How to connect to wifi in DJI Maje, how to connect to wifi in DJI remote control with screen

Hello, the way to connect to WiFi is as follows: switch the aircraft control mode to Wi-Fi, turn on the aircraft, run DJI GO, click on the upper right corner of the device interface**, follow the prompts to scan the wifi*** on the arm to connect to the aircraft, click Auto Takeoff, touch the screen with your finger, and a virtual joystick will appear to control the flight. Is it wifi to connect the drone or remote control, wifi connection mobile phone traffic can have a network.

You can restart the wifi or try again on your phone.

Sometimes the wifi signal is obviously very strong, but when the Internet is disconnected, you have to reopen the settings and connect again, and then the connection is disconnected after a while. The signal is unstable, I can't open the web page, I always drop the line, and I cry in front of the computer every minute. Today, I will take you to see the reasons behind the total drop of wifi.

1. Signal interference.

Mobile phones, wireless**, microwave ovens, and electrical appliances with wifi modules are all strong sources of signal interference, and the wireless signals and strong magnetic fields emitted will seriously affect the transmission and reception of the router's wifi signal, and even the neighbor's router will interfere with the signal. So, turn off these devices, or install the router in a place with less interference.

2. Poor placement.

Many people feel that the router will affect the overall appearance of the room, and they like to put it behind the TV cabinet, or in a corner. No matter how strong the signal is, it will be weakened by a wall or obstacle. If it is a duplex or a three-bedroom or two-living room apartment, it is best to have the router in the center of the house, so that the high-quality wifi signal can cover every corner of the home.

3. Poor heat dissipation.

If the router works for a long time, it will overheat, age, and overdose, resulting in reduced signal coverage. You don't need much rest time, just set the router to automatically restart every day, and the router after a little rest can make your wifi faster and more stable!

4. The channel is congested.

When using a wireless router, the router usually has a default channel, which is perhaps the most congested of them. In addition, wireless routers are now installed in almost every household, and these routers can interfere with each other, causing channel congestion and poor signal quality. But in fact, there are many router channels, you only need to change the channel in the router settings, and switch your own wifi channel to a less congested channel.

1. Switch the aircraft control mode to Wi-Fi

2. Turn on the aircraft.

4. Click Auto Takeoff.

5. Touch the screen with your fingers, and a virtual joystick will appear to control the flight.

Hope it helps.

Summary. Connecting DJI's remote control with screen to wifi can be done by following these steps:1

First swipe the screen on the remote control, find the "Settings" option, and tap to enter. 2.In the settings interface, find the "Wi-Fi" option and tap to enter.

3.Find and tap "Scan for available Wi-Fi hotspots". 4.

Wait for a while, and a list of available Wi-Fi hotspots will appear on the screen, find the hotspot you want to connect to and tap to enter. 5.If the hotspot has a password, you'll need to enter it.

Click on the "Connect" button when the input is complete. 6.Wait for a while, and the connection will be successful on the remote control screen.

If you can't connect to WiFi successfully with the above steps, you can try to turn off and off both the remote control and the WiFi hotspot again. If that doesn't work, you may need to check if the WiFi hotspot is working or try using another connection method, such as a mobile hotspot.

Connecting DJI's remote control with screen to wifi can be done by following these steps:1First swipe the screen on the remote control, find the "Settings" option, and tap to enter.

2.In the settings interface, find the "Wi-Fi" option and tap to enter. 3.

Find and tap "Scan for available Wi-Fi hotspots". 4.Wait for a while, and a list of available Wi-Fi hotspots will appear on the screen, find the hotspot you want to connect to and click to enter.

5.If the hotspot has a password, you'll need to enter it. Click on the "Connect" button when the input is complete.

6.After a while, the remote control screen will show that the connection is successful. If you can't connect to WiFi successfully with the above steps, you can try to turn off and off both the remote control and the WiFi hotspot again.

If that doesn't work, you may need to check if the WiFi hotspot is working or try using another connection method, such as a mobile hotspot.

Can you add, I don't quite understand it.

The steps to connect the DJI remote control with screen to wifi are as follows:1Turn on the remote control and enter the main interface of the remote control.

2.Open the settings menu at the top of the remote control and find "Network Settings" in the drop-down menu. 3.

In the "Network Settings" interface, click the "WiFi Settings" button to enter the WiFi settings interface. 4.In the WiFi settings interface, click the "Scan WiFi" button to search for nearby WiFi hotspots.

5.Select the wifi hotspot you want to connect, enter the password, click "Connect" and press the state slag button. 6.

Wait for the remote control to connect to the wifi hotspot, after the connection is successful, the wifi icon will be displayed on the remote control screen. Once connected, you will be able to connect to the internet via the remote control and use various features and applications. If the connection fails, you can try to search for the wifi hotspot again and check if the password is correct.