How to use the kilogram scale, how to use the kilogram electronic scale

8.How to convert kilograms to kilograms on electronic scales.

Here's how to use the scale:1. Place the electronic scale on a horizontal table and place it stably.

2. Turn on the power supply, the power switch position is usually located in the lower right corner of the electronic scale, do not put the items on the weighing pan, and wait for the display screen to automatically clear to zero.

3. If the weight of the power just turned on is not zero, please wait for a while, or turn the power back on to make it zero.

4. Enter the unit price of the item, and place the product on the electronic scale to calculate**.

How to use electronic scales1. Maintain good weighing habits when using, and place the weighing goods in the middle of the electronic platform scale as much as possible, so that the platform scale sensor can balance the force to avoid the uneven force of the weighing platform and the fine tilt resulting in inaccurate weighing and affecting the service life of the electronic platform scale.

2. Check whether the horizontal bubble is centered before each use to confirm the balance of the scale and ensure the accuracy of weighing.

3. When weighing, overload should be avoided to ensure that the electronic platform scale is not damaged and the measurement is accurate.

4. Keep the sensor clean and free of interference, so as not to cause inaccurate weighing and hopping.

5. Keep the wiring firm to ensure normal use.

6. When weighing, the scale body should avoid contact, collision or vibration with other items.

Remove the battery baffle on the back of the electronic scale, put the dry battery into it, and pay attention to the fact that it is best to choose an alkaline battery, so as to avoid battery leakage when the electronic scale is not used for a long time, which will damage the electronic scale.

1. When weighing, please put the scale on a hard and flat ground.

2. When using an electronic scale, in order to ensure accuracy, test whether the power is sufficient before use.

3. There is a toggle switch at the bottom of the scale, and the measurement unit can be selected in kilograms or pounds, and kilograms will display "kg"; The pound will show "lb".

4. In order to avoid affecting the accuracy of weighing, please do not place the scale on the carpet or soft ground, stand evenly on the scale surface, and keep your body balanced.

5. The feet must be balanced to ensure the accuracy of the value.

6. The headache of the mechanical health scale is that the pointer will be off-aligned, and it needs to be adjusted frequently to ensure that the pointer is accurate, and also pay attention to the adjustment before use.

7. You may wish to shake a few times before use.

8. After the scale surface is stable, the LCD will display the weight measurement, and the current weight value will appear after the screen value is stable.

9. When the test person can walk down the scale, the LCD screen will return to zero later, and the next weight test can be carried out.

10. When "o-LD" is displayed, it means overload, that is, the weight has been out of 150kg. When the person walks off the scale when the overload is overloaded, the scale can resume normal operation, and the "o-ld" will disappear automatically.

The method of adjusting the weight and kilogram of the electronic scale is as follows:

1. Turn the electronic scale over and Pei Nian, at the back of the electronic scale, there is a small dot of different colors, which is the button to change the settings.

2. You only need to press this small button with the tip of your finger, and you can change the current unit display when you hear a click.

Electronic scale maintenance method:

First, it is necessary to keep all parts of the electronic scale free of dust and oil, keep the movable joints flexible and free, and prevent corrosion. In addition to moisture-proof scales, electronic dry scales should be used in a ventilated and dry environment, the temperature should not be too high or too low, due to the characteristics of the sensor, the characteristics of electronic components, the characteristics of the plastic shell determines the service life.

Second, the electronic scale is a precision and valuable instrument, it is recommended that the user develop the necessary management system, the implementation of special personnel, special management, dedicated, the establishment of the necessary use and maintenance records, long-term do not need to be stored at a fixed point, sunscreen, moisture, dustproof.

3. Avoid the impact of the electronic scale by violent push. When the staff is operating, the force should be appropriate when clicking the button, and the key should not be slammed with a sharp object, because this will use the dough to crack, and the source will cause moisture and dust to enter the scale body and instrument.

The kilogram scale can be weighed by electronic scale, and the specific steps are as follows:

1. Turn on the electronic scale, and then put the item on it to weigh. (as shown in the image below).

2. According to the calculation formula of electronic scale and kilogram, adjust the number in the black box to 2. (as shown in the image below).

3. Then read the bottom number is the city catty, for example, one kilogram is two catties. (as shown in the image below).

Precautions for the use of electronic scales:

1. Although the anti-collision limit measures are taken in the structural design of the load cell and the electronic scale, the excessive collision will cause the load cell to be damaged before the limit measures take effect, so that the electrical parameters change, and the measurement accuracy of the electronic scale is affected.

2. The national standard Li Yuanju grade electronic scale requires the accuracy index to be guaranteed within the ambient temperature of 0 to 40, and if the ambient temperature exceeds this range, the weighing accuracy of the electronic scale may be affected.

3. Regarding the electronic scale weighing 15kg and the graduation value of 5g, the oscillation and wind force have little impact on the weighing accuracy. For electronic scales weighing 200g and indexing values, oscillation and wind force will cause the number to jump. <>

How to use the scale:When weighing, the left hand holds the rod, stabilizes the line, the right hand grabs the medicine and puts it into the plate, lifts the button, looks at the star, and the left hand moves the line on the rod to the index position to be weighed and then releases, when the index of the star and the rod are balanced, that is, the weight of the drug.

Notes:When using the scale, first check whether the number of the plate and the scale match; Then check whether the stone is balanced on the fixing star, how sensitive it is, if it is balanced and sensitive, it can be used, otherwise it should be repaired and then used. The scale should not be too far or too close, too high or too low.

If the weighing is less than 1g, it is necessary to choose a centimeter. The principle of making and using the centimeter is the same as that of the scale, its size is smaller than the scale, the rod is about 30cm long, and it is mostly made of animal bones or metal. Its weighing range is between 200mg and 50g, and it is mainly used for the preparation of fine materials, precious and toxic drug prescriptions.

