How to set the speed limit of Tengda W150D wireless router

The best way to do this is to have a dormitory rule that you can't ** things when you're around during the day. It is only after 12 o'clock in the evening, and when people start to disobey, they ask who is in ** one by one. Slowly they are all conscious...

1. Open the properties of the wireless network card and select the Support tab.

2. Click on the details.

You can view the actual address (MAC address) of the NIC

3. After logging in to the router, select the DHCP server, and add the MAC address of the local machine and the IP to be assigned to the local machine in the static address assignment (for example, ensure that the assigned IP is in the IP range set by your router (if the IP range assigned by your DHCP is, then your choice is better to be 100 or 199, which is easier to operate), as shown in the figure

Click Add New Entry to appear in the following image:

Once you've filled it out and saved it, you also want to select "Make All Entries Active" on the previous image

4. Enter IP bandwidth control.

Local connection right-click status, and then click support, you can see the IP address The specific setting method is as follows.

1. Enter the router settings interface, click "Advanced Settings" - "Wireless Settings" - "Connection Status" to view the number of wireless connections, which is the number of wireless devices connected to the router, as shown in the figure

2. Bisect broadband settings:

For example, my broadband network cable has a bandwidth of 4m, and I have 2 computers, and I want to divide it equally, and divide it to each computer for 2m of broadband:

Fill in the details as follows:

IP range: , upload speed can be filled in 30 64kbyte, enabled, and then added to the list;

IP Range:,

How to set wifi speed limits on Tengda wireless routers:

1.The system is connected to a WiFi network.

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

2.Go to the DHCP client page and view the host name. Record the IP address of the device for which the speed of the device needs to be throttled.

3.Enter the bandwidth control setting interface in the router advanced, enter the range of the IP address corresponding to the device that needs to limit the network speed, set the bandwidth limit, and click Enable.

Tengda road router settings are still quite simple,After the connection is completed,Insert the Tengda installation CD,If the disc is lost, you can enter it in the browser address bar,Then enter the default username and password to enter the settings page,If you are adsl dial-up Internet access,Enter the broadband username and password in the page,Set the wireless network password,Then save it OK,If it is community broadband,Choose dynamic IP Internet access。

The router has 3 working modes, and different working modes correspond to different ways of surfing the Internet, and you can't mess around, specifically.

1) If you do not use the router when using the adsl Internet mode, there are cats, every time you go online, the computer should enter the user name and Internet password in the dial-up software, and then dial up the Internet, the wireless router should use the oppoe working mode, enter the relevant information, so that the router will automatically dial up the Internet after powering on, and the computer will not need to dial up the Internet after using the Internet mode, and it can be automatically connected to the Internet directly.

2) If you use community broadband Internet access when you are not using the router, there is no cat, after directly connecting to the Internet cable, you can turn on the computer and go to the Internet without dialing up, then the router should be set to dynamic IP working mode after connecting the router.

3) If the network operator gives you the IP address, gateway and other information when installing the network, then you have to set the working mode of the router to the static IP working mode, and then enter the information provided by the operator into the router to access the Internet.

Hello, I did the same at first, and then I changed the DNS. First go to the router settings and fill in your own DNS, and then go to "Local Connection-Properties-Double-click Internet Protocol-Use the following DNS" (fill in DNS), and that's it.

According to the manual, the computer is connected to the LAN port (that is, there are many ports, and those with the same color are any one), and the computer is set to automatically obtain the address. Log in and follow the Quick Wizard to set up.

That's the portable route, it's best to connect the router with the cat first, and then use the laptop to search for the router, and then set it up, you can check the working status of the router in the web page, and you can enter the log to see what the problem is.

In the interface of the router there is a wireless function that can be seen inside.

First of all, regarding the speed limiting problem, you can do bandwidth control, you can refer to the following documentation.

The maximum speed of 2m width is 256kb, and if you give someone 1 4, that is 64kb. You configure an IP address on your computer, set the IP address to and enter 64KB in the QoS settings on the router management interface. That's it.

This only limits his speed, and you can even use the full bandwidth when he's not using it.

You just don't include your own IP, and the speed limits yourself depending on your requirements.

Log in, there are settings in it, find that IP, and set it.

Enter its management interface. The back of the router has its IP address and username and password. Open this IP in the address bar of your browser, and then enter your username and password to enter the admin interface.

In this case, the bandwidth line of the ADSL you are connected to is a few meters, let's say it is 2 meters. Enter the router interface, enter in the address bar of IE browser, and the username and password are: admin

Router Interface, Bandwidth Management, Enable, Start IP Fillin: Terminate IP Fill: Upload:

20kb/s。Downpass: 120kb s.

After filling in, add it before saving. The penultimate system tool on the left - restart the router, and after the reboot is complete, you can do it.

Mine is the same!! Porphyry routing is good!

Connect 2 units and you're stuck!

4m broadband also.

IP address 0 255

Speed limit direction down.

Broadband range 0 256