I m from Splendid Uptown, and I m going to hand over the house, where can I apply for a free home in

1. The most important aspects of home inspection include doors and windows, water and electricity, HVAC and other issues that may affect the use of life and safety in the future. Depending on the type of house, there are generally more than 300 checkpoints. For details, you can go to the standard inspection points published on the Internet by the National Home Inspector Practice Teaching Unit Fang Master.

2. Some owners themselves work in the construction industry, and if they feel that they are still familiar with the various systems of the house, they can also bring their own tools to conduct a simple house inspection

1) Plastic washbasin (water) - used to check whether the sewer pipe and floor drain are blocked.

2) Small hammer or small steel ball (tap or roll) - used to check whether the wall and ground of the house are hollow.

3) Newspaper, fire machine --- used to check the flue, whether the exhaust duct is unobstructed.

4) The multimeter --- used to test whether the strong current socket and weak current are unblocked.

5) Chalk, pen, paper --- used to mark the problem, at any time on the problems found in the process of receiving the building for written registration.

6) Feeler gauge - used to measure the width of the crack.

7) Tape measure – used to measure the clear height of the house.

8) 1 small stool and some newspapers, plastic straps, packing rope - for a long time, a break and a pre-closed sewer pipe.

The most obvious problems can be detected with these simple tools, but complex, hidden, and need to be accurately measured and determined errors, more professional tools are needed, such as tempered glass detectors, laser line markers, noise detectors, etc., which can refer to the special toolbox for home inspection of professionals.

3. The criteria for choosing home inspectors and home inspection agencies, how to say this, it is really difficult for ordinary people who do not know how to judge. Because of the work of home inspection, the inspector is required to be very familiar with the various systems of the house, and some experts in the construction industry may be proficient in water and electricity, but may know little about other systems. Without further ado, I'll give you a few references:

1) Whether the home inspector is professionally trained:

There are two criteria for judging whether a has a registered home inspector certificate, and whether the number can be verified on the China Home Inspection Network and the National Talent Network B Starting next year, the home inspector may also be registered under the China Employment Training Technical Guidance Center.

2) Whether the inspection time is about 2 hours, check whether it is according to the process and inspection point.

Check all the inspection points, about 100 square meters of blanks, it takes about 2 hours, if the time is too short, there may be problems; In addition, if the home inspector has no order and no process for the inspection, some problems may be missed, and attention should be paid to.

3) Whether there are complete special tools for home inspection.

Professional home inspection agencies generally have a special toolbox for home inspection, which contains more than 30 professional tools to check various problems; If the inspector only brings a ruler or a glass ball and only a few tools, you should also be careful, maybe you will find a renovation company to inspect the house under a fake license, in order to win your trust and then win the renovation business ......

4) Reputation and service experience of home inspection agencies.

Generally, relatively large home inspection agencies will have house inspections in a community, and you can ask neighbors and friends in the community forum to ask them to recommend; Or go to the China Housing Inspection Network to inspect the evaluation of the housing agency.

If you don't have a free home inspection, it's best to find a home inspector to help you inspect your home.

Nowadays, the general owner will find a home inspector when he goes to collect the building, so that through the professional inspection of the home inspector, it is equivalent to doing a detailed physical examination of his house, checking out the problem before repossessing the building, and then rectifying it. Last time, I inspected the house with a keen eye, and through the inspection, I found a lot of problems, and I felt that the money was well spent.

Nine steps to receive and inspect the house.

1. Wall 1. Check whether the wall is cracked. 2. Check whether there is a hollow drum on the wall, knock on the wall with a small wooden hammer or other things, and the sound made when the hollow drum is knocked is not real, and it is easy to hear. Make a mark and fill it with putty when decorating.

3. Check the putty on the wall, whether it is waterproof putty, you can bring a bottle of mineral water, splash water on the wall, touch it with your hands, see if there is mud on your hands, if not, it proves that the water-resistant putty on the wall is qualified. 2. Roof 1. Check whether the roof is cracked. 2. Check whether the yin and yang angles of the roof and wall are horizontal, if not, in the future decoration, you should first use plaster to find the low and then use water-resistant putty to level it.

3. Ground 1. Check whether the ground is flat. 2. Check whether there is cracking and anti-sand: whether there are sand particles when the ground rubs the ground with your feet.

