How to install the upper cover switch of Joyoung rice cooker?

If the Joyoung machine fails, you can contact the local after-sales service to deal with it and replace the original parts.

Summary. First, your rice cooker has a mid-opening function, you use this function when setting up, because it is automatically controlled, so when the time comes, the pressure is maintained, the air is automatically vented, and the lid can be opened halfway.

Second, when you are in use, the sealing ring of the lid is not placed, or the exhaust valve is not in place, and the water has been vented after boiling, resulting in the inability to maintain pressure, so you can open the lid halfway.

Joyoung rice cooker automatically opens the lid.

What the situation. First, your rice cooker has the function of opening the lid halfway, you use this function when setting up, because it is automatically controlled, so when the time comes, the pressure is maintained, and the lid can be opened halfway Second, when you make the hole used, the sealing ring of the lid is not put in place, or the exhaust valve is not in place, and the water has been exhausted after boiling, resulting in the inability to maintain pressure, so you can open the dry lid of the belt halfway.

Excuse me. Long waiting.

Joyoung electric pressure cooker inner cover installation method.

Just put it on as it was.

Summary. Hello dear, it's a pleasure to serve you <>

According to your problem description, it should be that the rice cooker has experienced a performance failure. It is possible that water has entered the main board of the rice cooker or is close to water vapor. This phenomenon may be caused by incomplete data reading by the chip in the motherboard, data loss in the memory, and data corruption.

Hope it helps you <>

Joyoung rice cooker shows how to deal with the lid opening.

Your question has been received, it will take a little time to type, please wait a while, please don't end the consultation, stupid you can also provide more effective information, so that I can better answer the <> for you

Hello dear, it's a pleasure to roll and serve <> for you

According to your problem description, it should be that the rice cooker has experienced a performance failure. It may be that the main board of the rice cooker is staring at the water or near the water vapor. This phenomenon may be caused by incomplete data reading by the chip in the motherboard or loss of data in the memory, or data corruption.

Hope it helps you <>

Dear, you can try to use the hot air of the hair dryer at home, blow the position of the motherboard of the rice cooker, and indirectly help the motherboard to build the volatile moisture, remember to operate the power off yo <>

If it's caused by water ingress, it's not good for Mu Buli.

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your work is very important to me, and your support is also the dynamic and vertical momentum of my progress. Finally, I wish you good health and a good mood!

1. We can remove the old key switch first. We unplug the rice cooker and open the lid of the rice cooker. Next, we use a slotted screwdriver or other tool to insert the gap between the side of the key switch of the rice cooker lid and the main body of the rice cooker, pry the key switch outward and remove it.

Install the button Monobi switch. The failure of the key switch is mostly caused by the broken spring, we can replace the old spring and prepare a new one. Judge that everyone will align the new spring with the protruding part in the middle of the key switch and press and fix it, and then put the other end of the spring into the groove at the position of the installation card slot, put the left side of the key off in the card slot, and then press the right side of the switch to the left with a slotted screwdriver, and put the right side of the switch into the installation card slot.

The installation of the panel switch button of the rice cooker is more complicated, so you should ask a professional to disassemble and install it.

Joyoung iron kettle rice cooker lid disassembled as:

3. Next, open the lid of the rice cooker and take out the rubber with self-tapping screws, as shown in the figure below.

4. Remove a screw at the exhaust hole on the lid of the rice cooker, as shown in the figure below.

5. Next, remove the screws on the sealing ring and ask for details, as shown in the figure below.

6. Then remove all the screws on the rice cooker panel, as shown in the figure below.

7. Finally, the lid of the rice cooker is removed, as shown in the figure below.

Joyoung rice cooker inner lid removal: please lift the upper cover, there is a button above, press the buckle up to remove the inner cover, the steam valve is removed on the inside of the inner cover, after the inner cover is removed, rotate counterclockwise and unscrew it.

1.If the lid is removable, it can be removed and cleaned directly.

2.If it is non-detachable and needs to be disassembled, first remove the small box containing water at the junction between the lid and the pot.

3.Then unscrew the screw wire and remove the buckle of the clasp box. There is a small buckle at the screw, pull the small buckle down hard.

4.Then twist the lid a little hard left and right to remove it.

5.But this method is prone to damage to the rice cooker, and many rice cookers nowadays are designed to be detachable and easy to clean. It can be replaced with a new type of product, and the difference is not very large.

Rice cooker sticky pot reason:

1.Nowadays, the inner material of most rice cookers is very good, basically the rice cooker will not stick to the pan, so the possibility of sticking to the pan is that the temperature control thermistor is damaged, it can be replaced, if it is an integrated block, replace the integrated block.

2.If we don't add enough water when cooking, it will also cause our rice cooker to stick to the pan, and if this happens for a long time, it may reduce the practical life of our rice cooker.

3.Some people use a clean steel wool ball to wash the rice cooker liner when cleaning it, so this destroys the coating of the rice cooker liner and causes the liner to no longer be smooth, which will cause it to stick to the pan when cooking rice.

The installation method of the upper cover of the Joyoung rice cooker is as follows: 1. Install the switch on the lid of the pot, and ensure that the switch is completely aligned with the lid of the pot; 2. Match the holes of the switch and the holes of the lid one by one, and fix them with screws; 3. Insert the switch into the interface and confirm that the switch can work normally; 4. Install the wiring cover of Lu Qiao on the pot lid and the installation is completed.

Hello dear,!<

Separate the lid from the pot first, then unscrew the screws on the lid, and then use a small zigzag cone to slowly pry along the edge gap of the lid. Rice cooker, also known as electric cooker, rice cooker. It is a cookware that uses electric energy to convert into heat energy, and has a variety of operation functions such as steaming, boiling, stewing, boiling, and simmering for food, which is easy to use, safe and reliable.

It can not only cook food, but also keep warm, clean and hygienic to use, no pollution, save time and effort, and is one of the indispensable tools for the modernization of housework. During World War II, common rice cookers were divided into three types: automatic heat preservation, timed heat preservation and new microcomputer controlled. I hope my answer is helpful to you, and finally I wish you good health and a happy mood again!