What should I do if the self built house in the village is always wet? What can be prevented?

The house is always damp, the possible reason is that the foundation of the house is too low, causing the foundation to accumulate water, and then the moisture may slowly rise, causing the house to be damp; In daily life, we should pay attention to opening windows for ventilation and separating the dry and wet areas of the home, which should effectively solve this problem.

The foundation can be laid a little higher, the building materials can be added with a waterproof layer, and when building a house, try to choose when the weather is fine, avoid cloudy days, and when it is too cold in winter.

Dehumidify with charcoal. Charcoal is available in the market.

Dehumidify with lime. Put it in a bag and place it in the corner of the room.

Dehumidify with an air conditioner.

Apply waterproof paint or waterproofing agent.

Brush twice, the first time deep into the pores, and then the second time after drying, to form an overall waterproof coating film.

For the dampness of the house in the countryside, then it is better to open the window and open the door often with poor lighting or ventilation, or to open the window more widely, with good lighting, which can solve the dampness.

The solution to the dampness of the house in the countryside is to first raise the volume of the house when building the house, and then suspend the house in the air, so as to solve the problem of dampness in the house.

First of all, the indoor soil layer is flattened and compacted in place, and then a thick layer of polyethylene film moisture-proof layer is laid on top of the soil layer, if conditions permit, it is better to lay a layer of linoleum on the plastic film layer. Then pour 10 cm thick C15 concrete on the sealed film layer to make the base layer. Finally, the indoor ground layer is made on the concrete base layer, and after such treatment, the moisture in the indoor underground soil layer is basically isolated.

If the rural house is damp, there is no good solution, which is to maintain the temperature in the house, only in this way can the dampness be solved, and more ventilation is usually provided.

Of course, the dampness of the house in the countryside can be solved, dig a ditch in front of the house and behind the house, so that your house will not be so damp.

Rural houses are damp, the terrain is low, and the moisture is high, so the solution is to fill in the soil and raise it, and at the same time to open the doors and windows frequently for ventilation.

The reason why the house in the countryside is damp may be because of the relatively low terrain, and there is no good way to do this, but to add a layer of cement to the house, ventilate it more in summer, or change the house.

What is the solution to the dampness of a rural house? It is normal to prevent dampness, whether it is in the countryside or elsewhere, he will feel damp in a certain season, if it is a rural house damp, you can do everything you can to strengthen the thickness of the wall or how to deal with it.

Charcoal dehumidification is also a very effective dehumidification method, and there are many dehumidification boxes for sale now, most of which are carbon, which is a good dehumidification method.

If the house in the countryside is too wet, there are still many solutions, you can put that kind of dehumidifying thing in the corner. Nowadays, there are a lot of dehumidifying gadgets sold online.

The terrain is low, you can dig a deep drainage ditch behind the house, and there should be all around? Then pave the cement surface, leave a mud digging outlet, prevent blockage, and often wash the mud residue.

Rural house, what is the solution of the supermarket? It is to increase the decoration in it, and the best way to close it in the future is to use the sun to irradiate the sunny side, and they are not mainly to reduce the humid environment on the shade side, so you can only cover the time.

If the rural house is damp and the money is to be completely solved, does this need to be dealt with from the ground foundation? Hit the triple soil, which will be a good way to get rid of these.

When the rural house is more damp, you can do some moisture-proof treatment, or buy a dehumidifier at home.

If the rural house is damp, you can buy a dehumidifier, which has a drying effect for the humid environment.

1. Water-based paint is made of water as a solvent, its aqueous solution has a film-forming substance after brushing, and its coating can be well attached to the surface of the wall to form a protective film, which is insoluble in water, and has strong water resistance, and has a very good moisture-proof effect. We use it to paint the interior wall, which will make the surface of the wall have a protective layer, so as to achieve the effect of moisture-proof.

2. We can choose some tiles with moisture-proof effect, which have a very low water absorption, thick glaze layer, and high density of tile holes. Use it to pave the wall, it also has a good moisture-proof effect.

3. The natural environmental protection wallpaper and textile wallpaper in the wallpaper have very good air permeability and mildew resistance. We can choose one of the wallpapers to post on the wall, which not only plays the role of moisture-proof and mildew-proof tablets, but also beautifies the environment. Because it is an environmentally friendly wallpaper, it will not harm the human body.

4. Moisture-proof board is a good moisture-proof material, because it has a moisture-proof layer on the surface, which can isolate moisture in the air, and the effect is very significant. Therefore, using moisture-proof boards to make moisture-proof treatment on the wall can protect the wall from moisture.

