What are the precautions for belt peeling machine?

There are three precautions for belt stripping machine:

1) When the power is turned on, it should be operated by a professional electrician.

2) The stripping machine should be fixed when used, and the belt peeling machine of Shandong China Coal Group should prevent sliding.

3) The width of the peeling should not exceed the relevant requirements. ymhy1

The belt stripper is used to tighten and clean the adhesive layer of the spalling conveyor head during the preparation of the belt joint, and this operation can be used in various occasions and locations. Scope of application: 651-2200mm ordinary conveyor belts of various widths.

Belt stripping machine features:

1. The stripping area is large and the speed is fast, which can greatly reduce the labor intensity and reduce the time required for the joint;

2. Light weight, easy to carry and handle;

3. Stable operation.

Belt stripping machine structure.

1, host 2, clamp 3, control box.

4. Power cord 5, fixing hole 6, handle 7, wire rope.

How to use the belt peeling machine.

1. According to the conventional method, the conveyor belt should be centered, and the corresponding joint should be cut with a knife and separated by a layer;

2. Put the conveyor belt stripping machine in the appropriate position and fix it with a wire rope;

3. Turn on the power supply;

4. Clamp the separated layer with a clamp, start the motor, and use a knife to cut the peeled part in an appropriate place;

5. After the first layer is peeled, repeat the above relevant steps to peel off the second layer and the third layer respectively.

Precautions for belt peeling machine.

1. The power supply should be operated by an electrician.

2. The peeling machine should be fixed when used to prevent sliding.

3) The width of the peeling should not exceed the relevant requirements.

Belt stripping machine product details: BPJ-3 belt stripping machine is used in mining, electrochemical plants, petrochemical, wharves and other places to fasten and clean the adhesive layer of the spalling conveyor head when the belt joint is prepared, it is suitable for 650-2200mm various widths of ordinary conveyor belts. It has a light weight, easy to carry and carry; Stable operation and other characteristics.

BPJ-3 belt stripping machine is used for the separation of nylon, canvas and other transportation tape cover glue and canvas layer, with strong traction, large tearing surface, fast speed and other characteristics, can greatly reduce the labor intensity of the operator.

Advantages of BPJ-3 belt stripping machine.

The 1 bpj-3 belt stripping machine has a large stripping area and fast speed, and can be lifted to swim around to greatly reduce labor intensity and reduce the time required for joints;

2 bpj-3 leather positive pin with stripper is light in weight, easy to carry and handle;

Technical parameters of belt stripping machine:

1.Scope of application: canvas, nylon belt, belt conveyor belt.

2.One-time stripping range: 150mm

3.Rotation speed of steel rope reel: min

4.Wire rope diameter: 6mm

5.Steel rope traction: single rope 3500n double rope:

7000n6.Steel rope traction speed: single rope m s double rope:

m/s7.Motor Model: Y801-4 Voltage:

380v8.Power:

9.Dimensions: 80 420 400mm

10.Total weight: 35kg

How to use the belt peeling machine and precautions for use.

How to use the belt stripping machine: according to the conventional method, the belt stripping machine conveyor belt is set to the center line, and the corresponding joint should be cut with a knife and the first layer of the brigade should be separated; Put the belt stripping machine in the appropriate position of SHB6 and fix it with a wire rope; Turn on the power supply of the belt stripping machine; Clamp the first layer of separation with a clamp, start the motor, and use a knife to cut the peeled part in the appropriate place; After the first layer is peeled off, repeat the above steps to peel off the second layer, the third layer, etc. respectively.

Please click Enter a description.

Precautions for the use of belt peeling machine.

1. Turn on the power supply of the belt stripping machine to be operated by an electrician.

2. The belt stripping machine should be fixed when used to prevent the coal from sliding.

3. The width of the peel should not exceed the relevant requirements.

Please click Enter a description.

Precautions. Please read the details of the experience carefully.

The power supply should be operated by an electrician.

Belt peeling machine is a kind of machinery used for belt peeling, it is mainly used to fasten and clean the glue layer of the head of the spalling conveyor head when the belt joint is prepared, and it also has the characteristics of light weight, small size and easy to carry, so this machine can be used in any place.

The disadvantages of the belt stripping machine appear, effectively reduce the labor intensity, reduce the time required for the joint at the same time, improve the work efficiency, the belt stripping machine can be used in mining, electrochemical plants and petrochemical, wharves and other places to fasten and clean the adhesive layer of the belt joint when preparing the belt joint, and the coal acts on the separation of the nylon and canvas and other transportation tape cover glue and the canvas layer, which has the characteristics of strong traction, large tearing surface and fast speed, which can greatly reduce the labor intensity of the operator.

