The love machine can t start, and the love machine can t start hardware failure .

In this case, the hard drive is usually broken.

Remove the hard drive and put it on another machine to see if it can be read. Back up your important files at the same time.

Remove it again, fdisk mbr and try it.

If not, use DM to see if it can be partitioned.

In my experience, the hard drive is broken. It is recommended to buy a tool disk to rebuild the partition before formatting. If it doesn't work to reinstall the system, use the tool disk to clear the disk and then install it. If you can't do it, you'll have to change the hard drive.

It should be a problem with the hard disk, use the hard disk detection tool to see if there is any error, yesterday I installed a friend and encountered the situation you described, re-establish the partition, and then format it!

It may be that the hard disk is broken, find someone who understands to help you see, whether it is a low grade or to change it.

Boot and press delete to turn off the hard disk boot inside

Try pressing F8 to enter safe mode while on. Then reinstall it.

Look at the capacitors on the main version If not, you should take it directly to the computer city and let them check it, the situation you said is that both are possible, but it is generally a power supply problem.

The large electrolytic capacitor in the power supply takes a long time, and the electrolyte is dry, causing the output to be unstable, so it will be like this, just change it, if it is I, I will turn on the power supply and change the capacitor, as long as a few dollars to buy the capacitor.

Then you're going to kick a few more times, hehe.

This computer is a high-end computer; foot control; Hehe.

First use a brush to clean up the dust on the motherboard, and then see if there is a problem with the power jumper on the motherboard, (pull out the jumper, use a screwdriver short circuit to turn on, it must be the two short power supplies), if it doesn't work, change the power supply to try, and then see if there is a shaking capacitor or ** circuit on the motherboard, and if there is, go to repair the motherboard.

The chip is broken, go fix it! Your situation is the most likely to make the chip break! Or a few are in the virus pulled. From the loading and unloading system.

Are you saying that settings in CMOS cannot be modified? Try to change other settings to see if you can change it, if it doesn't work, then load a factory setting, if it doesn't work, then try to find a machine with the same motherboard, modify it according to your machine's CMOS settings, use a tool to read out the CMOS data, and then write it to your machine's motherboard CMOS.

Changed to forgot to save it after booting from the hard drive?

Hello,I've also encountered the same or similar problems as you.,The problem of the system is not determined to be in**,Many friends also come here to ask similar questions,Such as stickers、Know、Space、Web page、Encyclopedia、Library、Login and other issues,,, the most reflected in the paste bar and know,Anyway, there is not a problem here or there is a problem,In short, there are strange things here,,The classification of attention in my personal center is like this,,, the classification of concern: 镞犲垎�aya ,,After opening, it is all the problem。

The situation is like this,You don't have to worry,It may be that the system is busy or network speed problems,Refresh a few times to try it,Clean up the cache,Or try again in a different time period,,The previous Yinchang period,When I asked questions,The following situation always occurs,,I'm sorry,Your submission process has an abnormal error o o,,, and you want to verify the code,,For a while, many friends said that it was a ...... of convulsionsIt's really non-negotiable, it's normal for the system to be abnormal, and more can only be helpless.

Recently, I have encountered a reminder that violates the rules, or is not standardized, and is only visible to myself for the time being, and sometimes the key points are submitted many times. . . There are also more than a dozen refreshes on the page that knows the classification of the problem, and the page is still an hour ago, and the question cannot be asked,,, and there is no direct login on it for several weeks, only from hao123 with QQ or Sina account login.

In short, there are a lot of problems here at the moment... Since the beginning of this year, the system has not been stable, and often convulsions, the expectations can not be too high, and the same must have a high tolerance for problems, and the problems can only be solved by themselves, and no one can replace them.

Customer Service Center.

It is the randomness of the power supply that does not transmit PG signals, so it is recommended to replace the power supply and try again.

There won't be this problem in summer, the temperature of the chassis is too low, hehe;

It's not good if the temperature is too high, and it's even worse if the humidity is too high;

If you're trying to plug and unplug the memory and graphics card, it's possible that they're loose! ～～

Are you a win2000 system? If not, then put msconfig in the runtime, and then remove the tick from the boot bar for everything that you don't want to boot up.

Do you have antivirus software installed? Uninstall the anti-virus software! Is antivirus software upside down? Turned the auto-up and off of XP. The network cable is unplugged.

If it's still slow, let's reinstall the system.

There are too many things in the system disk.,Reinstall it.,And then make the division of the system disk larger.,There's also a possibility that it's a virus in your computer.。

The easiest way to reinstall the system is to reinstall it. (By the way, don't forget to make a backup of useful things when you are in the system).

Since you're still slow with Optimizer, it's definitely not a startup problem, and that's probably the case.

1. Poisoned, especially Trojans, it is recommended to use the latest antivirus software to scan comprehensively, I use Kaspersky, the anti-virus effect is obvious.

2. Is your system disk space insufficient? If so, delete some programs to free up space on the system disk.

3. If you suspect a malicious plug-in, it is recommended to use Super Rabbit, and use the one-click cleaning and IE repair function inside.

No, just press the reset key and you're good to go.

Look at this situation, it should be your machine's battery hanging, you can go to the computer city or something, there is a battery replacement, you can go to see it, it's not expensive, I wish your love function is safe, hehe, may it be smooth.

There is a hole in the lower left corner, just find a needle and poke it.

This is a crash phenomenon.

There is no display after powering on, it is possible that (1) the CPU is broken. (2) The BIOS chip is broken. (3) The motherboard is broken. (4) You can hear and see the hard disk working, saying that there is obviously a problem with the card.

If you can find a computer test card, give it a test.

If the memory module is not plugged in properly, the machine must have been turned upside down, or the graphics card is not plugged in properly, it is recommended to plug it in again.

This problem is that you have installed the online real-name of 3721 on your machine, and the software is corrupted or the file in the software directory is incomplete or does not exist, but the loading of 3721 still exists in the boot project of the system, which causes you to prompt a file that cannot be found every time you boot it.

The solution is to clear the load from the system startup items through the boot acceleration of the "Optimization Master" or the 3721 assistant.

Just go to the registry and look it up.

Click Start->Run->regedit

Find the next one with F3.

Then see the same item as prompted.,Check--right-click--DeleteRestart the computer must be good.。。。

The reason for this is that you may have installed some software in the registry and there was a conflict with the information in the registry