After the scale is used, the plate should be wiped clean, and the plate should be placed in the plate and hung in the appropriate position to prevent moisture and rust, so as not to affect the accuracy. It should be kept in a wooden box.

Component composition. 戥子, a measuring utensil, popular in the Qing Dynasty, mainly used to weigh some valuable **, **, jewelry, Chinese herbal medicine, etc., with grams as the unit of measurement, small weighing pan, thallium for the yellow quietly file copper or white copper. The weighing rod has bone, ivory, horn, ebony, etc., and the best is the ivory rod, which is also of high value.

The pole is the key component of the pole, which is made of heavy and tough ivory, pure black ebony with iron and solid quality, bronze cast by Seiko, and animal bone as white as jade. The plate is a vessel for placing and weighing items, which is generally made of bronze casting, and some are stamped from copper plates. The hammer, also known as the thallium scale, is also cast in bronze.

There are many kinds of shapes of hammers, including cylinders of moderate height, oval shapes of decent thickness, circles like coins, and combinations of inlaid gold and silver ornaments. In order to expand the weighing range, some hammers are equipped with two hammers of different sizes.

Here's how:

2. We only need to press this small button with the tip of our fingers, and we can change the current unit display when we hear a click.

3. As shown in the figure below, we converted the unit kilogram on the electronic scale into the unit catty two. In the same way, we can do the conversion from two catties to kilograms.

The method of adjusting the electronic scale to kilograms is as follows:

1. Turn the electronic scale over, and at the back of the electronic scale, there is a small dot of different colors, which is the button to change the settings.

2. You only need to press this small button with the tip of your finger to hear a hail to change the current unit display. Source beard ruler.

3. Convert the unit kilogram on the electronic scale into the unit catty two. In the same way, the conversion from catties to kilograms can be carried out.

The method of changing the kilogram of the electronic scale for the pound of the city:

We first have to confirm whether the electronic scale has the unit function of transferring kilograms to pounds, which can be seen in the manual of the electronic scale. If the manual does not mention that there is a function of converting kilograms to city catties, then this scale cannot convert kilograms to city catties. If you have this function, then it is very simple, just press the function conversion button to change the display unit on the electronic scale from kilograms to pounds.

Generally, the electronic scale that needs to be transferred from kilograms to pounds is a pricing scale. Industrial weighing electronic scales or counting electronic scales do not have the function of transferring kilograms to pounds. <>

1. How to use:

When using a mechanical scale, place the object as gently as possible on the load-bearing capacity, and do not slam the place. And remove the parts after each use to avoid damage to the blade.

For example, when the mechanical scale is used continuously, after a certain number of times, whether the empty scale is balanced to ensure the accuracy of measurement.

In the process of using mechanical scales, in addition to calibrating the empty scale, nothing can be hung on the scale, otherwise the accuracy of the scale measurement will be affected.

In order to avoid damage to the body of the mechanical scale, attention must be paid to measuring the maximum weight of the object, which does not exceed the weighing value of the mechanical scale.

2. Precautions before use:

When using, first put the inside and outside of the mechanical scale on a flat and hard ground after packaging, and the four wheels hit the ground at the same time to prevent.

The adult body is tilted, which affects the measurement.

When using the scale, the load-bearing plate should be shaken, and the knife and knife should be well undertaken, and at the same time check whether the metering lever is deformed, and then hang the weight and metering lever force point ring (thallium moving to the "d" position), if it is unbalanced, rotate the adjustment screw, and the empty scale is balanced to achieve balance.

1. First of all, confirm that the scale is accurate.

Before the scale is used, you have to move the scale with the scale on the rod to the 0 scale, that is, the empty scale, the scale should be in the zero position, and the ruler should swing up and down in the calibrator (cast iron frame) and stop in the middle position to indicate that the scale is accurate. 2. If it is not accurate, it must be adjusted. If you see that the scale is facing up, you have to adjust the knob in the frame on the right side of the scale and twist it back until you see that the scale is swinging up and down.

If you see that the scale is facing down, you have to adjust the knob in the frame on the right side of the scale, twist it forward to adjust, until you see that the scale rod is swinging up and down. 3. Next, look at the scale.

There are a total of 100 straight lines on the scale (including 10 long straight lines, 90 short straight lines), each short straight line is a city jin (that is, 1 tael), each long straight line is 1 city jin, the last long straight line on the scale is 10 city jin, and the scale is not added to the weight, the maximum can be weighed to 10 city jin. 4. The specifications of the straight lines on the scale scale are as follows:

1 tael, 2 taels, 3 taels, 4 taels, 5 taels, 6 taels, 7 taels, 8 taels, 9 taels, 1 jin jin, 1 jin one, 1 jin two, 1 jin three, 1 jin four, 1 jin five, 1 jin six, 1 jin seven, 1 jin eight, 1 jin nine, 2 city jin. The latter straight line is always 1 tael more than the previous straight line, and so on, until 10 catties. 5. Then, see the weight of the scale, that is, the scale.

There are five pounds of different sizes on the scale of 200 city catties, a total of 190 city catties, plus 10 city catties of the scale on the scale, a total of 200 city catties. 6. Next, take a reading. There is a free scale on the scale that can move forward or backward, when the weighed item does not exceed 10 pounds, the scale moves to which grid, and the ruler of the scale is swinging up and down, which means that the weight of the item in that grid has been weighed out, and it can be read.

When the weighed item has exceeded 10 pounds, it has to be weighed little by little until the ruler of the scale swings up and down. To sum it up:

Confirm that the scale is accurate, and adjust it if it is not accurate.

Next, look at the scale.

See the weight readings on the scale.