At the same time, the operation method of the belt stripping machine is also relatively simple, only need to set the center line of the conveyor belt according to the conventional method, and the corresponding joint should be cut with a knife, and the first layer should be separated, SH20 then fixes the machine, clamps the first layer of separation with a clamp, starts the motor, and cuts it in the appropriate place, and then only needs to repeat the above steps to peel off the following layers.

Precautions. Plugging in the power should be operated by a professional electrician.

When using, the peeler should be fixed to prevent sliding.

When peeling, the width should not exceed the relevant socks.

1. According to the conventional method, the conveyor belt should be centered, and the corresponding joint should be cut with a knife and the first layer should be separated;

2. Put the conveyor belt stripping machine in the appropriate position and fix it with a wire rope;

3. Turn on the power supply;

4. Clamp the first layer of separation with a fixture, start the motor, and use a knife to cut the peeled part in an appropriate place;

5. After the first layer is peeled off, repeat the above relevant steps to peel off the second layer and the third layer respectively.

1) When the power is turned on, it should be operated by a professional electrician.

2. The peeling machine should be fixed when used to prevent sliding.

3) The width of the peeling should not exceed the relevant requirements.

Precautions for belt peeling machine.

1) When the power is turned on, it should be operated by a professional electrician.

2. The peeling machine should be fixed when used to prevent sliding.

3) The width of the peeling should not exceed the relevant requirements.

Scope of application of peeling machine: It is suitable for peeling and processing plum liquid for freshly cut coniferous wood and some hardwood wood, and it can also complete the peeling treatment of some frozen wood and dried materials.

Summary. <>

Hello dear, I'm glad to answer for you: <>

1.Make sure the work area is safe and avoid other people entering or approaching. 2.

Turn off the power and disconnect the power cord to make sure the machine is stopped. 3.Use appropriate tools, such as wrenches, pliers, etc., to disassemble the relevant parts of the belt stripping table.

4.Pay attention to protect the surface of the machine and other parts to avoid scratches or damage5When disassembling the belt, be careful to avoid belt breakage or sudden relaxation to avoid injury6

During the disassembly process, pay attention to keep the inside of the machine clean and avoid dust and debris from entering the inside of the machineAfter disassembly, carefully check that all parts are intact and carry out necessary cleaning and maintenanceWhen reinstalling the belt, follow the correct order and method to ensure that the belt is properly installed and tightened

Before restarting the machine, carry out the necessary inspections and tests to ensure that the machine is functioning properly and meets the safety requirements.

Precautions for belt stripping table.

Hello dear, I'm glad to answer for you: Sakura's <>

1.Make sure the work area is safe and avoid other people entering or approaching. 2.

Turn off the power and disconnect the power cord to make sure the machine is stopped. 3.Use appropriate tools, such as wrenches, pliers, etc., to disassemble the relevant potato roll parts of the belt stripping table.

4.Pay attention to protect the surface of the machine and other parts to avoid scratches or damage5When disassembling the belt, pay attention to avoid breaking the belt or suddenly loosening the spine to avoid injury6

During the disassembly process, pay attention to keep the inside of the machine clean and avoid dust and debris from entering the inside of the machineAfter disassembly, carefully check that all parts are intact and carry out necessary cleaning and maintenanceWhen reinstalling the belt, follow the correct order and method to ensure that the belt is properly installed and tightened

Before restarting the machine, carry out the necessary inspections and tests to ensure that the machine is functioning properly and meets the safety requirements.

Hello dear, I'm glad to answer for you: <>

Osakura's saffron] dear, hello, I'm glad to answer for you: <>

1.Make sure the work area is safe and avoid other people entering or approaching. 2.

Turn off the power and disconnect the power cord to make sure the machine is stopped. 3.Use appropriate tools, such as wrenches, pliers, etc., to disassemble the relevant parts of the belt stripping table.

4.Pay attention to protect the surface and other parts of the machine to avoid scratches or damageWhen disassembling the belt, be careful to avoid belt breakage or sudden relaxation to avoid injury6

During the disassembly process, pay attention to keep the inside of the machine clean and avoid dust and debris from entering the inside of the machineAfter the disassembly is completed, carefully check whether all parts are intact, and carry out necessary cleaning and maintenanceWhen reinstalling the belt, follow the correct order and method to ensure that the belt is properly installed and tightened

Before restarting the machine, carry out the necessary inspections and tests to ensure that the machine is functioning properly and meets the safety requirements.