How to clean the cabinet after installation, how to clean the cabinet after installation?

Absorb the ashes and wipe them several times with a damp towel that wrings out the moisture.

Many people don't know that a lot of dust is generated when the cabinet countertop is installed, and this dust is very scary because it is pervasive and ubiquitous. At present, the mainstream countertop is quartz countertop, the main ingredient of this countertop is silica, that is, the raw material for making glass, so this countertop is very hard, the surface will not scratch, and it is also very environmentally friendly. However, it is also more expensive, and the thickness of the material on the market, I recommend that you choose the thickness, this thickness will not be too heavy, but it will not crack.

Generally speaking, the installation process of the countertop is very unacceptable, because it is a customized product, so the size will not be too accurate, and the Chinese people have higher requirements for the splicing seams, so in order to save costs, 99% of the countertop merchants will cut the countertops on the spot. Due to the properties of quartz countertops, a large amount of silica dust is generated. After the installation is completed, the installer can basically only see two eyes on his face, and his hair and face are dusty.

The owners are completely impossible to stay on site because they can't stand the dust. The key is that this dust is pervasive, in the installation countertop, your cabinet hardware and appliances have basically been installed, this dust will enter the hardware rail, so that you spend thousands of dollars to buy the hardware life halved, or even damage immediately. The dust will also enter your ** air conditioning and fresh air system, this consequence can be more serious than the destruction of a few hardware baskets, everyone makes up for their own brains, how much time does it take for air conditioning and fresh air to digest all these dusts?

If these dust makes the human body inhale too much, it will cause irreversible harm to the body, there is an occupational disease called pneumoconiosis, everyone is interested in their own down, this disease is not fatal, but it makes people lose the ability to work. These three points are the main and most serious hazards, and there are many details of the hazards, such as destroying the wallpaper and destroying the service life of the lamp.

Wait, I'm not going to do more. Therefore, I suggest that you must find a regular manufacturer to customize the countertop, and you must find a business that can do dust-free installation to install the countertop. If there is really no way, let the workers move the countertop to be cut outside.

That's how you can be safe.

I'm not talking about appalling here, if you don't believe me, you can see for yourself when you install the countertop!!

1.First, use a dry, soft cloth or vacuum cleaner to remove dust, dirt and other impurities from the surface of the cabinet.

2.Prepare a bucket of warm water, add a small amount of rubber water or soapy water, dip a damp cloth or sponge into the water, and gently wipe the surface of the cabinet.

3.For grease stains, stubborn stains and other stains that are difficult to remove, you can use a professional cabinet cleaner to spray on the surface of the cabinet, remember to use it according to the instructions.

4.To clean the inside of the cabinet, you can use a vacuum cleaner or a damp cloth that is carefully clean, and pay special attention to the corners and partitions.

5.After washing, wipe off the surface water stains with a clean, dry towel or paper towel to ensure that the surface of the cabinet is dry.

6.In ordinary use, keep the cabinet dry, do not litter with sundries, drinks, etc., to avoid causing pollution on the surface of the cabinet.

After the cabinet is installed, you can use a damp cloth to wipe and clean the surface, and if there are oil stains or stubborn stains, you can use a professional kitchen cleaner to clean them. It is recommended not to use chemical cleaners that are too strong to avoid damaging the cabinet surfaces or creating a hazard. Also, keep the inside of the cabinets and drawers clean and tidy by cleaning them regularly.

Wood cabinet cleaning method. The way to clean wooden cabinets is to clean them with a mixture of white vinegar and alcohol, and then add a few drops of dish soap. Use a microfiber cloth dampened with this cleaning mixture to wipe down the cabinets.

Next, rinse the cabinet thoroughly with warm water, and finally paint the surface with furniture oil containing beeswax. This way your cabinets will look brand new.

1. Cabinet assembly.

The L-shaped base cabinet extends from the right angle to both sides, while the U-shaped base cabinet first stacks the straight cabinet in the middle, and then stacks it from the two right angles to both sides to avoid gaps.

1) The kitchen floor should be cleaned before installing the base cabinet in order to accurately measure the ground level.

2) Do not use poor quality self-tapping nails for the connection between the cabinets, which will affect the connection and aesthetics of the cabinets.

City into the cupboard. 2. Hanging cabinet installation.

When installing the wall cabinet, the consumer can adjust the distance between the base cabinet and the wall cabinet to the foreman according to his own height, so as to facilitate future use.

