Is it normal for a motorcycle Honda CBR6ooF5 to idle at 1500 rpm?

Motorcycle, Honda. This 1500 block also belongs to the normal speed. If you want a door, you can go even lower.

If you just take a taxi and play for a while it is still 1500 rpm, this speed is a bit high. You can adjust the oil carburetor piece. Turn the rpm slightly lower and turn the idle speed down a bit.

This Honda CBR 600 idle speed of 1500 rpm is normal, because this mode is 125, which is relatively fast, the speed is relatively fast, and the diamond thousand and a half can be reached.

If the motorcycle Honda idles at 1500 rpm, of course, it is not normal, and the idle speed is a bit too high.

Motorcycle Honda CBR6OOF5 idle speed of 1500 rpm is not normal, a little high, just adjust it. Hope.

Is it normal for a motorcycle Honda CBR 600F to idle 1500 rpm? This is normal, his normal idle speed is around 1500 rpm, and above 1600 rpm, it will upshift and downshift.

This is also normal, after all, as long as the sound is not particularly loud and the car is not particularly shaky, then obviously everything is not afraid.

There is no impact.

It is normal for a motorcycle to idle at 1500 rpm.

Because the size of the motorcycle's ability to speed and the power to rotate is different, this is also in the normal range.

Motorbike Honda, if its idle speed is 1500 loads, I think it is abnormal because this rev is too fast.

Motorcycle Honda F idle speed 1500 rpm, this is of course abnormal, you need to adjust the idle speed.

Motorcycle, Honda Aifu V algebra registration 1500 rpm normal. It's normal for this to belong.

The car Honda CBR 600F, the stage speed is relatively slow, and 150 rpm should be normal.

Motorcycle Honda idling 1500, normal operation, alas, just here ah!

This idle speed of 1,000 and a half on a motorcycle Honda is normal, I think it's quite normal.

Motorcycle Honda CB26 idle 1500 normal, this is a normal speed.

The Honda idle speed at 1500 rpm is a little high.

Motorcycle Honda CG 605F5 top speed 150 rpm, is it normal? It is very normal for 1500 diamonds.

Well, this idle speed and rpm are a bit too high, and they should be adjusted again.

This should be normal, depending on how you operate, and you can adjust it yourself.

This question mainly depends on what his standard is, and it is enough to focus on the standard.

This car, he I still have to eat fat traffic rules. Normal, that's pretty normal 1,500 is no problem?

Is the motorcycle Honda 1500 string normal? It feels okay, it doesn't feel abnormal.

If this Honda motorcycle wants to spin normally, then it should be in all aspects.

Not normal, the idle speed should be about 1500 rpm when the car is hot, the idle speed is based on the hot car as the standard, the cold car will naturally be lowered, and even no idling, this is a normal phenomenon, as long as the cold car starts when the gear is jujube and the throttle starts and preheats up, if the idle speed is adjusted to normal when the car is cold, it will be too high when the car is hot.

When the car is hot. A low idle speed indicates that the mixture is too thick and becomes high. When adjusting the idle speed, you may wish to adjust it according to the hot car time, which is more economical.

Because the normal working temperature of the engine is above 90 degrees, at this time, the lubrication is good, and the gasoline evaporates well, so the combustion is sufficient. But this is not the case when the car is cold, because the temperature is low, the gasoline entering the cylinder can not be completely gasified, and the ignition efficiency is very low at this time, so the engine computer must increase the amount of fuel injection and increase the concentration of mixed gas to ensure the normal operation of the engine. The engine revs high after starting, which can also be said to be for "hot cars".

Different motorcycles have different idling speeds. Like the common motorcycles in China now, the idle speed is generally about 1500 rpm, and the idle speed is based on the hot car as the standard, do not look at the idle speed when the car is cold.

Idle speed is not as long as the ignition is not turned off, the lower the better, the idle speed is too low sometimes although it does not turn off, but it may cause the cold car to start difficult and the warm-up time is long, etc., and when the idle speed is too low, the engine will rely more on the crankshaft inertia to maintain operation, and the noise and inertia of the engine will increase after a long time, and because the idle speed is too low, the oil pump oil supply is small, which is not conducive to the lubrication of the engine, and may increase the wear and tear of the engine.

Generally, the manual of the car will indicate what the idle speed is, and it can be adjusted according to that requirement.

