If you want to get a tooth out, which is better? Tell me if you know. Give 100 points 100

According to your introduction, you can understand; You've had a root canal**. Then the suggestions are as follows: the upper and lower anterior teeth can consider porcelain teeth or all-porcelain teeth, porcelain teeth are not easy to occur gum staining, all-porcelain teeth will not occur gum staining, but it is expensive.

Ordinary porcelain teeth** are relatively inexpensive, but gingival staining can occur.

Porcelain teeth or metal crowns can be considered for upper and lower back teeth, simple metal crowns can meet the requirements of oral restoration, but the aesthetics are poor, and porcelain crowns are generally the first choice. All-ceramic crowns are not recommended, but can be used if you have high aesthetic requirements.

It is best to use titanium, which is also called space metal. Futuristic in nature, tough, corrosion-resistant, does not turn black, is not allergic to anyone, and is the only metal that has no effect on human autonomic nerves. I made one a few years ago.

If you say upstairs that you want to use porcelain teeth, I don't think it's good except for beauty, and if you make porcelain teeth, you have to cut your own teeth very small to fit, because porcelain teeth are very thick!

Titanium is different, it doesn't need to be thick, and its own teeth don't have to be cut very small.

The tooth? Is nerve killing a root canal**? If not, it is recommended to do a good job of the root canal first, and then drive the pile, do porcelain teeth, and porcelain teeth have two categories, a metal porcelain, a non-metallic porcelain, the former has a metal inner crown no matter what material the inner crown will have a metal wire for a long time, including ** porcelain, non-metallic porcelain does not, but the price is expensive, a crown will cost 3500-7000, a pile about 1500, if the big tooth may need 2-3 piles, So now the first step is to determine whether a root canal has been done**, it is best to take a root tip film to see, and then think about what to do with the tooth

If the tooth is broken, you must first make sure that the pulp is exposed, if it is not exposed, and the fracture is the incision, then you need to do a braces restoration, that is, to make a porcelain tooth, if the nerve is leaking, you need to extract the nerve ** in the repair. It can be repaired with a beauty crown.

Cast crowns: These are metal dentures. At present, it is basically eliminated.

Metal porcelain crowns, mainly nickel-chromium and cobalt-chromium metal porcelain crowns, but nickel-chromium has metal ions precipitation out of foreign countries have long been banned from use. Cobalt chromium is ok. Titanium alloy is garbage, low titanium content is pitiful, in fact, it is titanium-containing nickel-chromium alloy.

All-ceramic dentures are mainly cast ceramic dentures and zirconia dentures. The Chinese market for zirconia dentures is very chaotic, don't consider the domestic ones, and the imported brands mainly include German Wieland, Zekang, and Rava in Germany. Among them, Lava** is too high.

But then again, ordinary patients do not have the ability to identify zirconia materials. Casting ceramics is a good choice when the financial means are limited. Because there is no cottage in cast ceramics, the main brand is Yihujia, with a market share of 95%.

But if you lose a tooth, the doctor will use the adjacent teeth on either side of him as abutments. You will need to have a total of 3 dentures.

Finally, it is recommended to go to the dental department of a regular big hospital**, and do not try to go to the street outpatient clinic cheaply**. Many of the doctors in the street clinic are not qualified to practice medicine. There are also many fake doctors who have been apprentices.

Porcelain teeth, preferably without metal, because the gums will turn black after a long time. All-ceramic tooth is non-toxic and harmless, and close to real tooth, but it is relatively expensive. It is recommended that you go to the dental clinic for a visit, and the doctor will give you the best advice.

It is best to make a minimally invasive bridge, which is invented by our countrymen, so that there is no need to damage the teeth on both sides

Zirconia is currently the best material that is compatible with the oral cavity, **It is relatively expensive If you are in Ningbo, you can contact us, I work on porcelain teeth, **You can get a discount.

Dental implants are recommended. Do not damage the tooth next to it.

There are three possible reasons for a tooth to be lost.