1) In order to ensure the level of the expansion bolt, it is necessary to draw a horizontal line on the wall in advance, and the distance between the horizontal line and the countertop can be determined according to the height of the owner.

2) After the installation is completed, the levelness of the cabinet must be adjusted, which also directly affects the overall effect of the cabinet.

Euromonitor cabinets.

3. Disturb the installation of the countertop.

In order to reduce the error between the actual environment and the initial design of the cabinet after the kitchen decoration, the countertop is installed after the installation of the base cabinet and wall cabinet, which can improve the accuracy of the cabinet installation.

1) Professional glue should be used when the countertop is bonded, and in order to ensure the beauty of the countertop joints, the installer should use a grinding machine for grinding and polishing.

2) It takes half an hour to glue the countertop in summer and more than an hour in winter.

Euromonitor cabinets.

4. Stove appliances.

Generally speaking, the installation of embedded electrical appliances in the whole cabinet only needs to open the power hole on the spot, and when assembling the range hood and stove, it is necessary to pay attention to the smoking effect and whether there is air leakage in the gas source.

1) The distance between the range hood and the stove is generally between 750 and 800 mm, and it should be aligned with the stove left and right.

2) Whether it is a renovation worker or a natural gas company to send someone to connect, it is necessary to ensure that the gas connection will not leak.

Sunshine Hardware. 5. Hardware accessories.

The early installation of water basins, faucets, and pull baskets is the focus of determining the use of cabinets in the future. A professional hole punch should be used for sewer installation, and the opening part should be sealed with a sealing strip to prevent the edge of the wood from swelling and deformation due to water seepage, which will affect the service life of the cabinet.

1) When installing wall cabinets and countertops, wood chips can easily fall into the pull basket track, in order not to affect future use, it is recommended to cover the pull basket with covering.

2) The connection between the hose and the basin and the sewer should be sealed with glass glue to prevent water seepage.

Cabe Hardware. 6. Adjust the cabinet door.

Adjusting the cabinet door is an important step after the cabinet is installed, and consumers can make certain adjustments according to their actual situation on the premise of ensuring that the gap between the cabinet doors is even.

After the adjustment is completed, the garbage left in the installation process should be cleaned up in time to ensure that the kitchen environment is clean and tidy.

The kitchen cabinet installation process generally includes the following steps:

Preparation: Clean the kitchen, take protective measures for the Chang infiltration kitchen, hang the cloth and the kitchen wall to do a simple cleaning, and take the Naxun belt to accurately measure the ground level. Material entry: cabinet plates, etc.

Base cabinet installation: Before installation, the main business should check whether the plate of the cabinet is consistent with the reservation and whether it is shoddy. The edges of the cabinets are then edged with fireproof film.

Then install the upper feet at the bottom of the lower cabinet and adjust the cabinet according to the horizontal height of the ground. The L-shaped kitchen extends from the right angle to both sides, and the U-shaped kitchen first puts the straight cabinet in the middle neatly, and then stands on both sides from the two right angles, so as to avoid gaps. Once the cabinet frame is installed and positioned securely, the backplate needs to be installed on the back of the cabinet.

Generally, the installation of the water will be opened on the spot, the workers will use a professional hole punch according to the size of the pipe to punch the hole, the diameter of the hole should be 3-4 mm larger than the pipeline, and after the hole, the open part should be sealed with a sealing strip to prevent the edge of the water seepage wood deformation hole reed. Encapsulate the perforated backplate in turn according to the position of the cabinet. After the lower cabinet is basically installed firmly, the bottom plate of the countertop should be sealed to pad the countertop.

Wall cabinet installation: When installing wall cabinets, in order to ensure the level of expansion bolts, it is necessary to draw a horizontal line on the wall, and the distance between the horizontal line and the table is generally 650 mm. When installing the wall cabinet, it is also necessary to connect the cabinet with connectors to ensure that the connection is tight.

After the installation of the wall cabinet, the level of the wall cabinet must be adjusted, and the level of the wall cabinet will directly affect the aesthetics of the cabinet.

Countertop installation: At present, most of the cabinet countertops used by consumers are artificial stone or natural stone countertops. The stone countertop is made of several pieces of stone bonded, and the bonding time, the amount of glue used and the degree of polishing will affect the beauty of the countertop.

Generally, it takes half an hour to glue the countertop in summer and 1 hour in winter. When bonding, use professional glue for bonding and use a grinder for polishing.

