How to tie your shoelaces in your own style?

Grid method, after the laces of the same length on both sides pass through the No. 1 shoe hole at the bottom of the left and right sides, pass the left shoelace through the No. 4 shoe hole on the right side, and count it clearly! Leave two shoe holes. Slip the laces of hole 4 back into hole 2 on the left and complete the first round.

Thread the laces of the No. 2 shoehole through the upper hole on the right side so that all three layers on one side are fully worn. The right shoelace is then worn through the 4th hole on the left, and the method of saving is the same as the step, and the direction can be changed. But be careful, if you want to look better, remember to interweave up and down, so that the laces on both sides can be pressed together!

The key to ensuring three parallel lines is that the laces on the same side are threaded through the same side first, and then through the opposite side. Such a beautiful grid will appear on your shoes!

The weaving method looks very complicated, but after practicing both sides, it can also be tied very well, mainly because of this complex pattern, which is really only worn by goddesses. Prepare two laces and thread them through the top and bottom holes on the left, taking care to wear them on the inside of the tongue. Follow the simplest way to tie the shoelaces before, and put the blue laces on step by step.

Pick a lace of another color and thread it up and down the blue lace as if it were a weave. Thread the white lace on the other side through the blue lace in the same way, and separate it from the direction of the lace in step 3. Wear and weave it three or four times repeatedly, and you can do it!

Up and down edge method, this method is best to choose two laces with a large color contrast, so that the effect of tying up is better. First, after fixing the laces inside, pull them outward; The shoelaces follow the Z-shaped method of going up and down, and then repeat this step to form the shape of a "one", and hide the remaining shoelaces inside the shoe; Next, you have to wear the second shoelace, according to the first shoelace fastening method, but pay attention to the second one is always on the first, after the end is also to hide the remaining shoelaces in the shoe, fixed, so that the personalized shoelace is completed.

In the advanced interweaving method, the laces pass through the bottom two holes evenly, just like ordinary laces, but it should be noted that the third hole is passed through at the same time, leaving the second hole. After the laces are crossed once, go down through the second hole on the same side, and the rest of the steps are the same as 1, but instead of leaving the hole, you can wear it one block down. Or follow the original steps, weave the horizontal 8 back and forth, and when encountering the overlapping shoelace part, pass it up and down and then wear it into the shoehole, which can make the shoelaces look better.

After following the steps above and repeatedly weaving up and down, you finally get an evolved version of the figure 8 lace tie method.

Centralized cross method, first leave a hole under the shoe hole, according to the personalized shoelace method** from 1 to 2 from the outside to the inside, the white shoelaces are worn according to the cross method, and the remaining shoelaces are worn from the outside to the inside after being tied; Next, you need to tie the blue laces, thread the blue laces into the first hole, cross the white belt and cross into the next hole, and the laces are also worn into the rest of the holes in the order from the outside in, and finally the tail of the blue belt is put into the previously made ferrule and tightened to complete the personalized lace wearing method.

Butterfly shoelace tie method, of course, the goddess is full of sisterhood, with a bow on her body is too fancy, not as good as the bow on the feet, scheming to surprise you. Thread the laces through the hole and tie a simple lace cross. The most important part is to put the laces on both sides down, through the No. 1 hole on the same side, and then through the No. 2 hole from the surface, so that the bow is worn.

Thread the laces up from the inside and start the second bow! After wearing three bows, a pair of butterfly shoes is complete!

In the double-layer interweaving method, take a shoelace, fold it in half, and pass it directly through the No. 1 and No. 2 shoeholes on the right side. Then pass the two sides of the lace parallel to the left side of the 1 and 2 holes, and then up through both the 3 and 4 holes. Repeat step 2 until the end is finished, and when the top lace is finished, there is no opposite side hole to wear out, just go through the same side hole!

4 ways to tie high-value shoelaces! Teach you how to tie your shoes in a fancy way, and make your shoes different every day.

Brother Yee's same method of tying shoes, have you ever seen it?

Brother Yee's same method of tying shoes, have you ever seen it?

Several ways to tie your shoelaces are good:1. Cross knots1. One end is knotted on the inner side, and the other end is perforated in order;

2. Jump a hole and penetrate it;

3. Tie it in the same way;

4. After repeating, the remaining shoelaces are tucked into the inner side and knotted;

5. Purple shoelaces are also perforated in the same way and in order;

6. Wear it from below and then out from above;

7. Choose harmonious laces according to the color of the shoes;

8. Excess shoelaces are knotted on the inside.

2. Trapezoidal knots1. After adjusting the length of both ends of the laces, pull out the laces from the inside to the outside;

2. Pull out the shoelaces and thread them into the second hole from the outside to the inside;

3. The left shoelace is worn out from under the shoelace between the two holes on the right, and the right side is the same;

4. Repeated operation;

5. Pay attention to the direction of the cross laces at both ends;

6. Excess shoelaces are stuffed into the shoes and knotted;

7. The trapezoidal knot after completion.

3. Twist knots1. Two shoelaces are knotted inside and worn out;

2. Wear out of the second hole after the two shoelaces are crossed;

3. At this time, in order to center the intersection as much as possible, tighten the laces;

4. The appearance of twist is produced in the process of centering the intersection;

5. Enlarged twist knots**;

6. Leave the last hole;

7. Finally, use x to deal with it, so that it is more convenient to put on and take off;

8. The remaining shoelaces are knotted together in the shoes.

Fourth, double X knot1. Start with the second hole and run through the laces from the outside to the inside;

2. Tie white shoelaces with the X knot method;

3. White X knot look;

4. The end is plugged into the inner side and knotted;

6. Knot the ends of the blue laces;

7. The remaining lines are relatively long, and you can make a ring;

8. Go around a few times and pass through the ring.

Fifth, double direct knots1. After leaving a length of yellow laces, they are worn out of the left face and entered from the right face;

2. Wear shoelaces in the direction of the dotted line;

3. Adjust the shoelaces so that they remain in a straight shape and do not roll them up;

4. Tuck the excess part into the shoe;

5. Also leave a section of the white shoelace on the inside, and knot it with the yellow shoelace inside;

6. Wear shoelaces in the direction of the dotted line;

7. Adjust the white shoelaces so that they are on top of the yellow shoelaces;

8. The excess part is knotted with the yellow laces on the inside of the shoe.

6. Diagonal knots1. After passing through the first hole, make a single knot inside, and the other end passes through the third hole on the left side from the inside to the outside;

2. The shoelace is then threaded through the second hole on the right side;

3. Use blue laces to complete the slash knot;

4. Use white shoelaces to tie a diagonal knot in the opposite direction;

5. The method is the same as that of blue shoelaces;

6. The blue and white laces eventually come out of the hole of the tongue part;

7. The appearance of piercing out of the tongue part;

8. It looks better if it is loosely tied.

7. Internal X knot1. After something is consistent at both ends, each end is pierced through the second hole;

2. Penetrate into (2) hole from (1) hole, and then penetrate out from (3) hole;

5. Knotting on the inside;

6. The finished style.

Brother Yee's same method of tying shoes, have you ever seen it?