How to tune the guitar tuner to the shore part

The shore part is tuned by hand, and the tuner cannot be tuned.

Your tuner can be tuned half a degree lower than the standard or should be two degrees lower, this tuner can tune the tuning of the shore tune, the shore is generally the tuning method of dadgad and dad fad, and the standard tuning of the guitar is eadgbe, so the tuning of the shore is generally to lower the sixth string, the third string (low note when f), the second string and the first string, and the dadgad is to tune the 1st string two degrees lower, that is, use your tuner to press a button with a b mark first, Press once is half a degree lower than the standard tone, such as the six-string standard tone is E, now press the B key is the be tone or the D tone, press it again, it is lowered by half a degree, it becomes the D tone, my electronic tuner is like this, press the B key twice is to lower the second degree, press it is lower by half a degree, so you know how to tune it, so when you tune the dadgad this tuning, you first tune the guitar's first and 3rd strings to the standard tone, That is, the electronic tuner does not need to press the B button when it is tuned to the standard pitch, and the other and 1 are to press the B button twice to turn it down by two degrees, and it becomes 6 strings for D tones, 2 strings for A tones, and 1 string for D tones. When tuning the dad fad, the third string is one and a half degrees lower than the standard tone, so you only need to press the b button to tune the third string.

You are so talented!! Just tune the strings of the bass with your guitar tuner! There is no need to adjust the twelve grades.

The tuner is the equivalent of a measuring instrument, it only tells you what pitch it is listening to, and the lower octave it still tells you if it is e or b. It doesn't matter if it's a guitar or a bass!! Wouldn't it be nice to experience it yourself?

Hehe, I really don't understand what you said, I use an electric guitar effect to tune the bass, so it shows e, a, d, g, not 3, 6, 2, 5. As you said, you tune a string and then tune other strings, and then come back to listen to the string in front of you, it's not right, in my experience, even if there is a difference between before and after, that's because you have moved other strings after the fretboard force changes, so the strings have a reflection, but there will not be much change, if you can rule out the saddle of your string buttons is no problem, you can only say that your tuner has a problem or can not be used for bass, generally the kind of tuner clamped on the headstock to tune the bass is not good, at least not accurate, I suggest you buy a dedicated tuner.

The tuner tuning method for the guitar is as follows:

1. In the 12 equal temperament mode, turn on the tuner and clamp the external pickup clip to the headstock;

2. When tuning, the pitch pointing point should be displayed for the argument;

3. Synchronize the strings displayed by the tuner with the strings of the tuning;

4. Pluck the strings in turn, and observe the sale and dismantling of the display screen.

Guitar tuning, in amateur cases, can be taken from local materials, with electronic organs, harmonica, flutes and other instruments with fixed pitch calibration.

Normally, the string button is loose in the clockwise direction and tight in the counterclockwise direction, which is exactly the opposite direction of our usual button. However, there are also people who are used to different directions, so they cannot generalize about the direction. You can listen to it while tuning, first adjust a little bit in one direction (if you can't tune it, try to **, don't use too much force, in case it breaks), if the tone is raised, it is tight, and vice versa.

The standard tone of the 1st string of the guitar is the 3rd note of the C key, and the beginner tune, don't tune it very standardly, just adjust the 1st string to the 1st note of the C key (3 notes of A flat key), and then tune the 1st to 6th strings to the 375263 of A flat key. If the strings are loose, the fingers will not be strained, and the strings will not be loosened, and the learning progress will be faster.

Buy a tuner.

The standard tone ranges from coarse to fine EB

The GDAE sixth and first strings are exactly an octave.

Or overtones.

It's tedious though.

I don't understand. There is a fact that you can be sure that the sound of a string is accurate afterward.

The fifth fret of the six-string is the same as the five-string empty string, but the timbre is different, and the fifth fret of the five-string is the same as the four-string empty string.

The fifth fret of the four-string is the same as the three-string empty string.

Note that the fourth fret of the third string is the same as the second string empty string.

The fifth fret of the second string is the same as the first empty string.

Ask me if there is anything I don't understand.

The tighter it is, the higher the sound, try it yourself. Here's how:

As long as you think it's good.

The note of the 5th fret of the second string is the same as that of the first string.

The note of the fourth fret of the third string is the same as that of the second string.

The note of the fifth fret of the fourth string is the same as that of the third string.

The note of the fifth fret of the fifth string is the same as that of the fourth string.

The note of the fifth fret of the six-string is the same as that of the five-string.

It is recommended that you buy a tuner, about 40 50 yuan, and the tone of manual tuning is not very accurate.

with computer software. I have one. Do you want it?

Several ways to tune guitars:

First, the best way is to use a guitar tuning flute. How to use: Play the e-note of the tuning flute, and tune the first string so that the pitch of its open string is the same as the e-pitch of the tuning flute.

Then blow the B note and tune the second string so that the pitch of the free string is the same as the B note of the tuning flute. The remaining four notes can be used in the same way.

2. Use the A note (6) of the tuning fork or harmonica or piano to align the fifth empty string of the guitar or the fifth A note of the first vertical spike string. Then use this string as the standard tone to align the other strings. Order.

The open string note is the base tone. Adjust the section.

The string pitch makes the first.

Strings. Fret pitch and first.

The strings are empty and the strings are the same pitch. Adjust the section.

The string pitch makes the first.

Strings. Fret pitch and first.

The strings are empty and the strings are the same pitch. Move.

To adjust the standard tone of the piano, look at the strings. Press the second string 5 fret, play the second side of the Qiao collapsed string + one string, see if the two tones are the same, and then press the third round string 4 fret, playing the third string + four strings. All the same, continue.

2nd string 5 frets. After playing, the same as the third string, the wide calendar presses the first string 5 frets, and the sound is the same as the second string. It's done, and it's not the same as the high and low pitch tightness.

Friend, in fact, hold down the pitch of the three-string four-fret to the two-string empty string...It's not to block Mu An's three strings and weigh the first three products! It's a four-fret pair of two-string empty sounds! Yes, 491090318, I will try to solve the problem for you.