When the self-built house is damp, the ground is always wet, and there is water coming out of the concrete floor. The floor tiles are slippery. There are a few ways to improve it.

If you are building, it is better to deal with it, that is, the foundation is dug down twenty or thirty centimeters to make an overhead, but the ground beam is above the ground, so it is easy to make a vent. Or directly raise the ground on the first floor, forty or fifty centimeters higher than the outside. When the foundation is built, remember to set up a small opening every one or two meters around, 50*50 or 100**100, or irregular, mainly ventilation under the ground, and the vent is covered with steel wire mesh.

lest it become a den of snakes and rats. After the foundation is laid, the waterproof membrane will be laid after the ground beam is laid, which can interrupt the passage of water vapor through the wall to the wall. After the coil is finished, a layer of cement mortar is smeared, and a layer of floor slab is covered, which is a prefabricated slab, and a layer of fine stone concrete should be played on top of the prefabricated slab.

So that the first floor of the house will not be damp.

If it has been built, the ground can also be waterproofed, if the ground is tiled, either the tile and the lime sand layer are frustrated, or directly on the tile waterproofing, but you have to change the door, because the ground is high. To do waterproofing on the tile, first apply the interface agent on the tile to increase the grip and roughness. Then the lime sand layer on the wall is also frustrated down to the meter.

Then cement mortar plastered the walls. Then the floor is covered with membrane, and the walls are brushed with waterproof paste. If you think it is so troublesome, make polypropylene cloth waterproof on the ground and wall.

After the polypropylene cloth is finished, if the wall is pasted with porcelain tiles. Spread cement mortar on the polypropylene cloth before tiling. If you just scrape the melamine paint, you can scrape the putty directly.

The floor can also be paved directly with floor tiles. Or make cement mortar for the ground. After this treatment, it generally does not get wet.

Underground moisture, generally on the first floor of the house, or in the basement, if this is the case, need to solve the problem of ground moisture and wall moisture, now the most effective way is to use a special ground moisture liquid spray two, you can completely solve the problem. What needs to be noted here is the difference between waterproof and moisture-proof, waterproof is liquid water, moisture-proof is moisture-proof, and the waterproof layer cannot isolate moisture from entering.

The moisture content of the outdoor air is high, so it is necessary to pay attention to the ventilation of the windows during the rainy season. Windows on the windward side should not be left open for a long time. Only a short period of ventilation can be done.

Put some desiccant products in the appropriate place in the room. The dehumidification function of the air conditioner can be turned on intermittently. If possible, you can also turn on the dehumidifier.

The first floor of the self-built house is damp, this situation is still a lot, in different seasons, the moisture of the ground will go up, after a long time, there will be dampness indoors, although the foundation of the first floor of the self-built house is very high, it still can't prevent the return of moisture, the first floor of the self-built house is decorated, and the moisture-proof treatment can be done, the questioner asked: the first floor of the self-built house is very humid, what are the good moisture-proof measures? The following is a detailed analysis and answer.

Waterproof powder oneOn the first floor of the self-built house, when building the house, in the cement mortar, the two materials should be added in proportion to the common sense, which is the waterproof powder used for moisture-proof treatment, we may not know much about the waterproof powder, the waterproof powder is packaged, each bag weighs 20 kg, and is a dry powder material, mainly used for moisture-proof treatment on the wall and the ground, and it is essential to add waterproof materials in the construction of rural self-built houses.

Moisture-proof powder twoSelf-built first floor, the main structure can not add waterproof powder, the main structure is covered, the wall, the ground has a smoothing process, outdoor wall and indoor wall, in the trowel process, cement mortar, add an appropriate amount of waterproof powder, stir evenly to smooth the wall, the ground, so that there will be no moisture indoors, waterproof powder is mainly moisture-proof, waterproof, used in humid environments, such as not doing moisture-proof treatment, fine decoration before doing it.

Do waterproof threeThe decoration of the first floor of the self-built house, like the construction of other floors is not good, all the space to do moisture-proof, waterproof treatment, is to make waterproof coatings for different spaces, such as cement mortar wall, the ground is not very flat, with the ground leveling mortar to re-smooth, a thin layer can be smeared, so that not only save waterproof coating, but also can achieve the ideal moisture-proof effect, different spaces to install wooden floors, will not be moldy because of moisture.

Do waterproof four,First do the wall waterproof coating, and to do one meter high, the underground moisture back to the interior, the wall will not appear damp, after the wall waterproofing, all the space ground waterproof, do waterproof coating is more complicated, especially the wall, ground joints, waterproof coating must be done carefully, the key parts of the waterproof do, after the first floor of the self-built house is finely decorated, there will be no dampness, which is the reason why the first floor of the self-built house needs to be waterproof.

