How do I overclock my cpu Intel Pentium 4 2 93G .

The steps are as follows: 1. Press a few times after booting or restarting del2, enter the full name of the blue screen and white characters, hehe, you should understand);

3. Find the one on the right side (usually the column on the right)."frequency/voltage control", click"enter"Enter;

4. General overclocking, only need to change"cpu frequency", 4200+ external frequency 200MHz, false multiplier is 11. If you want the main frequency of 2700MHz, then use 215 220 225 230 235 240 to try it one by one, and add some voltage appropriately while trying, until it is unstable and then drop it a little, so that it can be used normally; Frequency multiplier = 245, change to 245MHz (manual input).

5. After you are ready, don't forget to increase the fan speed, in BIOS -PC Health Status-Cpufan Mode Setting, select Manual Mode, change to 255 (0-255 level, the larger the speed);

6. Press F10, select Yes OK, auto-restart, auto-adjust and enter the system after stabilization.

Theoretically, yes, but it depends on whether your motherboard supports overclocking, and if you build your Intel CPU if you are not a DIY player, it is better not to overclock, because it is too easy to crash or blue screen if the heat is too large.

There are two types of CPU overclocking, one is super frequency multiplier, and the other is super external frequency, and there are certain differences between the two.

For example, a CPU with a main frequency of 1G means that the external frequency is 100M times 10 times 10 times. By the first method of over-doubling to the left and right, then its octave is 13Through the second method, the super-external frequency is super-frequent, then its out-of-frequency is 133m (the super-out-frequency is recommended to be super-standard out-of-line, that is:

100, 133, 166, etc., can also be ultra-non-standard external frequency, provided that your computer can withstand the situation, because the ultra-non-standard external frequency at the same time to the computer's PCI bus is also overclocked, PCI bus is based on the frequency division of the external frequency, such as 100M external frequency its PCI is always 33M that is, 1 3 divisions), the same CPU overclocking, the second method overclocking improves not only the frequency of the CPU, but also improves the bus frequency, Therefore, the second type of overclocking will improve the performance of the computer much more than the first.

In fact, there is a safer way to improve the performance of the whole computer, that is, to increase the external frequency and reduce the frequency doubling without changing the main frequency of the CPU. (Jianyi Standard External Frequency).

How much you can overcount depends on the quality and manufacturing process of the CPU, and I suggest that you don't overclock, or stability is the last word.

There is no point in overclocking this CPU.,The bus speed is low.,The board with only 2 hands.,The memory can go up to 512M.,The graphics card also uses a maximum of AGR4X.。 If you go online and talk about QQ, you don't need to overclock, you can use it. If you're playing a big 3D game, switch to a different device.

You can overclock, by setting the BIOS is to press the del button when booting up, there are settings about the CPU.

How to overclock depends on what model your motherboard is, and the specific settings have nothing to do with the CPU.

Under the software ultra! Hard super, don't overshoot, don't overshoot.