How to accept the three piece bathroom set?

1) Check whether the upper mouth of the washbasin is flat.

2) Check whether the pull-up drain plug is flexible.

3) Check whether the plating layer of the chrome plating is damaged.

4) Plug the drain plug, open the faucet and put water into the overflow hole, close the small faucet to check whether the water hole is unblocked and whether there is water seepage in the lower part of the washbasin. After confirming that there is no seepage, remove the plug and open the faucet for full water discharge, observe whether the discharge is smooth, whether there is leakage, and the full water level discharge should not be less than 3 times, and those without leakage are qualified.

Acceptance of the bathtub.

1) Whether the flat surface on the bathtub is flat.

2) The tub drain plug should be lower than the bottom of the basin.

3) Whether the plating layer of chrome plating parts is damaged.

4) Whether the sealing paste at the junction between the side of the upper mouth of the bathtub and the wall has been filled in densely.

5) Whether the manhole position is easy to operate.

6) The operation of the water test and the inspection washbasin is the same.

Acceptance of toilets.

1) Open the angle valve to check whether there is leakage at the connection port.

2) Check whether the automatic valve in the box is flexible in opening and closing.

3) Check the distance between the water level height and the overflow pipe after the water in the box is full.

4) Press and hold both sides of the toilet with both hands and shake it slightly to see if it is stable.

5) Put a ball of toilet paper in the toilet, open the plate water hole for flushing observation, and check whether there is leakage in each interface. Continuous flushing and discharge not less than three times, if the discharge is smooth, and there is no leakage at each interface, it is qualified.

Toilets, bathroom cabinets, bathtubs?

Which three pieces and brands will be reported to you one by one.

The three-piece bathroom consists of a bathtub, washbasin and toilet. It is the most important hardware facility in the bathroom, and it is also the one that should be carefully paid attention to when purchasing. The high-quality bathroom three-piece set has a smooth, delicate glaze and no sand blistering; The shape is elegant and exquisite, smooth and concise; The color is elegant and matches the color of the bathroom wall and floor tiles.

There are many styles of bathtubs, which are divided into flat lying type, sitting type or comprehensive type, and you should consider the size of the bathroom space and your favorite style when purchasing. The main materials of the bathtub are acrylic, steel plate, cast iron, synthetic marble, etc. Acrylic bathtub is made of a new type of chemical material, light texture, many color styles, good heat preservation, cheap, and quite popular abroad.

Steel plate bathtubs have low cost, poor heat preservation and easy deformation, but their life is longer than acrylic. Cast iron bathtubs are bulky and difficult to install, but the surface density is fine, the light is blurred, and the service life is long. Synthetic marble bathtub is a new development of products, containing natural stone components, bright color, wear-resistant, impact-resistant, three-piece set is made of integrated materials, the color is very coordinated.

Washbasins and toilets are mostly matching, and most of the materials are ceramic products, but there are also glass fiber products. In terms of styling, it is dominated by lines. Toilets are divided into flushing type and pumping type according to the drainage method, and the general wall-mounted low-water tank toilet is a pumping type, and most of them have a silent effect, making people feel more comfortable.

The three-piece bathroom set is divided into low, medium and high grades, and you can choose the appropriate material and brand according to your own economic ability. Domestic products are relatively low in price, and there are some good brands; If you buy imported goods, you must pay attention to the fact that this kind of goods are fully imported and Sino-foreign joint ventures, and some imports. The so-called partial import usually means that the toilet and basin in the three-piece set are produced domestically, while the bathtub is imported.

The fully imported style is new, the color is new, and it belongs to the high-end product. However, whether you choose domestic, Sino-foreign joint venture, or fully imported products, you must pay attention to the consistency of the color of the three-piece set.

Look at the sanitary ware as a whole.

Well-shaped sanitary ware should not only be beautiful, but also conform to ergonomics and be comfortable to use. The manufacturer's tooling, equipment, and design capabilities are the determining factors. High-level manufacturers generally use imported molds.

Look at sanitary ware accessories.

At present, good water parts are made of imported PVC materials and vacuum irrigation technology, and the anti-corrosion, anti-rust performance and anti-leakage performance are greatly improved. The water parts of famous brand sanitary ware are supplied by professional manufacturers.

Look at the glazed surface of the ware.

The brand of the glaze, the thickness of the glaze layer and the firing process directly determine the effect of the glaze of the sanitary ware, using imported glaze, the surface of the glaze thick sanitary ware is smooth and delicate, the texture is plump, crystal clear, it looks very comfortable, and the self-cleaning ability is strong, and the water permeability is low. The sewer pipe and the inner wall of the water tank of the high-end sanitary ware are also glazed, which is very important to prevent the toilet from hanging dirty, and whether the sewer pipe is glazed is an important sign to judge the grade of the sanitary ware.

