If you don t have a film, you can t find a film without white edges

The film protects the phone.

Chapter 55: Insulting relatives and daughters and foolish concubines to compete for idleness, bullying young masters and slaves to be dangerous.

Mobile phone filmThere are several ways to deal with white edges:

1. Take a toothpick and dip it in cooking oil.

olive oil or clear oil), dot to the periphery of the white edge, walk along the white edge, let the oil slowly enter the white edge, this is the key, take your time. You can wipe off the excess with paper, and finally dry the appearance with a dust-free cloth, and it will be solved.

2. If the first method doesn't work, you can also buy an artifact called white edge remover on the Internet, and apply it along the white edge.

3. If the first two are invalid, it is recommended that this partner buy a full film and re-paste it.

Pay attention to the mobile phone film, when buying the mobile phone film, you will generally give auxiliary tools to help us better film, first wipe the mobile phone screen with a wet paper towel, you can wipe the dust and stains on the screen well, especially the edge of the mobile phone, in order to have no white edges, you need to focus on wiping.

When we wipe the mobile phone screen clean, we can wipe it again with the small cloth given to wipe off the water stains remaining on it, which is conducive to the film.

The situation that the mobile phone film has white edges and cannot be adhered to can be roughly divided into the following three reasons:

Inferior mobile phone film: In order to seize the market, some businesses have started production before the new machine is listed, and the result is that the details such as openings and edges are not handled well, and the probability of white edges will be higher.

Film technology: Generally speaking, the texture of the tempered film is hard, and it is relatively easy to paste it yourself; However, if it is a soft film type, if it is not successful once, it is easy to develop white edges in the place where it is lifted many times.

Screen tolerance: As mentioned above, Apple's mobile phone uses glass, which has a curvature at the edges; However, even the machine cannot guarantee that the screen size produced is exactly the same, as long as it is reasonable within the control range, but this error is magnified when the film is applied. If you have to apply a film to your mobile phone, then buying a full-coverage film glass film can effectively prevent white edges.

In addition, if you buy a white panel model, you can automatically eliminate your worries.

When you start with mobile phone film, try to choose a merchant with quality assurance; After all, in addition to the white edge of the film, inferior mobile phone film will also affect the feel and light transmittance.

If the white edge of your mobile phone film is not too serious, you can try to use a toothpick dipped in cooking oil to gently repair the white edge, there is a certain chance that it can be removed.

Because many of today's mobile phones have arcs, generally in response to this situation, merchants who sell films will come with edge banding glue.

The film has a white edge treatment:

1. First of all, if there is not much white edge on the edge, you can eliminate the white edge by pressing it sufficiently, and there is no need for other redundant operations.

2. The second method is to use the anti-white edge solution to eliminate the white edge.

3. The matching white edge elimination is a small brush and transparent oil liquid, which can be dipped in transparent oil with a small brush and rubbed around the edge of the tempered film, which can slowly fill the blank space through the gap.

4. Through the above methods, the white edge can be eliminated smoothly, if there is no equipment, you can use the oil or light oil to replace the white edge sealing oil.

5. Roll a pointed paper head with a paper towel, dip the salad oil and walk along the white edge to eliminate the white edge.

6. After this method, the white edge can be completely repaired, but if the white edge is too large, it is necessary to replace the film.

Causes of white edges on the film:

Inferior mobile phone film: In order to seize the market, some businesses have started production before the new machine is listed, and the result is that the details such as openings and edges are not handled well, and the probability of white edges will be higher.

Film technology: Generally speaking, the texture of the tempered film is hard, and it is relatively easy to paste; However, if it is a soft film type, if it is not successful once, it is easy to develop white edges in the place where it is lifted many times.

White edge remover and a small brush and cloth are required.

Tear the tempered film, stick it on the surface of the phone according to the shape of the phone, gently wipe it with a cloth, push out the bubbles in the film, and you can see that there are two white edges left on both sides of the phone film. Use a fine brush to dip a small amount of white edge filler and apply up and down to the white edge edge.

When the filler spreads and fills the white edge, you find that the white edge of the mobile phone screen has disappeared, and there are two ways to apply the filler: one is to squeeze the filler from left to right, but to fill it once at intervals, so that the filler can be slowly diffused and connected. After applying the filler, use a cleaning cloth to wipe off the excess filler, mainly do not use too much force, so as not to squeeze out the filler in the gap; In addition, the filler is harmless to the mobile phone and the human body.

How the white border appears

The appearance of white edges is mainly due to the fact that today's mobile phones use curved glass for a better grip, while the ordinary tempered film is still a flat one, which can only stick to the flat part in the middle of the screen.

There is nothing that can be done about the curved edges, so there will be white edges. The filler has a certain effect, but pay attention to try to use a small amount when you first apply it, and don't squeeze out too much at once to prevent it from entering from the edge of the screen and affecting the screen display. When you start with the mobile phone film search, try to choose a merchant with quality assurance; After all, in addition to the white edge of the film, inferior mobile phone film will also affect the feel and light transmittance.

According to the film master in our store, this glass has black spots on the edges, the sun film.

There is a metal and non-metallic coating, which will make the solar film relatively hard, and the rear windshield glass has a heating wire, the heating wire is in the glass, there is residual water vapor between the film glass, and the water vapor around the heating wire will be, and when there is a light illuminated behind the night when the water vapor will produce scattered light connection, forming a lamp post to affect the driving line of sight. However, as the water vapor slowly evaporates, the connection of this scattered light will gradually decrease until it disappears, so you should worry too much.