forward extensions of the basketball stand; >>>More
Basketball Court Specifications The specifications of the basketball court are set according to the rules of the basketball game. The standard basketball court is a rectangular flat field with a length of 28 meters and a width of 15 meters. There must be clear boundaries on the pitch. >>>More
According to public information, basketball hoops are divided into single-arm mounted basketball stands, mobile multi-position basketball stands, single-arm fixed basketball stands, single-arm swallow basketball stands, and concave box basketball racks (with a cement counterweight of 300 kg and a total weight of 500 kg for a single basketball stand). Among them, the weight of the mobile multi-position basketball stand is 300kg, the weight of the single-arm mounted basketball stand is 800kg, the weight of the single-arm fixed basketball stand is 300kg, the weight of the single-arm swallow basketball stand is 420kg, and the recessed box basketball stand (with a cement counterweight of 300 kg, and the total weight of a single basketball stand is 500 kg. >>>More
1. Prepare drawing tools, paper, pen, eraser, and ruler.
2. You can draw the steel pipe of the basketball hoop with the help of a ruler, because it is straight. Let's start by drawing a rough outline of the basketball hoop on paper. >>>More
Basketball hoop use and maintenance methods:
Before the basketball hoop is installed, the field should be put out, and it is best to draw the line of the basketball court before installation. >>>More