What is the error 4801 on the Canon printer

Error **6C10 is issued by the cleaning unit (commonly known as the "waste ink pump").

Inside the cleaning unit there are three fixed sensors that can be removed: one contact sensor and two photoresist sensors.

If there is an error **6c10, remove the three sensors, clean them with alcohol, and put them back for testing, and the result is: Yes, you can continue to use it. If not, then it proves that the three sensors have burned out and can only be replaced.

I've gone through all these methods, if it's even if it's cleaned with alcohol, it's not good, just replace it with a new one, and then you can use it normally.

Summary. Hello, we are glad to answer for you, the solutions to the Canon printer showing the printer error are as follows: 1. If the printer is in an error state, you need to set the printer as the default printer.

To do this, click Start, then find Devices & Printers, open the printer window, right-click the mouse, and set the printer as the default printer in the box that pops up. 2. The printer is in an error state, and it is also caused by the free space of the hard disk is too small

Delete some unused files on your computer, you can perform a disk cleanup. 3. The printer displays an error state, and the printer's driver is damaged, at this time, you can reinstall the driver, and then print. If the above methods still can't be solved, you need to find a professional master to repair <>

What to do if a printer error occurs when the Canon printer printer displays.

Hello. I just showed a paper jam when I was printing, and then I looked at it and didn't see any paper, so I turned it off, and now it shows what happened to the printer error.

Hello, we are glad to answer for you, the solutions to the Canon printer showing the printer error are as follows: 1. If the printer is in an error state, you need to set the printer as the default printer. Method:

Click Start, then find Devices & Printers, open the Printer window, right-click the mouse, and set the printer as the default printer in the box that pops up. 2. The printer is in an error state, and it is also caused by the small free space of the hard disk, and the solution is: delete some unused files in the computer, and you can perform disk cleanup.

3. The printer displays an error state, and the printer's driver is damaged, at this time, you can reinstall the driver, and then print. If the above methods still can't be solved, you need to find a professional master to repair <>

Summary. How to solve the problem of Canon printer 1687 A: Canon printer 1687:

It is the cartridge installation position that is incorrect. Workaround: Replace the cartridge.

Solution: Reinstall the cartridge and the printer did not put the paper correctly. Replace the ink tank with a new one.

Canon printer 1687 how to ungrind and fight A: Canon printer 1687: is the cartridge mounting bit trembling touch is incorrect.

Workaround: Replace the cartridge. Workaround:

Reinstall the cartridge and the printer does not put the paper properly. Replace the ink tank with a new one.

Is it to replace the cartridge.

Canon Printer Error**: Cartridge physical hardware failure. Workaround:

Reinstall the cartridge, if the fault persists, the cartridge may be defective, replace the cartridge with a new one: the cartridge cannot be distinguished. Workaround:

Installing a cartridge that can support this model : The remaining amount of ink cannot be detected. Workaround:

Replace the cartridge : The cartridge is installed in an incorrect position. Workaround:

Reinstall the cartridge. If the faulty ridge persists, the cartridge may be defective and a new cartridge needs to be replaced. 5. Eggplant stuffy 5200:

Error**This means that the temperature of the cartridge is abnormally high or too high. Workaround: Turn off the printer and let the printer stop working for five to ten minutes before starting it. Yes.

Dear Hello, glad to answer for you, there can be multiple reasons why Canon printer shows "Printer error occurred", here are some common solutions:1Check if the printer is connected properly:

Check that the printer is connected to your computer, that the cables are plugged in, and that the power supply is working. 2.Check that the printer's ink cartridge or ink is OK:

If the ink cartridge or ink of the printer is insufficient, it may cause errors in the printer. You can check if there is a problem with the cartridge or ink, and replace it in time when you need to replace it. 3.

Uninstall and reinstall the printer driver: There may be a problem with the printer driver and you will need to uninstall and reinstall it. You can find the printer driver on your computer, uninstall it, and reinstall it.

4.Clean the printer: If the printer has dust or dirt, it can cause errors in the printer.

The inside and outside of the printer can be cleaned using paper towels or cotton swabs. 5.Check if there is a problem with the print job:

If there is a problem with the print job, it can also cause errors on the printer. You can check whether the print job is wrong, or cancel the print job and print again. If none of the above methods can solve the problem, it is recommended that you contact Canon customer service or professional repairers for repair.

You can follow my steps to try it, and if you have any questions, you can give me feedback in time! I wish you a happy life and all the best.

Generally this situation is that the ink cartridge has no ink, the temperature is too high due to heating when the print head is working, only need to add a little ink in the ink cartridge, the two ink cartridges are easy to distinguish which is the problem, which is the lightest to add which, after adding ink, the problem is solved.

1. Press the Stop reset button first, and then press the power button to power on (don't let go).

2. While pressing the power button and not letting go, release the Stop Reset button, and then double-click the Stop Reset button.

3. Release the power supply and stop reset button at the same time, and enter the maintenance state at this time.

4. When the power light turns green, press Stop Reset, press 4 times to turn off the warning light, and then press the power button twice to get it.

1. Delete the print job.

2. Start the Settings Management Tools service, find the printspooler, double-click, and click Stop in the regular section.

3. Then click Start Run, enter spool, open the printers folder, delete all the things in it, and then click to start the printspooler printing service in the general tab.

4. Disconnect the printer from power for one minute, then connect and restart the computer.

Summary. The appearance of Canon all-in-one printer MG5780**B203 means that the printer is set incorrectly, and the printer can be reset again.

1. Right-click [My Computer] and click [Manage].

2. [Services and Applications], click [Services].

3. Find the [Print Spooler] item on the right side of the version, and right-click and select [Right to Stop].

4. Win+R open and run, enter [spool] to confirm.

5. Go back to [Service] and start [Print Spooler].

Canon MG7580 printer shows error**How do you get B203?

The appearance of Canon all-in-one printer MG5780**B203 means that the printer is set incorrectly, and the printer can be reset again.

1. Right-click [My Computer] and click [Manage].

2. [Services and Applications], click [Services].

3. Find the [Print Spooler] item on the right side of the version, and right-click and select [Right to Stop].

4. Win+R open and run, enter [spool] to confirm.

5. Go back to [Service] and start [Print Spooler].

Is it okay with a mobile phone.

This is done on a computer.