Hardware installation: After completing the cabinet installation according to the above steps, the last process is to install hardware, including sinks, pull baskets, bowl baskets, hanging rods, etc.

Cabinet installation is recommended Luban to home.

If you want to make the cabinet installation process smooth and want to avoid unnecessary hassles, here are some cabinet installation processes and precautions:

1.Drawing confirmation: Before installing the cabinet, make sure that the fittings and dimensions of the cabinet are correct, and confirm whether the drawings match the situation on site.

2.Arrange the site: Before installing the cabinets, it is necessary to clean up the site and keep the safety of people and items.

4.Install the countertop: Before installing the cabinet, place the reserved countertop on the base cabinet and carefully measure whether it matches the base cabinet to ensure the stability of the countertop.

5.Wall cabinet installation: After the countertop is installed and stabilized, start to install the wall cabinet, install it according to the drawings, pay attention to the size matching and the stability of the wall.

6.Base cabinet installation: When installing the base cabinet, first put the feet of the base cabinet flat, and then place the base cabinet on the countertop, carefully check each angle and the height of the base cabinet.

7.Adjust the cabinets: After the installation is completed, the cabinets also need to be adjusted, such as leveling, adjusting the door leaves, etc.

Notes:1When installing cabinets, it is necessary to ensure safety, such as using seat belts for installation at heights, and wearing protective glasses when using power tools.

2.When installing cabinets, it is important to follow the manufacturer's instructions and installation process.

3.Measure the dimensions carefully during the installation of the cabinet to avoid unnecessary problems.

4.When adjusting, dismantling, or replacing cabinets, be sure to keep your surroundings clean and tidy to avoid affecting use.

In short, the quality of the cabinet and the quality of the installation directly affect the use effect and service life, so it is necessary to be very careful when installing.

Cabinets belong to the necessary furniture for home life. Installing cabinets can make our lives more convenient, and there are two kinds of cabinet making in the home renovation process: one is factory customization, and the other is carpentry customization.

But the installation steps between the two are the same, and there are many problems to pay attention to in the overall cabinet installation process, and there are many factors to consider. The following shares the cabinet installation steps, it is too late to regret the wrong installation, hurry up and learn it.

Cabinet installation is a big event in home decoration, and there are many details to pay attention to, such as the location of water and electricity, the installation location of switches and sockets, the installation of gas pipes, and so on. Now let's hurry up together!

1.Hydropower arrangements.

The socket and other points are as consistent as possible. Don't have too many height gauge inches.

The size of the wall is as large as possible to facilitate embedded measurements.

The dimensions should be as close to the fixed wall as possible. Do not use on faces where the actual size of the tube well has changed.

It is difficult to add instructions to the logo with text clear identification, and in the case of special brands of special electrical appliances, it is necessary to study before the layout of water and electricity.

2. Water and water layout.

Water Angle Valve: The center is located in the sink cabinet, the distance between the hot and cold water angle valves is 150, and the height is 600.

Sewer pipe: The ground drain position is located in the middle of the angle valve for hot and cold water. Wall drainage requires that the outlet pipe height should not exceed 300 and be buried in the wall as much as possible.

Dishwasher or washing machine water and water and sockets are kept in the Let Simple Sink cabinet, located close to the side panel of the appliance cabinet body into 150, the same height as the water drain slot, water and water. The device placement location must be buried.

Refrigerators with ice-making function need to be set higher than 600 near the refrigerator. of water washing.

The upper and lower water on the island is placed in the middle island sink, 200 meters away from the back panel of the sink cabinet.

Cabinet installation precautions

1.When the infrastructure of the home improvement kitchen is completed, you can start installing the cabinets. But before installation, you need to clean the kitchen to avoid secondary moves and decorations, and waste unnecessary time and effort.

2.When preparing for cabinet installation, you should complete the installation of home light fixtures and lampshades to avoid dust. Cleaning is done in the back cabinets.

3. When performing cabinet installation, pay attention to the use of cabinet equipment, some equipment can be installed if needed. Together with the cupboard.

4. The installation of the above cabinet is generally to install the range hood and then the stove.

5.Once you have completed the above steps, you can adjust the door to ensure that the door clearance is even, horizontal and vertical. After adjusting the cabinet doors, the staff should clean up the trash left behind when installing the cabinets to ensure that the owner's kitchen is clean. And then.