Five computers how to use one router

If you buy enough for 8 people, you can use 5 computers, and you don't need to ask the boss, and the church will buy it. It's simple, just say it and you'll know. Satisfied.

Is it possible to use one router to surf the Internet at the same time? If yes, first you need to prepare a 5-port router, and then connect your cat to the WIN port of the router, at this time the router has 5 LAN ports left, you can connect the computer you want to access the Internet to the router with a standard 568B network cable. In the case of your router configuration, it is OK to automatically get the IP address when you turn it on directly.

If you don't know how to set up a router, it is recommended that you read the manual of the router with a very detailed configuration!

Buy an eight-port router, if someone can go wireless, buy a router with wireless function, if the ready-made is a four-port one, you can add a hub so that the four-port one becomes a seven-port one. The hub does not need to be set up to connect to the PC interface of the router, and then the computer can be connected to the hub.

First find out if the local communication service provider has blocked the IP (in some places, one IP per household is online, and one more is not good) If not, you can use an 8-port router to connect it.

The most economical and easiest way is to use an 8-port router. If you can afford it, it is recommended that you install a wireless router. It is not recommended to use a 4-port router plus hub.

Buy an eight-pin router, and if you already have a four-pin router, you can connect four computers, and then you can set up tethering with another one.

It is not recommended to buy a switch!! Buy an 8-port router, save trouble, just connect it directly.

There are no 5-port routers, only 4-port, 8-port, 16-port, and 24-port routers.

With a wireless router. Or add a switch.

Wireless routers are available. Or add a switch.

You can buy an 8-port router

BA just connect two of the computers in series or buy a long and empty router.

Buy an 8-port router or a 12-port switch.

Just buy a router with eight ports.

Set the IP address of 4 computers to be obtained automatically, and connect the router to 4 computers with 4 network cables. Enter the username and password for the router. OK.

Buy a switch, or buy a wireless router.

1.Each computer - switch - router.

2.Each computer - wireless router - wired router.

You've got to set it up.

There is a WAN port on the route.

Plug in a broadband cable.

The other 4 ports are plugged into the computer.

After connecting, enter it in the IE address bar.

The username and password are the same.

It's all admin

After entering. Select poppe what to fill in Unicom broadband password.

I feel like your instructions, it feels like you're dial-up to the Internet on both computers, right?

It should be your broadband coming in - the cat (if there is one) - and then connecting the WLAN interface (a colored port) on the router, and then connecting your three computers below.

Set up the router at the same time, save the account and password you dialed in, restart the route, and the computer can access the Internet without dialing.

Multiple computers are connected to the Internet using routers.

Equipment purchase: When buying a broadband router, tell the merchant what it is when you buy it"Telecommunications"Still"Netcom", equipment needs, eight-port router (the general electronic market is sold, four-mouth is about 80 yuan, eight-port I don't know).

Brands generally have"d_link"or"tp_link"

Connecting the step wheel rental book suddenly:

1. After buying, unplug the cable that was originally connected to the network card, and 2. Plug it into the broadband router you just bought"wan"On the mouth, 3, I am looking for a peer network cable with a crystal head, 4, one end is plugged into the network card of the computer, and one end is plugged into any port of the broadband router 1-4, so that it is connected.

5. Repeat 3-4 steps for the connection of the other unit.

Settings: 1. Turn on, the broadband router should also be connected to the power supply, 2. Please read the manual carefully, because the manual has the IP address of the router you want, and you also need to know the account and password of the router, so you must obtain the above three information from the manual before you can enter the router interface for setting.

3. Enter and press enter in the address bar of IE, and the username and password will appear as "admin 123456" respectively. Note: The address, account and password in the manual, because different types of bad brands of broadband routers are different.

4. IE pops up the setting interface of the router, select the setup wizard, there are three options in the next step, select "PPOE" Next, enter the Internet account and password of the existing "cat", next, save it.

How to set up Internet access with router sharing:

How to configure a wireless router and how to set it up:

Wireless router security settings and how to set passwords:

For a more detailed look, check out the Deerlinger House.

Once you have a router, you can easily share an ADSL Internet access for multiple computers

Connection order: ** line - cat - router - computer. Note:

The cat is connected to the WAN port, and the computer is connected to the LAN port, and there are generally multiple LAN ports on the router to connect to the computer. In this way, multiple computers can be connected to the Internet together. In fact, the functions of routing and switching are realized at the same time.

After entering, you don't have to worry about anything else, just set it in the WAN option: PPPoE dialing, enter your Internet access and password, and then connect, as long as you coordinate the connection, you will be connected. Save it at the end.

At this time, the router undertakes the task of dialing, and there is no need to build a dial on the computer.

Generally, the function of automatic IP assignment on the router is turned on, so the IP address of each of your computer network cards must also be set to be automatically obtained, and there can be no manually configured IP, note.

The connection between the cat and the router: the router used in the general family has five ports, that is, one WAN port and four LAN ports.

2.The connection method of the second to the fifth router: the first LAN port comes out and connects to the LAN port of the second router (the other can be connected to the computer).

III. Fourth, fifth, and so on, ok.

3.If it is used by many people, it is recommended to buy a switch.

The first one can be used as a router, and the rest can only be used as a hub.