What do you need to pay attention to in the construction plan for the installation of household radi

Copper-aluminum composite radiator is a new type of high-efficiency and energy-saving heating radiator that makes copper tubes and aluminum wing profiles into heat dissipation components with precision pressurization process. Because of its outstanding anti-corrosion performance, universal applicability, good heat price ratio, high value retention rate and beautiful appearance, it has become one of the hot products in the cold winter. There are many models of copper-aluminum composite radiators, and the amount of heat dissipation is also divided according to the different models, and the corresponding ** is also different.

Radiator installation is the most important link for consumers before using radiators, because the quality of radiator installation not only affects whether the radiator can be used normally, but also directly leads to the main reason for many problems such as radiator leakage and radiator not heating.

The first step: first carry out on-site measurement and design with the heating designer, determine the model, number of pieces, water inlet and outlet mode and specific installation location of the radiator, according to the actual situation and communicate with the owner, determine the model, number of groups, number of pieces per group and installation location of the radiator, and sign the radiator purchase and sale contract with the seller.

Step 2: Sign a construction agreement with the radiator construction unit to ensure the quality and risk of construction, and the general construction unit should indicate on the construction agreement that the construction of the heating system should be guaranteed for two heating seasons. It is best if the radiator sales unit and the construction unit are the same unit.

Step 3: Construction of the first phase of radiator installation. The installation of the radiator is a two-step process:

Phase I and Phase II. The first phase of the heating project includes the positioning, slotting, pipe routing (or pipe modification), pipe connection (welded pipe), installation of water collector and distributor, pressure test, etc.; The second phase of the project includes: the installation of radiators (fixed suspension of radiators, the connection of valves with radiators and heating pipes), the pressurization detection of the whole system and the commissioning of radiators.

The first phase of the project needs to pay attention to the following points:

1.The first phase of the heating project is carried out after the wall renovation, before or after the construction of the water and electricity and must be carried out before the construction of other decoration processes. Before the first phase of the heating project is completed and signed by the owner, other decoration processes are never allowed to be constructed.

2.For the sake of aesthetics, if the heating installation is carried out before the decoration, the branch pipe connected between the heating main and the radiator must be buried under the floor and in the wall, and only the temperature control valve can be seen when connected with the radiator; Now there are a lot of heating engineering construction personnel in order to save trouble, the branch pipe leaks directly from the ground and connects with the radiator, so that each group of radiators has two pipes leaking outside, which is not only unsightly but also easy to break.

3.During the first phase of construction, the pipeline must be fixed and sealed according to the number of radiators, the width of a single piece, the distance between the pieces, the water inlet and outlet methods and the center distance of the interface, and the size must be accurate, otherwise the installation of the radiators in the later stage will be affected. At the end of the first phase of the project, the owner can only seal the groove after passing the acceptance on site, and the first phase of the project will be completed.

After the completion of the first phase of the heating project, the decoration workers must pay attention to the heating pipes and facilities during the decoration process, and must not move or damage them.

Step 4: Construction of the second phase of the radiator installation. After the decoration work of the customer's home has been carried out until the wall has been painted or the wallpaper has been pasted, the second phase of the project construction, the installation of the radiator, the installation and the pressure test are qualified, and the installation of the wooden floor can be carried out.

Radiator is a very common heating equipment, it is a new technology, however, in winter, radiator is very popular with consumers, it has a short installation time and good heating effect. Next, we will introduce the radiator construction steps and radiator installation precautions.

Radiator construction steps.

The first step is to groove the floor or wall.

The construction can bury the exposed pipeline in the ground grooved place, but the depth and width should be reasonable.

The second cloth, laying the pipeline and protecting the card slot.

The laid pipeline can be protected according to the customer's needs, and then the system can be closed and pressed with water injection.

The third step is to install the water collector and distributor.

When installing the water collector and distributor, it is necessary to pay attention to maintaining the level, so that the flow of water can be facilitated.

Step 4: Install the radiator.

When installing the radiator, the valve connection and the valve of the inlet and outlet should be connected, and then the radiator should be measured whether it is straight, and the connector should be tightened with a pipe wrench reinforcement.

