Alarm after powering on! Seek help!!! 20

It should be caused by poor contact.

Check if the memory module graphics card is plugged in.

Unplug it and plug it back in.

If that doesn't work, try a different motherboard.

According to what you said, there should be a problem with your keyboard, you first dial the keyboard, and then listen to whether there is a short tone, if not, it is a keyboard problem, and you may have to change to a new keyboard!

The continuous long tone should be the reason for the memory, replug it, pay attention to whether the gold finger of the memory is oxidized, and whether there is dust, if not, you have to change a memory!

There are several possibilities:

1. Memory problems, the most likely, plug it in again, and clean up your love machine frequently, in order to ensure that he serves you well.

2. The problem with the motherboard battery may be out of power, I don't know how long your machine has been used, if it has been for a long time, you may have to change the battery.

3. If there is a problem with the power cord, check all the power cords and plug them back in.

Uninterrupted long sound: The system detects a problem with the memory module, reinstall the memory module or replace it with a new one, and try again.

Please refer to the "Complete Guide to Diagnosis and Treatment of Computer Failure Won't Turn On".

Unplug the graphics card and wipe the gold finger off it with an eraser. Then plug it in and try it.

It's not a memory issue! If it's a memory problem, you can't turn it on!

This is clearly a picture that is not in place, and I suggest that all the boards be reinstalled

I think it's due to poor contact, and I'd suggest reconnecting the interfaces. My computer used to be like you said, but then I reconnected all the interfaces and there were no problems. Try it if you don't want to.

It should be a memory problem, let's take a look at another memory.

If it's not going to work, I think that's a problem with the hosts.

Reinstall the memory module or replace it with a new one caused by poor memory contact to resolve the problem.

Take a look at your memory and network card, unplug it and plug it in.

1. Turn on the SMS function on your phone.

2. Enter the SMS and click the compose button to create a new SMS.

3. The receiver enters the last three digits of the number 12110 + local ** area code, such as the Tangshan ** area code is 0315, then enter the number 12110315 in the receiver. It's dry.

4. Like the first-tier city area code, such as Beijing 010, Shanghai 021, etc., then you can directly enter the 12110010 and 1211021.

a:ami bios

1 short beep: Memory refresh failed.

2 short beeps: Memory ECC verification error.

3 short beeps: The self-test of the system basic memory (the first 64KB capacity) fails.

4 short beeps: The system clock is wrong.

5 short beeps: CPU error.

6 short beeps: Keyboard controller error.

7 short beeps: The real mode of the system is wrong and cannot enter the protection mode.

8 short beeps: Displays a memory error (e.g. displays memory corruption).

9 short beeps: Motherboard FlashROM or EPROM verification error (e.g. BIOS corrupted by CIH virus).

1 long and 3 short beeps: memory error (e.g. memory chip corruption).

1. Long and 8 short beeps: The display system is tested incorrectly (such as poor contact of the display data cable or graphics card).

award bios

1 short beep: The system starts normally.

2 short beeps: General error. You should go to CMOSTathe and reset the incorrect options.

1 long beep 1 short beep: There is an error in the memory or motherboard.

1 long beep 2 short beep: Wrong monitor or graphics card.

1 long beep and 3 short beeps: The keyboard controller is wrong.

1 long beep 9 short beeps: motherboard flashram or EPROM error (e.g. BIOS corrupted by CIH).

Non-stop long beep: The memory is not plugged in properly or the chip is damaged.

Non-stop ringing: The display is not connected to the graphics card.

Repeating a short "beep": The power supply is faulty.

No beep sound and no display: The motherboard power supply is not connected, or the power supply is damaged.

Keep in mind that the above alarm sounds will be very useful to you!

Is it Master Lu who alarmed the possibility that the temperature is too high!

What is the sound of the alarm and is there any dialog box popping up!

What kind of scream, let's be clear.

You say that you have to call the police, generally not from the motherboard or BIOS alarm, generally can enter the desktop, he will not call the police.

It is very possible that you are operating too fast, because the computer does not react, and there are too many start-up items, and the alarm is issued.

If it is a heat dissipation problem, he will directly shut down or power off for you. He won't call you when he gets to the table.

When you boot up to the desktop, you don't need to do anything, wait for a while to see if there is an alarm!

The problem of entering the desktop memory is a little bigger, and the gold finger of the memory is wiped with an eraser.

Is it the sound of the horn, or the sound of the host. This should be distinguished, the general horn is not a big problem, and you have already gone to the desktop, indicating that there is no hardware problem, it may be a software problem, or a virus alarm!

It seems to be a sign of poisoning.

Just click Close!