At the same time, we should close our doors and windows to prevent the invasion of moisture, and we can buy a dehumidifier or heater for dehumidification, and we can also turn on the dehumidification mode of the air conditioner.

Make waterproof paint on the ground, set up some overhead layers, buy a dehumidifier at home, put some activated carbon, and put some desiccant can effectively prevent moisture.

If the first floor of the self-built house is very wet, it is necessary to do the waterproof and moisture-proof treatment of the first floor, and if the conditions at home allow, the ground on the first floor can be covered with a layer of waterproof materials when decorating. Or lay a moisture-proof layer under the ground, you can also lay a layer of insulation board on the ground, and a layer of moisture-proof film can also be laid under the insulation board.

It is possible to install a ventilation system inside the ground floor, such as natural ventilation pipes. You can also put moisture-proof floor tiles or floors on the first floor, and place some moisture-proof items in the house.

A sun fan can be placed inside. Or open a window and let the sun shine in. Usually clean more.

When dealing with the floor to protect it from moisture, it is usually sprayed with a waterproofing agent or painted with a waterproof coating. Here it is necessary to pay attention to the base layer to be completely cleaned before construction, and there can be no impurities, otherwise it will affect the subsequent construction effect. After the moisture-proof treatment, a new surface layer should be made.

Related knowledge popularization: 1. The ground moisture of rural self-built houses caused by weather factors is heavy. The weather causes the return of moisture on the ground of self-built houses in rural areas mostly in the rural areas of southern China, mainly because there is more precipitation and high temperatures.

In this case, when the more humid air encounters the cooler ground, it will condense into water on its surface, making the ground of the rural self-built houses damp. 2. The ground moisture of rural self-built houses caused by land factors is heavy. The land here refers to the homestead, and the foundation of the rural self-built house is constructed on the basis of the soil, if the foundation moisture-proof measures are not done, the moisture and water vapor in the soil will rise upward, making the ground of the rural self-built house very wet, and this situation will become more serious if it is not treated.

3. Check whether there are cracks in the ground at home, because cracks are the main channel for groundwater vapor to rise. At the same time, it is also necessary to check whether there is a hollow drum on the ground, which will peel and crack after a long time. If there is such a situation, it must be dealt with in time, and at the same time, the cracks and hollows should be filled with cement mortar and other materials.

Since there are many things to consider when building a house, safety and firmness are of course the first, followed by other small problems, such as moisture-proof is a dilemma for many things, after all, if the previous moisture-proof work is not ready, in addition to affecting the overall aesthetics, it will even cause cracks for a long time, and it is very troublesome to solve it later. Dampness in houses is more common in summer than in winter. The summer weather in the south is hot and rainy, and it is easy for houses to get damp.

When building a house, it is very humid from the first floor, how to prevent moisture better?

First of all, we need to understand the cause of the dampness of the floor, which mainly occurs on the first floor of the house. The main reason is that the moisture in the indoor underground soil layer rises with the increase in temperature. The reason is that when the house is built, there is no good foundation to prevent moisture, and the moisture in the soil will wash up through the soil layer and form a moist layer on the ground.

It must have been very uncomfortable to live in a house like this.

Regarding the moisture-proof measures of the wall, it is best to brush a layer of waterproof material first, and then add a layer of moisture-proof layer, especially those where the wall is connected to the ground or corners, which can also play a protective role; At the same time, it is necessary to pay attention to the decoration of the first floor, the wall can not be too weak, it is recommended to make another empty wall to expand the area of the wall. In addition, for kitchens and toilets, the waterproof layer of the wall can be made from the bottom up, and the thickness of the protective layer should be enough to meet a certain standard, so as to prevent the rise of underground water vapor and indoor flow; It is advisable to buy enough furniture at the same time as buying furniture, which is believed by the intruder to be able to effectively avoid the dampness of the ground because of the presence of sufficient households.

Things stored in the house are prone to mold and insects in a humid environment. It is to prevent insects with mothballs to prevent moisture, in the cabinet or between the contents of the warehouse, put some mothballs, can prevent insects and moisture. Activated carbon and desiccant can also be used to protect against moisture.

The above is the practice of the moisture-proof layer of the building foundation introduced to you, which has been economical and practical. When building a house, we must consider it comprehensively, design a good plan, and build a good cave house to live with peace of mind, otherwise it will be uncomfortable.