Urgency How to make an old computer new, how to use the replacement configuration hardware ?

Change the old word to the new one.

The old computer becomes new, this mainly depends on how old the computer is, the core component, of course, is the motherboard, if the motherboard is very old, then it is also difficult to upgrade.

Not to mention the motherboard of the first generation,If it's a DDR2 motherboard,The room for upgrading is very small,Because DDR2's single root is only 2G maximum,So even if it's 4 channels,It's not up to 8G,The processor to E7 is about the same,Hard disk does not support solid-state,At most7200R mechanical disk,So the upgrade is very limited,Not to mention the graphics card,The motherboard can't be upgraded,The graphics card can be upgraded is also a chicken rib。

If it is the current E3 or B85 motherboard, then it is needless to say, because the hardware of this motherboard is already considered mid-to-high-end, and there is no need to upgrade.

You can buy it on the Internet, or you can go to the place where you sell 2 hand pieces in the computer city, if you want to buy it on the **, I recommend that you buy it at the lowest cost.

I don't know exactly what motherboard you have and what processor you have, and I can't help you determine an accurate solution. There's also a look at what you're going to do.,If it's just going to go online to watch movies.,Chat.,I suggest that the memory is added to 1G, and the processor is more than 2800 if Intel has to run above, if AMD has to spend more than 2800。 It's guaranteed to be smooth (relatively).

If you still want to play games, you have to add a graphics card, depending on your configuration, it should be the motherboard of the AGP interface,The best for AGP is 6600GT250 yuan。 It can also be changed.

6200 (performance reduced at once).

It's all right.

For the 2nd floor, I don't recommend you to change this, because most of the 7300 are PCIe interfaces, and there are also AGP interfaces, which are new architectures and new kernels, and he just changed the interface to AGP, but the old motherboard generally does not support this relatively new graphics card very well, and it can't play its performance well, it is estimated that it may not even be as good as 5700, and the only good point may be that the picture quality is better. And it can't be 200 yuan at all**,That's the kind of PCIe interface**,If AGP is more expensive than 6600.。。。

And a single memory of 1G is more than 180 yuan... 512's got 80 too...

I wonder if you understand it on the second floor??? You think it's DDR2

This? If you say according to the 3rd floor, I don't exactly recommend it.,In fact, the computer still depends mainly on what you do.,If you're only used for Internet access and office.,The upgraded configuration is enough.。。

Just press to buy 512 memory.

9600 graphics card is enough for 300 yuan.

But you have to get a new one ... If you think about it, 300 can't even buy a motherboard.

1. Install SSD solid state drives, and good steel should be used on the blade. First of all, we have to make it clear in what circumstances your computer is stuck, for example, your computer is very slow in daily use, such as booting, opening browsers, files, hard disks, office and other light application software when it is stuck, then the problem is that your hard disk reads and writes the silver chain, at this time the easiest and most effective way is to install an SSD for your old computer, and use the SSD as a system disk. The read and write speed of SSDs is several times to dozens of times that of HDDs, which will significantly improve the daily experience.

2. Add memory and group dual channels. If you are not satisfied, or in some cases the computer will still have lag, at this time we can also see how much memory your computer has, whether there is a memory bottleneck. Memory is where the CPU temporarily calls and stores data during operations, which has a great impact on the speed of the computer.

3. Clean the CPU fan and reapply the silicone grease. The old computer is stuck, and there is a big possibility that the silicon grease between the CPU radiator and the CPU is dry, at this time, the situation is that the CPU temperature is not doing anything, and the temperature begins to soar when it is applied lightly, so that the CPU overheats and reduces the frequency resulting in Caton, ** Master Lu can detect the CPU temperature, and the maximum temperature is generally not more than 80 degrees.

Method steps.

1. Some people put everything on the desktop, and feel that it is very convenient to find it in this way, but they don't know that this is very affecting the speed of the computer, so they must be classified well, keep a clean desktop, and delete the useless ones.

2. Open my computer again, find the temp folder under the windows folder under the C drive, open it, and delete all the files in it, you can do it once every half a month or once a month.

3. Delete the uncommonly used ones in the taskbar at the bottom of the screen, and don't show them on the taskbar.

4. Open the computer again, right-click each drive letter, click Properties, click on the tool option, and check and optimize each drive letter.

5. Right-click on the blank space of the desktop, select the personalization option, set the screen saver to none, and the system can use the default sound.

6. Open "My Computer" again, right-click each drive letter and select Properties. Click Disk Cleanup, if the drive letter is large, it will take a long time, and you need to be patient. When I clean up, I come with a drive letter one by one.

Step is intended to be framed with an i3 B75 motherboard.

Only the graphics card and hard disk can be used, and nothing else can be used.