Why does my home s wireless always drop and wired is normal?

1. Other electrical equipment interference problems: whether there are such as: cordless **, microwave oven around the wireless modem; In addition, even electrical appliances such as air conditioners, washing machines, and refrigerators can cause electromagnetic interference.

2. Placement problem: the effective distance indoors is 30 meters, but due to environmental factors such as the house type, the furniture placement may not achieve the actual effect. Therefore, it is recommended that users place the router in the middle of the room, because the transmission range of the wireless device is a sphere, and in the middle of the room, the diameter of the signal range can cover the whole house to achieve a better transmission effect.

3. Channel conflict: With the popularization of wireless products in the home, the choice of channel is a factor that has to be considered. If there is a channel conflict, you can choose the most suitable one for you according to all the wireless channels in this area in the router's configuration interface.

Compared with wireless, wired transmission reduces the possibility of a lot of interference, so it is best to play games on a wired network, which will reduce the number of drops. If you can only use wireless, it is recommended to change the router or see if there is channel interference, and the other is to see if anyone is stealing your wifi, and multiple devices on the wireless network can also be connected to the Internet at the same time.

1. After a computer in the network is poisoned, frequent data packets cause network blockage, and other computer networks in the network will be intermittent.

2. Look at the router to see if there are any big electrical appliances next to the router, because this is also a signal that may trigger Wi-Fi.

3. The aging of the router or switch transformer leads to the unstable operation of the internal components of the router, and the router is getting better and better, and the quality is not as reliable as before.

4. And then there is a lot of software on the computer will occupy the network channel, sometimes I don't know if I don't pay attention to it, so I can close it.

Let's first use the ping command to test the packet loss of the network, ping -t

In the case of ensuring that the network cable and the incoming network signal are normal, you can try to do it like this.

The router is replaced with a transformer (this situation is more common), and there is another situation where the router clears the log information after a long time.

Clear the electrical equipment next to the router and give Wi-Fi an unobstructed signal path.

Get anti-virus software first, try to kill several computers in the network first, and rule out the cause of computer poisoning.

You can click the right button on the taskbar, click to start the task manager, and then click the service, the software you want to close the end of the run, really don't understand the computer manager to close, all Chinese is very well understood.

If you forget the username and password of your wireless router, you can only reset the router to factory settings by resetting it on hardware. The reset step takes the WR541G+ wireless router as an example: there is a round hole marked as reset on the router, which is the reset button.

When powered on, find a sharp object and press the reset button for 5 seconds, the SYS indicator flashes rapidly 3 times and then releases the reset button, and the reset is successful. 1. There are signal interference sources such as microwave ovens and cordless ** around the wireless signal, so it is recommended to stay away from or turn off these interference devices. 2. There may be duplicate network names within the receiving range of the wireless client, and it is recommended to modify the SSID number.

3. If there are multiple wireless signals nearby that are concentrated in one channel, such as 6 channels, it is recommended to modify the wireless signal channel to 1 or the searched wireless signal is very weak, it is recommended to be close to the wireless signal source and then test the use effect. 5. Some viruses will cause disconnection, it is recommended to connect only one computer under the wireless router for testing, and use anti-virus software to detect and kill computer viruses. 6. Hardware or driver problems.

It is recommended to update to the latest drivers for the wireless network card and to detect if the hardware is corrupted.

The wifi signal at home is not good and the connection is old, just a can, and the network speed is smooth and does not drop.

It should be a base station issue! When no one plays the ** occupy the base station, your network speed should be very fast, but when the base station you cover is on the Internet, the ** amount is also relatively large, and it is normal to drop the connection! Because now wireless devices have just come out!

Some of the questions are not perfect.

Since you can go up, it is often disconnected, and the problem of wireless network card and driver is eliminated. You don't connect the wireless router, use broadband dialing to see if there is a drop in the line, there is a drop in the line, it is caused by the instability of the line, if there is no drop in the line, it is a problem with the router. Try changing routes.

There are many reasons for this problem,First of all, you can update the wireless network card driver,Or use the machine to connect to other wireless networks to see if it is normal,First rule out the problem of your own wireless network card,Then look at the problem of wireless routing,You can initialize it,Or in the wireless settings to see if the network transmission mode is consistent with your own computer。 If necessary, change the route to see if there is a routing problem. This is the only way to rule it out.

Wi-Fi drops are usually a problem with your router or computer.

If your computer connection to the wireless router often drops, then there may be a problem with your computer's wireless network card driver. Trying to reinstall the wireless NIC driver may also be a problem with the router, it is recommended to try restarting the router.

Obviously there is a problem with the routing settings, so.