Step 5: The installation of the heating hand envy skin sheet system is completed.

Once the entire radiator has been installed, it can be used.

Precautions for radiator installation.

1. It is necessary to determine the location of the radiator first, and determine where the radiator is installed for good heating effect and good safety performance.

2. When installing the heating sheet, it is necessary to pay attention to the tightness of the very key, and must not leak, and then, from the difficulty of construction, it is best not to change the position of the heating pipe, if you do this, the worker must go to the neighbor's house for construction, which may cause inconvenience to other people and the construction.

3. The test of the heating system is indispensable, the general worker will reserve the valve on the pipeline, and then carry out the stamping test to prove that there is no running, dripping, and leaking place before the acceptance can be completed.

Radiators are an indispensable part of the heating system, and the correct installation can ensure the proper functioning of the heating system and the comfort of the home. The following are the precautions for radiator installation.

First, choose the right location to install the radiator. Radiators should be installed in the coldest part of the room to ensure that the heat is evenly distributed throughout the room. At the same time, radiators should not be installed near doorways, windows or vents to prevent the influence of cold air on the radiators.

Secondly, choose the size of the radiator correctly for early shooting. The size of the radiator should be chosen according to the size of the room and the amount of heating required. Choosing too small radiators can lead to insufficient heating, and choosing too large radiators can waste energy and incur unnecessary costs.

Third, connect the radiator and the pipe correctly. When connecting radiators and pipes, make sure that the connection between the pipes and radiators is well sealed to prevent water leakage and wasted energy. At the same time, suitable pipes and fittings should be used to ensure the stability and safety of the joints.

Finally, pay attention to the maintenance and cleaning of radiators. Long-term use of radiators can accumulate dust and dirt, which can affect the heating effect and air quality. Therefore, radiators should be cleaned regularly and well ventilated to ensure the proper functioning of the heating system and the health of the home.

In conclusion, the correct installation of radiators can ensure the proper functioning of the heating system and the comfort of the home. When installing radiators, care should be taken to choose the right location and size, properly connect the pipes, and regularly maintain and clean the radiators. If you are not sure how to install radiators, it is advisable to seek the help of a professional.

1. At the beginning of heating, the gas sheet next to the warm potato should be deflated, so as to ensure the heat dissipation.

2. The radiator should be installed under the window, which can prevent the discomfort caused by the cold air of the window and pollute the wall.

3. Full water maintenance throughout the year, full water maintenance of radiators of any material is an effective means of anti-corrosion.

4. The radiator package cannot be added, one is that the number of radiators is lacking in rubber bags to hide dirt and dirt, and the other is to affect the heat dissipation effect.

5. Avoid using in a humid environment. The radiator uses the boiler to burn steam or hot water, which is transported to the radiator (commonly known as radiator) in the building through the pipe, and dissipates the heat in the form of radiation or convection, so that the room temperature increases.

If the heating at home is not hot, it will affect the life of the family, so it is necessary to deal with it in time, and if the heating is not hot, we must first find the reason, and treat the radiator not hot for the reason, so that the winter at home is no longer cold. In winter, the weather in the north is cold, and choosing the right heating equipment in time can also make the family spend the winter comfortably and comfortably.

1. Some families will decorate in summer or non-heating period, and often forget the installation of radiators at this time. However, once it enters the winter, when it is needed, it is necessary to carry out secondary construction, which is quite troublesome and has a great impact on our daily life. Therefore, the installation of radiators is best designed and installed at the same time as decoration.

2. When installing radiators, safety is the first element. In addition, from the function of the radiator, the installation location should also be reasonably selected, it is best to install it under the window, which can not only prevent cold radiation and cold air circulation, but also make the indoor temperature relatively stable, and there will be no sudden cold and hot situation.

3. When purchasing radiators, do not buy products sold in the community for convenience, it is best to buy qualified radiators in large building materials markets or regular stores.

4. When installing, you should first consider the area of your home, the number of rooms and the characteristics of the heating system, etc., and purchase the appropriate heating model, material and quantity. It is worth noting that the radiator material we choose must match the heating environment of our own community, if the oxygen content of the water used for heating is relatively high, it is not suitable for using steel radiators.