1. I have made up for it before, but what I dropped was the medicine that was made up, not the teeth.

2. What falls off is dental calculus.

3. The teeth are worn by hard objects, and part of the teeth is lost.

If it is the first type, it will regenerate cavities after a long time, so it is better to fill it as soon as possible.

If it's the second type, it doesn't matter, many people's calculus will fall off on its own, which is normal.

If it is the third type, it is easy to cause the dental nerve to be exposed, resulting in pulpitis, toothache, tooth decay, etc., it is best to make up when it is not painful, so as not to suffer from pain in the future.

How much is broken? Teeth moving? What about the gums? Is the root broken? Which one exactly? Broken teeth are extremely aesthetically affected, so going to the clinic is the best consultation.

I can't really see which part of the tooth you're missing, so I can't explain it to you.

Hello, this aspect of the problem, according to the degree of damage to the front teeth can choose different schemes, veneers, chairside repair are OK, the general hospital will recommend the choice of chairside restoration, get a braces to protect the teeth, it is recommended that you can go to the dental hospital to take a film to check the condition of the teeth, and then choose the appropriate program.

Hello, the cost of a tooth replacement depends on your individual dental condition and the materials you choose. If the cost of ordinary tooth filling is not very high, if the pulp has been damaged, it is recommended that you do root canal treatment, etc., then the cost will be relatively high.

It is recommended that you go to a dental clinic**.

It depends on what kind of hospital the individual goes to, different hospitals, and the installation of teeth, are very different, and it is not good to say. I heard that Inner Mongolia. Huayi Dental Hospital is very good in this regard, you can go here and ask, I hope it can help you.

See what materials you do? The average three hundred one.

You can look for it at your local dental hospital**, if you have teeth** it is generally in the hundreds to thousands, not less than 500. However, it still depends on the quality of the material.

The porcelain tooth material has the advantages of beauty, close color and luster to the tooth, and good biocompatibility, so the porcelain tooth rarely has gingival discoloration.

Porcelain teeth are divided into *** porcelain, semi-*** porcelain, and non-metallic porcelain.

Non-*** porcelain teeth are mainly divided into nickel-chromium alloy porcelain crowns, titanium cobalt alloy porcelain crowns, gold-platinum alloy porcelain crowns and gold deposition porcelain crowns.

Semi-*** porcelain teeth mainly include silver-palladium alloy porcelain teeth and gold-palladium alloy porcelain teeth. Silver palladium alloy porcelain tooth with silver palladium alloy as porcelain base, because the finished porcelain tooth base is white, so it is also called white gold porcelain on the market. But now due to the stability of silver in the oral cavity, further research is needed.

The palladium in the gold-palladium alloy porcelain tooth is a kind of biocompatibility with good quality, and the addition of gold and palladium has reached about 80%, which has a fairly high biocompatibility. The gums at the neck margin of porcelain teeth rarely appear plain black, and the gums are black, and generally do not cause gum discoloration. It also has good physical properties and is the best substitute for ***.

It is economical and is the most recommended type in developing countries.

Porcelain teeth contain about 86%, so they are also known as porcelain teeth, with excellent biocompatibility, stable metal properties, corrosion resistance, good metal ductility, and very little gum discoloration. In addition, porcelain powder can reflect its own color on the surface of the first grade, making porcelain teeth more beautiful, and fully meeting the requirements of beauty restoration. Therefore, the best porcelain has both the beauty of all porcelain and the strength of metal porcelain teeth, and is currently the most respected metal porcelain.

The order of the best materials is, ** porcelain, gold palladium porcelain, silver palladium porcelain, nickel chrome porcelain.

There are many types of porcelain teeth, which are divided into three categories according to the different materials of their metal base crowns: alloy porcelain crowns (represented by gold alloy porcelain crowns), non-alloy porcelain crowns (represented by nickel-chromium alloy porcelain crowns, cobalt-chrome alloy porcelain crowns), and titanium alloy porcelain crowns.

You need to go to a professional dental hospital to choose the best material for yourself according to the examination, not the most expensive is the best, only the one that is suitable for your mouth is the best.

Personally, I think ** is secondary, don't worry if you do it well, Haitao is very good, take a look.