The Tenda 11N s wireless router limits the bandwidth of wireless devices

Let me explain to you, the first IP address of this broadband control refers to the range of the device you want to limit the speed of the Internet, such as a computer or mobile phone. Devices that don't want to limit the speed can no longer be within this range. The second item is the direction of the speed limit, whether you want to restrict the device from uploading data, **data, or both.

The configuration of Tengda wireless router is simple, but for users who do not have a network foundation, it is still difficult to complete the installation of the router and the setting of limiting the network speed.

How to limit the speed of the Tengda wireless router.

1. Enter in the browser: Press the Enter key Enter - > enter the password admin in the redirected page - click "OK" to log in to the setting interface of Tengda wireless router.

2. Click "Advanced Settings".

3. Click "Bandwidth Control" - set the "Upload" bandwidth range to dial 2M ADSL and distribute the network speed evenly between 2 people.

5. Click "System Tools" - Restart Router" to restart the router, and after the restart is completed, the set rate limit policy will take effect.

Note: 1. If you want to control the network speed of a computer alone, you only need to check the IP address of the other party, and link the IP and MAC address on the Tengda router to ensure that the other party has been using this IP address; Then in the "second step", replace the IP address with this tethered IP address, and the bandwidth setting range can be set according to our bandwidth comparison table.

2. If you don't want your computer to be limited in speed, you only need to configure your IP address as a static IP address, and it is outside the speed limit of the router; For example, if you set a limit on the router: the network speed of this range of IP addresses, then configure your IP address to it, then the network speed will not be limited.

In the port status connection, if you select the Internet access mode, it is automatically obtained.

Confirm that the router is not connected, the broadband cable is directly connected to the computer, and whether you need to dial up.

If you don't need to dial up to access the Internet, confirm whether there is an IP conflict, if there is a conflict, in the router settings interface, click Advanced Settings - LAN Port Settings, change the default to OK.

If you need to dial up to access the Internet, click on the computer desktop "Broadband Connection" to "delete" the "Broadband Username and Password", re-enter, and then click to connect, to see if you can connect, if you can't connect, you need to contact broadband, if you can connect, the router Internet access mode selects ADSL dial-up.

2.If the Internet access method is adsl dial-up, connect the broadband network cable (the network cable that can access the Internet) directly to the computer, and then click on the computer desktop "broadband connection" to "delete" the broadband username and password, re-enter, and then click to connect, to see if you can connect it, if the connection is not error**691 is the account password input error.

If you can connect, you can clone it.

When cloning, you need to take a network cable to connect the computer to any one of the router 1 2 3 interfaces, do not connect the wireless signal of the router ).

3.Restart your router --- clicking System Tools.

After restarting, go to the advanced settings again to check the connection status, and it shows "Connected", then you can surf the Internet.

2. You can manually set your own computer IP address.

Use the wireless settings "Wireless Connection" IP address, such as settings, etc.

The bandwidth is set as follows:

Wired setting is 3m, wireless setting is 1m.

Upload speed: 15 30kbyte

32~128kbyte

Enable ticking.

Add to list.

Upload speed: 30 60kbyte

96~384kbyte

Enable ticking.

Add to list.

Oh, this is simple, you let both of them connect to the Internet, and you can see their respective IPs in the router settings.

<>2. Open the browser and use the login address and user information to complete the login operation.

3. In the main management interface, you can use the Internet account and password provided by the network operator to quickly set up a wireless router to complete the Internet access operation. You only need to enter the "Broadband Username" and "Broadband Password", and click "OK" to complete the one-click Internet access operation.

4. Of course, for more detailed settings, you can click the "Advanced Settings" button to perform more step-by-step operations.

5. Set up DHCP service: You can set the way for other hosts to obtain IP addresses as needed. Enable DHCP to allow all hosts connected to the router to automatically obtain IP addresses within the specified range of the address pool.

To do this, you only need to check the "DHCP Service" item.

6. Change the password of the WiFi hotspot: In order to ensure the security of the wireless WiFi, you need to change the default password of the WiFi hotspot connection. Switch to the "Wireless Network" tab, click on the "Wireless Encryption" item, and then you can fix the "Wireless Password".

7. Implement the speed limiting function for specific IPs: In order to reasonably allocate Internet bandwidth, it is sometimes necessary to allocate different network speeds to different IP network segments. At this time, switch to the "Bandwidth Limiting" tab, click "Bandwidth Control", check the "Enable Bandwidth Control" item, and then enter the IP address range and bandwidth, and you can add the network speed limiting rule.

Network cable connection] 1, (there is an adsl modem cat) will ** line (the thinner line) to the cat's line port (relatively small port), the cat separates a network cable to connect to the router's WAN port (blue), and then find a short network cable, one end to the computer, one end to the router 1 2 3 4 any interface (yellow);

2. (No adsl modem modem) directly connect the network cable to the WAN port of the router, and then find a short network cable, one end to the computer, and the other end to the router 1 2 3 4 Any interface (yellow).

Log in to the router].

1. Open the IE browser, enter the default IP address of the router (and press Enter;

2. In the pop-up login window, enter the username: admin; Password: admin; Then click OK, if you have entered the username and password correctly, the browser will enter the main page of administrator mode;

Router Settings].

1. Choose the correct Internet access method to set up, there are three common Internet access methods: PPPOE, dynamic IP, and static IP (static IP is in the advanced settings);

2. ADSL dialing: Select "ADSL dialing" in the settings page, enter the broadband user name and password provided by the broadband operator (such as China Telecom, Unicom, etc.) in the "Broadband User Name" and "Broadband Password", and click "OK". Here we demonstrate the ADSL dial-up method used by the average home user.

3. Change the wireless password and wireless signal name.

Click "Wireless Settings" - "Wireless Security" to set the wireless password;

4. Click "Wireless Settings" - "Wireless Basic Settings" in the settings interface to modify the wireless signal name;

5. Click "Advanced Settings" - "Running Status", if the WAN port status shows "Connected", you can browse the web and surf the Internet.

Tips: After accessing the Internet normally through the router, you don't need to click "Broadband Connection" again, you can go directly to the Internet when you turn on the computer; If there are other computers that need to access the Internet, connect the computer directly to any free port on router 1234.

1. Confirm that your line connection is correct

There is an ADSL cat, the cat is connected to the WAN port of the router, and the LAN port of the router is connected to the computer;

No cat (network cable directly into the home), broadband cable to the WAN port of the router, LAN port of the router to connect to the computer.

2. Whether the indicator light of the router is on normally

After powering on, under normal circumstances, the SYS light of the router flashes, and the indicators of the WAN port and the port connected to the computer are always on or flashing.

3. Reset the router

The router restores the factory settings: press and hold the reset button on the back of the router for 5 10 seconds until the router's sys light goes off or stays on and does not flash, so that the reset is successful.

4. Make sure that the network cable that connects the router to your computer is a good network cable.

You can change a network cable to see if the local connection of the computer can get the IP address of the router.

Possible reasons why the wireless router is restricted and cannot connect to the network and how to solve it:

Loose mouth wire. Solution: Reconnect the WAN port network cable of the wireless router.

2.The higher-level network device is abnormal.

Solution: Reset or replace the higher-level network device.

3.Dialing exception.

Solution: Check whether the password of the dial-up account is correct, and modify it if it is incorrect.

Solution: Consult the network provider to remotely monitor whether the line is normal.

5.Broadband account expiration or arrears.

Solution: Go to the network provider's office to postpone the payment.

The wireless router needs to be set up according to the Internet environment.

Different Internet environments have different ways to set up wireless routers.

If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.