This problem will occur when the mortar ratio or cement quality is unqualified and unevenly mixed. Fourth, doors and windows 1, check the strength of doors and windows 2, check the function of the window aThe doors and windows are smooth to push and pull, the surface is smooth and clean, there are no serious scratches, and there is no cracking or fracture of the profile.

b.Hardware accessories: complete, correct position, firm c

Sealing quality: when the door and window are closed, there is no obvious gap between the fan and the sash, and the sealing strip is not loose, does not fall off, and is not exposed. d.

Door and window frames, sash vertical, not bent eThe glass is pollution-free, no breakage, the double-glass laminated layer is free of dust and moisture, and the separator is uniform. f.

Whether the window drain hole is opened. If it is not cleared, the stagnant water will flow into the profile. 5. Circuit 1, check whether the socket and switch are set reasonably, whether the circuit needs to be transformed in the decoration, one is to see the needs of the individual, and the other is to see whether the socket and switch in the house are reasonable and easy to use.

2. Check whether each light switch and power socket can be used normally, bring a mobile phone holder to charge, or plug in the pen to check whether the power socket is energized, of course, professionals will use a special socket to check.

Buying a house is a major event in life for many people, and now the house is becoming more and more substandard, so you must not forget to inspect the house when handing over the house, and if the house inspection is not done well, it will bring a lot of trouble to the life after moving in, so that life is rare and stable, so the owners must be fully prepared before the house inspection, carefully accept, and leave no dead ends. So what should you pay attention to when inspecting a home? 1.

Wall inspection: mainly for the acceptance of hollow drum and other problems. ?

2.Hydropower:

The main thing is to check whether the hydropower can be electrified, or the problem of water leakage. The tool you need is a multimeter. The first is to check whether the water and electricity in the house are connected

In addition to checking whether the wire is energized, the main thing is to see whether the wire meets the national standard and whether the cross-sectional area of the wire meets the requirements. Generally speaking, the electrical wiring at home should not be lower, and the air conditioning line should reach 4 ??mm2, otherwise when using the air conditioner, it is easy to overheat and soften.

3.Waterproofing: Mainly for the acceptance of the kitchen and bathroom.

The method of acceptance and waterproofing is: use cement mortar to make a sill to block the door of the kitchen and bathroom, take a plastic bag to cover the sewage or drainage outlet and bundle it, and then put water on the kitchen and bathroom floor, shallow (about 2cm high). Make an appointment with the owner downstairs to check whether there is water seepage in the ceiling of the kitchen and bathroom of his home after 24 hours.

4.Acceptance pipeline: Acceptance of drainage and sewage pipelines.

5.Ground level: The ground level test is to measure the horizontal error between the indoor ground farthest from the door and the ground inside the doorway.

How to test the level: go to the hardware store and buy a small transparent water pipe, with a length of about 20m, and fill it with water. Draw a sign at the door 1 m from the ground or 1 meter, then adjust the water level of the water pipe to the height of this sign and find someone to fix it in this position.

Move the other end of the hose to the room furthest from the doorway. Then look at the height of the water pipe at that point, and then make a sign. 6.

Inspection of doors and windowsThe main thing is to look at the tightness of the windows and balcony doors, which can be confirmed by checking whether the sealing strip is firm. The balcony door generally depends on the horizontal difference between the inside and outside of the door.

7. ?Layer Height:

The method is as simple as measuring the ruler along the dark angle of two of the walls. You should measure multiple places in your home. Generally speaking, the height of the floor is an acceptable range; If it is lower, you have to consider that this kind of housing will make you have to live in a depressing environment in the future.

The above is what we must pay attention to when inspecting the house, the above several house inspection knowledge will be helpful to every owner when receiving the house, in general, the house inspection should be a very important thing, because only before the signing of the house problems found, in order to investigate the real responsible person, to maximize the protection of their own interests.

Hello, you said free house inspection activities, at present, many ** networks will have free house inspection activities, you can check it on the Internet, we all know that the quality of the house is getting worse and worse, so many people have to inspect the house when handing over the house, and the house inspection is also a step that we can not miss when handing over the house, so what should we pay attention to when inspecting the house? Let's take a look. (1) The acceptance of wall, roof and ground finishing projects is the most important thing to check the hollow drum, because it will directly affect the cost of later decoration, and the developer should be responsible for maintenance if there is a problem.