Fourth, look at the body of the sanitary ware.

The quality of the green body directly determines the water permeability of the ceramic. At present, the firing process of ceramics has been greatly improved, and most brands use high-temperature pottery fired at more than 800 degrees.

The length of the high-temperature tunnel kiln directly determines the texture of the ceramic, the longer the tunnel, the longer the time from heating to cooling of the ceramic, the temperature change is small during the firing process, the product is not easy to crack, and the quenching and heating resistance is good; The high-temperature tunnel kiln is short, the process from high temperature to cooling is short, and the texture of the fired ceramics is relatively brittle and easy to crack.

The cost of high-temperature tunnels is very high, with an average cost of nearly 150,000 yuan per meter, so some small-scale manufacturers directly cool outside the kiln, and the difference in quality is even greater. In addition, only if the kiln is large enough to fire a high water tank, it is more water-efficient and cleaner. Therefore, the selection of the embryo body also has a great impact on the quality of sanitary ware.

1.Don't buy a double-bar towel rail.

Don't buy a double-rod towel rack in the first place. A double-bar towel rack may look good and you can hang two more towels, but that's not the case. Towels for different purposes cannot be hung together, which means that two towels can be hung on a towel rack, and the extra rod is not needed and is not very practical.

2.The glass shelf for cosmetics must be ***.

The glass shelf for cosmetics in the bathroom should be bought, otherwise too many heavy objects on it will easily lead to damage.

The cabinet in the bathroom should have metal feet suspended underneath, otherwise it will be difficult to repair the water leakage in the future, and it will be easy to clean at ordinary times.

The bathroom must be waterproof, including the floor and walls. The size of the washbasin and faucet should match.

3.The waistline and tiles should be thought out in advance.

Bathroom tiles with waist line and tiles should be thought about in advance, and other things will be installed in the future so as not to block or conflict. If you use toner to match the color of tile grout, it is best to debug a little first, and then decide the amount.

4.The slope is wider so that the water can run clean quickly.

Don't pay attention to the floor just because the bathroom is a small place, be sure to pave the tiles. The slope of the bathroom floor should be considered before laying bricks, according to the slope of the national standard can not achieve the effect of rapid drainage, and if you use an anti-odor floor drain or ultra-thin floor drain, it will greatly aggravate the difficulty of drainage. Some people say that the slope is unsightly, but in fact, on the contrary, the slope is larger, and the water can be quickly cleaned.

The feel can only see whether their glaze is smooth, but also to see whether the inner wall of the pipe is completely glazed, it is useless to feel good, or to see the quality and after-sales. It's best to go up and sit down when you buy it, see if it's comfortable, choose a few more, it's not harmful to compare, don't be a suspect.

First, first see whether the appearance style meets your own requirements. Second, look at the quality, whether the color is smooth and delicate. The quality of the internal water above and below water. Then there is the amount of water discharged and the effect of drainage. FYI.

Now some building materials city will often carry out some ** activities, sometimes if you buy a full set of goods, you can get a relatively large discount. I took a fancy to a set of porcelain sanitary ware, the appearance is very good, if it is installed, it will definitely look clean and beautiful, I am very satisfied. But at the same time, I was worried that the quality of such a relatively cheap product was not up to par.

How can I check the quality of these sanitary ware?

A: The selection of porcelain sanitary ware mainly pays attention to the following points:

1 See if there is cracking. Use a thin stick to carefully tap the edge of the porcelain to hear whether the sound is crisp, when there is a "hoarse" sound, it proves that the porcelain has cracks.

2 See if it's smooth and smooth. Place the porcelain on a flat platform, move in all directions to check whether it is smooth and symmetrical, whether the installation surface and the surface edge of the porcelain are smooth, and whether the installation hole is uniform and smooth.

3 Look at the glaze quality. The glaze of high-quality sanitary ware must be delicate and smooth, and the glaze color must be uniform and consistent. It is particularly important to see the quality of the glaze that can be splashed with water, and a few drops of colored liquid on the glaze are wiped with a cloth, and dried with a damp cloth after a few seconds, and the glaze is checked without dirty spots.

In addition, the porcelain also has water absorption, and the toilet also has performance requirements such as sewage discharge, water consumption, noise, and water seal function. These performance consumers are generally difficult to check and judge, should try to buy products with quality and reputation assurance, and check the product certified by the relevant state departments with the recent effective quality inspection report stamped with the CMA seal.

How to choose sanitary ware.

Toilet class: trick one: the glaze of a good toilet is shiny, very slippery, you can feel it by touching it with your hand, a good toilet is heavier, the porcelain density is higher than the teaching, the water absorption rate is low, knock it with your fingers, "dang, dang" rings directly, and the sound is more crisp!

Trick 2: Trick 2: How to measure the pit distance, after figuring out the sewer pipe structure, the next step should be the pit spacing of the water output of the toilet.

