What are the basic features that the TL R402 router has

This route is still relatively good! See what you do! I've used a function that can only be said from memory, and he supports 3 ways in terms of connecting ADSL, usually the routing is 3 kinds of fixed IP dynamic IP dialing.

This one is generally no different from others. LAN can also have DHCP is very convenient to use, I think his most special thing is that his firewall has one more MAC filter than DLINK and other routes, this is very simple to use, I don't want anyone to go online, just block it MAC! I think home, student dormitory use is more recommended, if you bring more computers, it is not recommended because of the limited routing function, but also want to bring up to 200 or so, probably in these cases, it is hard enough to pull not to add a few points?

TP Linktl R406 is a wired router with no wireless function and no antenna.

TP LinkTL R406 supports optical fiber, but if it is not directly connected to the network cable, it needs an optical distribution modem.

The parameters of the TL R406 are configured as follows:

Port structure: non-modular; WAN interface: 1;

LAN interfaces: 4; Transmission rate: 10 100mbps;

Network management: remote web management of system security logs;

Network standards: IEEE802 3, IEEE802 3U, IEEE;

Status indicator: LAN port, WAN port, system; Product size: 150 100 28mm;

Environmental standard: operating temperature: 0 40.

First, it is not a wireless router, it is a wired router.

The parameters of TL-R406 are as follows:

<>2. Tools required: TL-R406

Configuration method: <>

2. Click the start button and follow the prompts to connect the router and the computer.

One end of the network cable is connected to the WAN port of the router and the other end is connected to the LAN port of the modem.

Then connect the LAN port and computer network port of the router at both ends of the network cable.

3. Click Next to connect the router to the Internet.

4. Click Next to connect the power supply.

5. Click Next to check whether the indicator status is normal.

6. Click Next, and the management software will help the user detect the connection of the router.

<>8. Select PPPoE and click Next.

9. Enter the broadband account and password, and click Next.

The ISP (network operator) may bind the MAC address of the computer's network card, and the router WAN port uses the default MAC

The address may not be able to connect to the network, so it is recommended to clone the MAC address.

11. Click Next to control the IP bandwidth in the figure.

Total uplink bandwidth: the upload rate provided by the router through the WAN port.

12. After completing the above configuration, click Next, and the management software will configure the router.

13. After the configuration is completed, a diagram will appear to prompt the user's broadband router to be set up successfully, click Next.

14. At this time, the user's router has been configured and connected to the Internet, click Finish to exit the wizard.

No, it's just a regular wired router with no wifi

This is not a wireless route, it is a broadband route, not to mention that there is not even an antenna, it is generally not.

The TL-R402 router is a 100Mbps (megabyte) router. This router is a wired router produced by TP-Link company, and its corresponding data transmission rate.

It's 10 100mbps.

The TL-R402 router contains 1 number of WAN ports (with the number of LAN ports on the line. Its external power adapter.

Output: 9V 50Hz, the external dimensions are 150 x 100 x 28mm.

Other parameters of the TL-R402 router:

1. Transmission standard: LAN port: 4 x 10 100M adaptive RJ45 ports (Auto MDI MDIX) WAN port: 1 x 10 100M adaptive RJ45 port (Auto MDI MDIX).

2. Network protocol.

ieee 。Round.

3. Features: Network medium: 10base-t:

Cat 3 or above UTP 100BASE-TX: Cat 5 UTP LED indicates: Port:

LAN (1 4), WAN Others: M1, M2 (System Status Indicator).

4. Product packing list: Router x1 Power supply x1 Warranty card x1 Description orange shirt orange book x1.

The above content refers to Bailuo Haoke-tp-linktl-r402

TL-R406 Router: No wireless capability.

Router parameter list:

You see if your cat is wireless, directly apply for telecom 4m broadband, many places have wireless functions, it may be that your cat has wireless functions, but the cats sent by telecom are generally limited to the routing function, see if your friend cracked the cat, if it is cracked, you can connect the mobile phone with wifi function.

What is clear is that there is no wireless function. As for your friend's arrival with wifi, then is it that your friend bought a wireless router by himself, and he went back to his hometown and took it away, so you don't have wifi.

This is not a wireless router.

1.Router connection;

The network cable from the cat is connected to the router WAN port, and the two computers are connected to the LAN port (or port), and the corresponding light should be on or flashing;

2.Router Settings:

Enter in the IE address bar, the username and password are admin, click the setup wizard after entering, select PPPoe, and set the broadband account password;

3.Electron settings:

Set the IP of one computer to be the other one, and so on, the subnet mask is all the same, the gateway is the gateway is, and the DNS is also filled.

Connectivity issues are not detailed on the premise that the Local Connected status is connected.

Open IE and enter the account password to be admin

Then find the account password, enter the account password you dialed, and restart the land tour