The standard single-cylinder motorcycle idle speed is best within 1,300 rpm, the engine operation in this state is the most stable, it can be lower, it is best not to be high, this involves whether the matching of the engine is good, specifically refers to the intake combustion system, and there is a minimum stable speed problem, the better the idle speed, the better the minimum stable speed of the car,

Normal This is the design of almost all car models, all cars in winter after ignition starts idle speed of more than 1,000 rpm, after preheating as the water temperature rises, the speed gradually decreases to normal speed. If the hot car is still 1500 rpm, it is a bit high.

Yes, in the case of a hot car, the minimum idle speed is the number of revolutions of the car when the start switch is pressed, but it is not absolute, and it is related to the temperature of the air.

All cars have an idle speed of more than 1,000 rpm after the ignition is started in winter, and the speed gradually decreases to normal speed as the water temperature rises after preheating. During the period, do not step on the accelerator to refuel, do not turn on the heater, after the temperature rises, the thermostat turns on the large circulation state, and then turns on the heater and other large electrical equipment. Reduce the load on the engine and electrical equipment and prolong the service life.

It is recommended that the all-aluminum engine be heated in situ for 5-8 minutes after ignition, and then drive at low speed for a few minutes before driving normally. Cast iron engines take more than 10 minutes.

If you start after 5 minutes, it's still 1200, it's definitely not normal.

Normal driving, about 600-800 between stops is normal!

1500 is not normal in winter, normal is 1200 rpm. My Yuena winter cold day ignition 1500, and the hot car 10 minutes is still above 1000 rpm, special oil, spark plug burning finch black, warm a little morning ignition on 1200, I don't know what the problem is.

Kia K2 manual 600--800 or so is normal.

It should be a different license plate, its model is different, and its operation with a book is also different.

The idle speed of the car is not normal at 1500 rpm, it is a bit high, and the normal idle speed is generally 550-800 rpm.

Normally, almost all models are designed like this. In winter, after the ignition of the car is started, idle.

All of them are above 1,000 rpm, and the speed gradually decreases to normal speed as the water temperature rises after preheating. If it's still 1500 rpm after a hot car, it's a bit high.

There are 1 2 3 4 5 on the tachometer, 1 is 1000 rpm, 1500 is between 1 and 2, see for yourself.

There is an idle speed empty on the right side of the motorcycle, and now the motorcycle is started and then used a flat screwdriver to pull the idle screw, and the clockwise pull to increase the idle speed, and vice versa to reduce the idle speed

The general idle speed of motorcycles is maintained at about 1200-1500, and some cars can be around 1000.

Idle speed means that the engine runs under no load, and only needs to overcome the frictional resistance of its own internal parts, and does not output power to the outside world. The minimum speed at which an engine runs smoothly is called idle speed and is one of the five basic operating conditions of an engine. Engines with good working performance generally have an idle speed of 550-800 rpm.

1. If it is KPR150: the carburetor model has low idle speed of cold engine and high idle speed of hot engine, and too low idle speed will not affect the engine, but it will cause difficulty in starting, and it is recommended that the idle speed of hot engine be adjusted to about 1500 rpm.

2. If the KPR200: KPR200 is set to idle speed of 1300 50 rpm, the idle speed of the cold engine of the EFI model is high, the idle speed of the hot engine is low, and the idle speed of the hot car is returned to normal after starting.

The idle speed is generally adjusted when the car is hot, and it is generally adjusted around 1300 in winter, and it is appropriately adjusted in the summer, and the clutch is stuck when the car is cold, so the car will rush forward, as far as I know, many cars are like this.

The idle speed is at least about 1000 rpm to be normal. The idle speed is generally controlled at 900-1000, and it is easy to turn off the engine if it is low, and it is easy to waste oil if it is done. You first adjust the throttle clearance, and then adjust the mixing ratio.

The idle speed is low to consume fuel, at least about 1300 rpm is normal. The idle oil and gas should be thickened, otherwise it will be easy to stall. You first adjust the throttle clearance, and then adjust the mixing ratio.

The general idle speed is maintained at about 1200-1500, and some cars can be around 1000.

The idle speed of a car is not read in the manual.

The instruction manual just gives a reference.

Trust the mechanic's skills.

As long as the car that can be idle is stable, it's fine.