How to debug the Diyut X5 TV set top box

Go to the official forum to find out, the official forum will have many solutions.

In this case, you need to flash the computer, press the uboot button, and then find the appropriate firmware.

If you still don't understand, you can explain it to you on QQ 709853063

The main reasons why the Diyuite X5 set-top box does not turn on are:

1. It may be that the set-top box is stuck or crashed when it is turned on, you can restart the set-top box to solve it, and it can generally return to normal after restarting.

2. If the restart is invalid for many times, it may be that there is a bug in the updated system that causes the set-top box to not be turned on, and this situation needs to contact the after-sales service of the set-top box to flash the complete system package into the set-top box to solve it.

3. It is also possible that after the upgrade, the hardware of the set-top box fails to turn on, such as the failure of the motherboard chip, internal circuit, other components, etc., which can also be solved by contacting the after-sales service of the set-top box for testing and maintenance.

You this is a system problem that can be solved. If you don't understand, you can ask Q 709853063

1. Connect the network cable from the router to the network port of the back panel of the set-top box, open the network settings of the set-top box, and automatically obtain the IP address, and then successfully connect to the network.

2. If the set-top box has a wireless network card, you can set up a wireless network, and the specific steps are as follows:

1) Press the "Menu" button of the remote control of the set-top box and find the "Settings" option;

2) Find [WLAN] in the settings menu and tap to enter.

3) Click the [Turn off] button in the upper right corner of the [Wi-Fi settings] page, and click to turn on [Wi-Fi].

4) Click to open the [WLAN Settings] setting page in the spring crack, there will be a lot of wireless network names, find the wireless network that you have closed and click to enter;

5) Enter the password of the wireless router, the general wireless password is 8 digits, if you don't know, touch the door, according to the ** provided behind the wireless router, log in to set up, you can open the wireless network, so that the set-top box is connected to the wireless network.

This doesn't need to be set up, just like you use a smartphone or tablet, and it's OK to connect to the wireless network.

Press the 0 button when you turn on the computer to enter the factory reset settings.

Di Meiu can watch it with special software, and you don't need to install ITV.