The computer in my office was frozen by the IT department, and I didn t have a password, how could I

One: You have installed a new program, the software prompts you to restart the computer, do not click the "OK" button at this time, select "Restart later". Then select "Restart Computer" in "Start Shutdown System", note that you must hold down the shift button at this time, so that the computer will directly reload the system program, thus bypassing the protection of the restore wizard.

The specific method is to right-click the restore wizard icon in the lower right corner of the taskbar, select "Parameter Settings Change Password" in the pop-up menu, enter the old password in the dialog box, and fill in a few numbers such as 123456; Enter the new password in the new password box, fill in the 371042 here and click the "OK" button at the end.

Since we are entering the password randomly, so the old password will not be correct, at this time a dialog box will pop up, prompting that the password is incorrect, pay attention to do not click the "OK" button, quickly run the hexadecimal file file winhex, click the "RAM" in the "Tools" menu, and find the "main memory" under hddgmon in the open window, where hddgmon is the process of restoring the wizard.

Finally, click on the "Search for Text" menu option in WinHEX and add the fake password 371042 you have filled in casually to the window that opens. After clicking "OK", the real password will appear in front of us!

Principle: After entering the password, the software will use its internal pre-defined method to calculate the real password, and compare it with the entered password, and this comparison process is carried out in memory. Since WinHEX has excellent memory capabilities, you can find them by searching for the entered strings in memory.

In general, the comparison of real and fake passwords will be very close so that we can easily spot them.

Method 3: Use the Restore Genie password reading software.

Through method 2: the vulnerability that the restore wizard has a plaintext password stored in the memory, restore the wizard password reading software, and use the software to easily get the password of the restored wizard. The software is very simple to use, as long as you open the "Change Password" window of the Restore Genie or the window of "Check Administrator Password", and then you don't need to enter any password, as long as you click the "Read" button of the software, the password will be automatically read from the memory of the Restore Genie.

Use Freezing Point Terminator to cancel the restore directly, no password required. You can modify the system and then restore it. You can come to me if you need to.

Find your IT department, freeze their settings, they maintain, and find out what remedies we can give you. If you change it, you don't care about it after you change it, is it worth it?

Here are 3 ways to do this:

1.Generally just look at you c: Is the setting save file below freezing point still there? The solution is: overwrite your C: Below!!

You can start it on a USB flash drive and copy this file from the root directory of the C drive on another computer with Freezing Point. Put it in the root directory of the C drive,(Note,Know its password...) It can be solved!

2.Another trick is to uninstall completely, reboot and press F8 to enter the DOS state of XP, and enter the command fdisk mbr

Press enter and restart your computer.

Note that there is a space after the fdisk. ）

Then, run the freezing point installer, and then an uninstall screen will be displayed with the word uninstall on it, click to uninstall it completely.

3.Redo it (don't try it if you're not a master).

If your system disk is in the C drive, there is a way for the landlord to try. Let me tell you briefly:

Enter Dwarf DOS mode.

Ghost backup your current system disk C drive, reinstall Windows in your C drive, install Freezing Point, don't set a password, turn off protection, and then restart the computer to copy the root directory of the C drive in safe mode.

You'll have to use Ghost Explorer to drag this to your first step of gho file and overwrite that!

Finally, Ghost is restored to the C drive. Restart your computer!

In this way, the freezing point restore will be set to the temporary unprotected state, that is, the red cross state, you can suspend the protection and uninstall it!

Buy a system disk. It's only 10 yuan. Set boot to cd***. Save. Then one-click installation.

Freezing point belongs to software restoration, just reinstall the system directly.

The official version because there is only one month of the service life of the friend banquet shed,What is provided here is the cracked version of the ** after direct installation,The default provided c d e three disks for protection,You can set it according to your own requirements,Start the software ctrl+ait+shift+f6 to set the password。

Three options, the first is the protection state, the second is the free option, the third is the non-restore state, such as the system is in the protected state, we choose the second option, the default is 1 This 1 refers to the unprotected state after the machine is restarted, when the machine is automatically transferred to the protection state after the second restart, then the operation we do after the restart will be automatically protected when the second machine is restarted, and the third unprotected state is selected without introducing it :)

When you see that the freezing point chart is constantly flashing auspicious red X, it is not in the protection state, so it is better to pay attention to your settings!

Format the C drive from the system done.

Remove the win7 system user login interface (default user automatically logs in) 1, enter "netplwiz" in the start menu search box and press enter to open the advanced user control panel;

2. In the Advanced User Control Panel, uncheck the item "To use the machine, the user needs to enter the user name and password (e)";

3. The system will pop up a pop-up window asking you to enter the default username and password to log in to the system, and click OK after entering;

4. Restart Windows 7, you can find that the system automatically logs in as the default user, what you need to do now is to re-select the check box in Article 2.

Don't know the password? What is the default password, you will know that it is piracy at a glance, and Freezing Point should not use piracy.