How to swipe XT502, how to swipe XT502

1. The premise is that RC has been brushed.

3. Press the Volume Up camera button and the power on button at the same time, and wait for the phone to vibrate and let go.

4. There is a column of menus in recover mode to select wipe through the scroll wheel of the mobile phone, and press the scroll wheel to enter the submenu to select Clear user data, and execute another wipe in the same way

5. After the execution, select "Install Zip from SDCARD" and press the trackball to confirm.

6. After confirmation, enter the submenu and select "choose zip from sdcard" and press the trackball to confirm.

7. After confirmation, the files of the SD card will be listed, and the card swipe bag that you just put in will be selected, which is generally .zip at the end, press the trackball to confirm.

8. After confirmation, enter the submenu and select yes-install, and press the trackball to confirm.

9. After confirmation, start flashing, a progress bar will appear in the process, and there will be corresponding prompt information after the flashing is completed.

10. Select the Restart System option in the menu item.

PS: If you are afraid of problems, you can execute two wipes again after the flashing is completed

Card swiping is relatively simple.

This tutorial is suitable for zip format packages that are also partially swiped, or swiping power-saving kernels and other special needs.

The card swiping steps are generally as follows:

1.Prerequisite.

The appropriate base package, such as what you are currently with, or what kind of base package depends on the firmware you are flashing the author's requirements.

Appropriate recovery, flash your recovery (hereinafter referred to as RC) to the appropriate RC, for example, or other suitable ones.

It's usually placed in the root directory.

In mode, you can use the power button, volume button, back button, trackball and other keys to control, different RC situations will be different.

To get to the point, first turn off the computer, and enter the RC mode according to the phase key + volume plus + power on button.

First execute two wipes, that is, select the sentence at the beginning of wipe, and the interface Shiming appears: check "yes-delete all user data" and press the trackball to confirm!

Done? Now I choose the second choice "wipe cache partition" with a trackball and confirm it by a trackball!

Enter the interface, select "yes-wipe cache", and press the trackball to confirm!

All right? Now check the fifth item "install zip from sdcard" and press the trackball to confirm!

Now go to the interface and check "choose zip from sdcard" and press the trackball to confirm!

Check "yes-install is the name of the ROM you want to farm"! Press the trackball to confirm!

In the flash, a progress bar appears, and the time is about three or four minutes.

After the progress bar is finished, if the flashing is successful, it will return to the RC interface.

Whether it is successful or not, there are hints in the English subtitles below, if you are slightly familiar with English.

After returning to this search interface, depending on the requirements of the firmware author, you can perform another wipe or directly select Reboot System Now on the RC main interface to boot the computer.

Blade,Saipan forum or something has a flashing tutorial.。