The toilet is generally divided into two kinds of water outlets: horizontal row and ground discharge, and the horizontal row can only be installed with a direct flush toilet, and the ground row can choose to flush or siphon, depending on the pipeline structure. The distance of the horizontal row is generally 180mm, and the distance of the ground row is slightly more complicated, with 200mm, 305mm, 400mm, 580mm and so on. The measurement is very simple, the distance from the middle of the drain pipe to the wall is the pit distance, and the same is true for the horizontal row.

Trick three: siphon is divided into four kinds, let's talk about the classification of siphon, siphon because the flushing effect is better than the straight flush, the water seal is high, and the odor insulation effect is good, so it has been vigorously promoted in the market. There are four types of rainbow punches, as shown in Figure 5, the flushing siphon, which is the most basic siphon, and the other siphons are evolved from this form.

This siphon does not have a spray auxiliary punching, and the water level of the siphon is a little higher than that of the jet siphon, and it must exceed the position of the blue line in the figure to cause the siphon to occur, and the amount of flushing is also a little more than that of the jet siphon.

Final recommendation: If it is a new house, choose jet siphon type, and choose Wrigley with higher cost performance.

Color, intensity, craftsmanship, details. Expensive is not necessarily good.

When choosing a toilet, pay attention to the flushing method and water consumption. There are two common flushing methods for toilet flushing: direct flushing and siphoning. Generally speaking, flushing toilets are noisy and odorless. The siphon toilet is a silent toilet, with a high water seal and is not easy to smell back.

Moreover, bathroom hardware is used frequently, and buying a set of high-quality products brings a lot of convenience to daily life.

Distinguish the advantages and disadvantages of bathroom hardware Step Method Bathroom hardware raw materials Excellent products: generally use fine-polished pure copper, high-quality zinc alloy or titanium alloy as raw materials, with strict structure, heavy weight and thick feel. The raw material is pure copper.

Inferior products: generally use inferior zinc alloy recycled materials as raw materials, and cut corners to reduce costs, loose structure, light weight, light feel.

Bathroom hardware die-casting, finishing technology excellent products: the use of large-scale precision computer-controlled die-casting machine tools and digital precision machine tools, the surface of the blank is smooth, flat, no pores, silk defects and other phenomena, grinding, polishing when the process is rigorous, the process is varied.

Inferior products: the use of small die-casting machine and simple machine tools, insufficient pressure, the surface of the product wool Pi has pores, filaments, cracks and surface inequality, rough polishing process, simple process.

Bathroom hardware plating excellent products: in strict accordance with the national electroplating process standards, the use of imported raw copper, and after copper plating, nickel plating, chrome plating three process coating, bright luster, thick visual sense, long-term use is not wear, rust, blistering or peeling, lasting new. The structure is compact, the coating is uniform, the "color surface" is crisp, the thickness of the coating is generally more than 30 microns, and there are no scratches and burrs on the surface of the coating.

Inferior products: the electroplating layer is thin and uneven, the structure is loose, the binding force is poor, the luster is dull, due to the direct chrome plating on the blank, the surface is very easy to rust, wear, blister, and peel off after a period of use. The thickness of the coating is less than 20 microns, and the material inside is susceptible to air oxidation, and there are many scratches and burrs on the surface of the coating.

Bathroom hardware accessories are excellent: fasteners are made of stainless steel screws or copper screws, and glass products are made of original imported glass rings, plates, uniform thickness, high transparency, and clear visual sense.

Inferior products: fasteners are made of iron screws, which are easy to rust, and glass products are made of domestic low-grade products, with uneven thickness, low transparency, and turbid visual sense.

Inferior products: the packaging is made of poor raw materials, the printing is rough, the trademark is not clear, eye-catching, and the manufacturer is generally not indicated in the packaging, and even the "three nos" products with white packaging.

Bathroom hardware after-sales service excellent products: generally have a solemn 3-5 years of quality assurance commitment, and have a valid quality assurance certificate, inspection logo, installation instructions and the manufacturer's address **.

Inferior products: There is no after-sales service at all, and there is no valid installation manual or quality assurance certificate for the internal cooperation.

Distinguish the advantages and disadvantages of bathroom hardware Precautions: The installation of hardware is usually after the tile is paved, drilling holes in the tiles, and then embedding the wooden wedges into the holes, and then fixing the hardware pendants with screws or expansion screws on it. Once installed, it is inconvenient to change the position, so we must fully consider the living habits of family members, determine the position and height of the hardware, and determine the accurate installation position before starting the installation.

The material of the hardware pendant is different, and you should pay a little attention when installing. Many hardware parts are plastic plated metal layer, do not twist hard during installation, otherwise it will be broken, and do not hang wet towels and other heavy items during use, otherwise it is easy to break.