5. When installing radiators, be sure to find a professional installation company, and it is best not to install them yourself. During the installation process, care should always be taken to avoid water leakage. To ensure that the water pipeline is straight, use joints in the connection place, and do not make the pipe elbow, which will increase the resistance of the pipeline and affect the heating of the radiator.

6. After the installation is completed, it should be noted that the heating system is not an immediate product, and it takes a certain amount of time to test the quality of the performance, so it is good to do the necessary tests. After installation, the stamping test is carried out first to prove that the radiator does not run and drip to be qualified.

The above six points are some radiators of the installation and precautions, of course, there are more than these, some specific special situations also need professional installers to solve, do not do it yourself if you do not understand.

Mainly from the following three aspects to pay attention to, installation location, installation method, and water inlet and outlet methods. The installation position is as far as possible under or next to the window, and the installation method is to see whether it is connected in parallel or in series. If there is still any problem with the limbs of the hall, it is the way to get out of the water, which is chosen according to the situation at home, and Rubens Heating hopes to help you.

1. Professional personnel are required when installing radiators, and they must not act rashly. It is also necessary to determine the location of the radiator and determine where it is best to heat up, without losing its appearance and safety.

The water quality of heating needs to meet the national standard, if there is no heat in normal use, the valve should be opened, the blocked gas should be released, and the gas release valve can be closed when there is water overflowing. The radiator is a closed long-term heating system, do not connect with the pressure cooker, of course, can not be connected with domestic hot water, do not cause unnecessary trouble to yourself for temporary convenience.

The radiator is installed in the non-heating period and needs to be full of water, because the water in the radiator is not enough or there is part of the water retention, which is very harmful to the radiator.

When installing, the radiator is safely sealed, and it must be noted that there can be no water leakage, and in case other objects hit the radiator, if there are scratches, it should be repaired with the same color paint in time to avoid damage. Because once the location of the radiator is determined, if you want to change it, the worker has to go to the neighbor's house to work on it, which may cause unnecessary trouble to others.

After the installation of the radiator, to carry out the test acceptance, generally in the replacement of the construction, the worker will reserve the valve on the pipeline, after the installation of the stamping test, such as the first no running, rising, dripping, leaking place, indicating that the installation of the radiator is very successful. If the radiator has been used for a long time or there is dirt during installation, when it needs to be cleaned, organic solvents can not be used, but can be cleaned with soapy water or detergent, because organic solvents may corrode the radiator.

With the improvement of the quality of life, people pay more and more attention to the mode of life, the cold weather has been rented and filmed no longer makes us afraid, and the popularity of radiators has become the first choice for cold protection in home life. In our selection of radiators, proceedRadiator installationHow to choose a radiator, to understand the details of the radiator, size, the space it occupies, etc.

Before the installation of the radiator, let's understand the heat dissipation principle of the radiator, which is convection heat dissipation through indoor air circulation, and the temperature rises quickly, and the ideal temperature can be reached within half an hour, which is why we can enjoy the warmth brought by the radiator.

When preparing the radiator for installation, we first need to screen the wall. For the radiator to achieve the best results, it is also important to install the radiator. In order to make full use of the radiator to play the best effect, you can choose to close the exterior wall window, close to the exterior wall of the ground mold closed, usually will have the best heating effect, radiator installation also has some tips, first of all, size.

When installing exterior wall windows, it is necessary to maintain a certain distance from the ground, about 10 cm away, and the distance between the wall is mostly 3 cm. You can also choose to install a shield on the radiator that does not affect the heat dissipation to improve the aesthetics.

The size of the pipe can be determined according to the condition of the heating pipes in your home. The radiator pipe diameter has 4 points, 6 points, 1 inch tube, when selecting the radiator, to select the decoration location, you can also measure the specifications and required number of radiators through the measurement of professionals, you can start to install.

The radiator has a high cost performance, the comfort is also good, it is also easy to replace, the maintenance cost is lower than the disadvantages of the envy, compared to the floor heating that needs to lay pipes, the radiator installation is better!