PSP2000 boots on black screen and the memory stick reads the light keeps flashing

Updated on Game 2024-05-11
13 answers
  1. Anonymous users2024-02-10

    It should be that your card is too much to insert and break the memory stick card.。。。

    Let's buy a new one...

  2. Anonymous users2024-02-09

    The stick is burned, go to the dealer to change it, and you have to re-brush it, and it is possible that the machine will be scrapped, alas, my little p used to be this problem, alas, tragedy, but I hope you can fix it.

  3. Anonymous users2024-02-08

    It's that the memory stick can't be read, so it's recommended that you plug it in and unplug it again. If it still doesn't work, it means that maybe the memory stick is really broken. It is recommended to use a data cable, do not use a card reader, and it is definitely not good for the memory stick to always plug and unplug.

    The 8g red sticks are all set sticks.

    It will be even smaller after formatting.

    This is normal.

    The reason for the difference is that the manufacturer and the system conversion method are different.

    **Around 110 150.

    The stick has a write speed of 7 10mb s, so ** is also acceptable.

    It is currently the best group stick on the market.

    But if you want to buy it, you still have to transfer a few more... There is no need to say much about the reasons for this

  4. Anonymous users2024-02-07

    There was an error in the system. Then put the psp back and it should be able to boot with the stick, then use the psp to format the stick again, OK. Of course, you can also back up the content of the stick after connecting to the computer, if you know which plug-in is causing the inability to turn on, then simply delete the plug-in, and don't even format it.

  5. Anonymous users2024-02-06

    I've also encountered the same problem.,It's a system problem.,It's best to format the stick and re-flash the system.,If you don't know how to flash the machine.,Go to the boss and give him 5 yuan to let him brush it for you.,It's OK.,PS:Let the boss play with Shendian for you.,You don't need a lattice yet....

  6. Anonymous users2024-02-05

    I pulled it out first.

    See if it can be turned on?

    If you can't, try a different card, I guess it's a card problem.

    Give Karg a try.

    Before upgrading the system? Try F1?

  7. Anonymous users2024-02-04

    The yellow light flashes in the memory stick.

  8. Anonymous users2024-02-03

    The orange light on the left is the reading light of the memory stick

    It means that it is a reading problem with the memory stick

    It should be that the memory stick is not reading well when playing the game, and it will crash and shut down when it is over.

  9. Anonymous users2024-02-02

    The graphics card, after booting, there is a problem that you have to get to the repair shop.

  10. Anonymous users2024-02-01

    The stick chip is broken, you can try to connect the card reader to the computer, and if you can recognize it, you will save the archive, but it is unlikely that you can recognize it. The flash memory chip is broken and has no repair.

    For a change, it is recommended to use an MS card sleeve (commonly known as a vest stick) and a brand's TF card. Of course, you're not short of money, and you can buy a stick.

    The group stick is completely a matter of luck, and the vast majority of them use some black chip flash memory, that is, the unqualified defective products produced by those flash memory manufacturers, the flash memory made by reprocessing the problem products, and the flash memory that has been dismantled from the first digital product, etc. There are even some ...... that are directly welded to an unbranded TF card

    The quality of these flash memories cannot be guaranteed at all, and if you are lucky enough to buy high-speed flash memory and have fewer problems in itself, it will be durable.

    If you are unlucky enough to buy a bad flash memory, you are prone to various problems, and this situation is the most common for you.

    Because flash memory is afraid of writing and not afraid of reading, how many times it reads does not affect the lifespan, but writing will affect the lifespan. The vast majority of people get stuck when copying things into the card and then have unrecognized, write-protected, etc., which is a typical symptom of a waste flash memory chip.

    So some people don't copy things once when they buy a group of sticks, and they can naturally use them for a long time, but this is not the reason to recommend them, after all, no one can tell what the quality of the chips of the group sticks is.

  11. Anonymous users2024-01-31

    There are several possibilities:

    1. If you put the battery in it, the green light will be lit without pushing the power button, no sound, black screen. Then prove that your PSP's battery has become a miracle electricity, you can take out the battery, plug it in and turn it on, put the battery in again, and then the next PSP magic battery conversion program. Just switch to a normal battery!

    2. If the machine has not fallen or entered the water, it is a brick. If you change bricks, you can only use divine electricity for now.

  12. Anonymous users2024-01-30

    Bricks... Go to the boss to brush off the machine··· Charges range from 10 to 50.

  13. Anonymous users2024-01-29

    Use the god brush machine to get it in 3 minutes.

Related questions
6 answers2024-05-11

I bought a 2000 with my girlfriend last week I originally wanted to buy 3000 But compared the screen on the spot I still think 2000 is good Although the color of the 3000 screen is soft, but it looks uncomfortable or the cold color of the 2000 is brighter and more pleasing to the eye I bought the 2000 is not cracked The empty plane is only 890 3000 empty plane red to 1250 The cost performance is also 2000 high。。。 Everyone's vision is different, the landlord to the scene to decide for himself The first question to give points!

6 answers2024-05-11

The problem of the machine's checkpoint.

There will be a white sticker on the right side of the bottom of the PSP host,There are three dashes connected with 4 groups of numbers,The second of them,The third group is the number we are looking for,The last PSP200X is the version of the identification machine,Look at the last number on the line,Generally speaking,The middle two sets of numbers should be consistent with the number on the packaging box,And the number in the battery compartment of the machine。 (You need to open the battery cover first to see the sticker inside) But the actual situation is that the PSP that is now shipped back to China is basically transported separately from the main engine and packaging, and then repackaged when it arrives inland, so many machines with the original chassis number have become incorrect, which is very normal, especially the Japanese version of the machine. Because the Hong Kong version is relatively easy to ship to the mainland, it is not difficult for the Hong Kong version of the machine to find the right chassis number, but the Japanese version of the machine is very rare. >>>More

13 answers2024-05-11

First: Your situation is likely to be a damaged memory stick, the memory stick is a very fragile thing, after repeatedly copying games and del games, there will be game errors, save corruption, etc. It is recommended to format it with PSP (not with a computer) and then flash it. >>>More

10 answers2024-05-11

White bar 2000 words white and black seem to be cheaper than other colors I am now fighting against Japan My own thing is blue (Xinghai limited edition) Now the more beautiful mint green and Xuanyi blue Silver and Christmas red are also very cool (I don't know if there is one in China) LZ Since he cares so much about color, he must be a person who cherishes small p very much, and he will definitely buy a protective case.

18 answers2024-05-11

Now the system of the new game is required.,It's not cracked yet.,Just wait.,There's a cracked program released in a few days.。 >>>More