The hollowing of the wall will cause cracking and falling off in the later stage, the hollowing of the ground will affect the loosening of the floor tiles and break, and the wooden floor will cause abnormal noise of the floor after loosening. For wall cracks to distinguish the cause, usually the crack can not be repaired by the developer, by the decoration company during the construction of the good as well, the structure of the crack to find a professional judgment. (2) The acceptance of the door and window project mainly depends on the quality of the appearance, such as:

The frame is damaged, bumped, scratched, and the damage to the frame is difficult to restore the original surface quality. Scratches on the glass should be qualified within 3 strips of width of 10 cm per square meter, and attention should also be paid to the quality of the insulating glass, especially in winter, whether there are water traces inside the glass. (3) The acceptance of the electrical part is mainly to check the power supply part, the weak current is not opened at this time can not be checked, the wiring of the power socket should be correct, not zero reversal, pay special attention to whether there is grounding, no grounding to find the reason.

4) The inspection of the equipment part should be carried out by the developer or the property owner in charge of the initial experiment, and teach the owner to use it after the owner himself in the operation. (5) Before the inspection of the closed water of the bathroom, the developer should be notified to release the water 24 hours in advance, so that it can be directly inspected during the inspection, of course, it can also be inspected by the construction team during the decoration after entering the site, but before that, the bathroom shall not put items that may damage the ground. (6) The part that is not easy to inspect:

The area of the house, the structure of the house, the waterproofing of the roof surface, and the weak current are usually installed and debugged after the decoration is completed. The above matters related to house inspection activities are introduced here, and here is a friendly reminder: check the sales contract, generally if the error with the actual measured area is within 3%, it will not be considered, and if the error exceeds 3%, the compensation agreement signed by the two parties shall prevail.

It is recommended that the error between the agreed house area and the actual measured area be 2%, preferably no more than 5%. I hope my answer will be helpful to you, if you think it's powerful, give it a thumbs up, and I'll answer more attentively in the future, I wish you a happy life.

Now the quality of the house is more and more not up to the requirements, many are cutting corners, so we often hear that many communities have to hand over the property owners to protect their rights, we all know that the so-called delivery is the developer in the contract within the delivery period, will meet the agreed delivery conditions of the house to the buyer, so it is best to ask a professional house inspection to help inspect the house, so what are the precautions for the house inspection? 1.Bring a toolkit when handing over What are the precautions when it comes to handing over?

First of all, you must prepare the tools, there are tools to build the house, of course, the house inspection also needs to have the tools for the house inspection, you must bring a small hammer, hose, and electric pen. These are must-have tools. Bring your tools, and think about how they will be useful.

The small hammer is used to knock on the wall, whether there is a hollow drum or not. The hose is used to check the slope of the floor drain and drainage. Needless to say, the electric pen is naturally to check the switch circuit socket.

2.Check the drawings carefully when handing over There is a special place to pay attention to when handing over the house, that is, the inspection of the area of the house. One square meter can easily cost tens of thousands of yuan, and for the sake of money, you must also carefully check the comparison.

Also, pay attention to the size of some special places. For example, in the kitchen and bathroom, the refrigerator should be placed in the kitchen, and the washing machine should be placed in the bathroom, and these should be considered to avoid leaving insufficient space for space. In addition to these, it is also necessary to consider whether there is a change in the place on the drawing, and the location of the change should be recorded to avoid some changes in some places.

Especially the place of some important facilities. If the builder makes changes, be sure to ask the developer about it. 3.

Pay attention to the water and electricity pipes when handing over the house In the kitchen, check the location of the faucet and whether the drainage pipe is unblocked. Whether the location of the faucet is reasonable or not, it is mainly convenient for future use. For drain pipes, the main check is whether blockages have occurred.

It is also necessary to pay attention to the gas pipeline, which is generally an open pipe, and once the gas leaks, it must be repaired in time. In the bathroom, the main thing is to check the unobstructed drainage pipes. Because the drainage system of the bathroom is the most important.

Also pay attention to the location and number of faucets, one is used for washing and bathing, and the other is used to lead to the washing machine. To check the electricity of a new house, consider the kitchen, bathroom, bedroom, and living room, all of which should be considered. It is necessary to consider not only whether there is electricity in the lamp heads and sockets of each house, but also the location of each socket.

These are some things to pay attention to when closing the house, and here is a reminder about the closing time. Generally, the real estate developer notifies the small owner that the delivery time is relatively early, and it is recommended not to be in the first.

1. The next day, go to collect the house. Because there were a lot of people who came to collect the house at the same time on those two days, the people who accompanied the acceptance of the house would not have too much time to accompany the house carefully. You may wish to choose the third or fourth day.