Broadband automatically sends and receives large amounts of data as soon as it is connected, and dro

According to what you said, other people's machines can be used by you.

There is a problem with the network card of the computer.

Replace the NIC driver and try it out.

If it doesn't work, change the fast network card.

It's obviously poisoned, my computer used to be like this, and I looked for Netcom to show me and said no problem, and then I installed Kaba and found out a bunch of viruses and malicious plug-ins, I suggest you don't use Rising Even if it's domestic, but the technology doesn't work.。。。 You can use Kaba to call Netcom if you can't play it anymore.

Summary. 1. Circuit problems First check the wiring at home to see if the connections in the house are connected, and whether the wiring has passed through any interference sources, such as air conditioners, refrigerators, TVs, etc., and try to keep a certain distance from these electrical equipment. You can also replace the indoor line with a network cable with stronger anti-interference ability.

Make sure the lines are connected correctly. 2. Network card problem Network card is generally PCI network card or onboard network card, and the quality must be selected when choosing the right one, otherwise it may cause poor Internet quality. 3. ADSL modem or network card setting problem Now modem generally has two working modes, one is the normal mode of using dialing software, and the other is the routing mode of automatic dialing.

What's the deal with the frequent drops of broadband Drop once in a few minutes, and then automatically connect again after a few minutes.

1. Line problems First check the wiring at home to see if the connections in the house are connected, and whether the wiring has passed through any interference sources before, such as air conditioners, refrigerators, TVs, etc., and try to keep a certain distance from these electrical equipment. You can also replace the indoor line with a network cable with stronger anti-interference ability. Make sure the lines are connected correctly.

2. Network card problem Network card is generally PCI network card or onboard network card, and the quality must be selected when choosing the ruler, otherwise it may cause poor Internet quality. 3. ADSL modem or network card setting problem Now modem generally has two working modes, one is the normal mode of using dialing software, and the other is the routing mode of automatic dialing.

I'm sorry I don't understand, but can you elaborate on that?

3. ADSL modem or network card setting problem Now modem generally has two working modes, one is the normal mode of using dialing software, and the other is the routing mode of automatic comma dialing.

It must be a problem with broadband lines, including network cable crystal heads, cats, home cables, community computer room connectors, and service provider network equipment.

If the cable is fine, poor contact with the external line is also common, such as the network port connection is not real, the crystal head connection is false, etc.

In this case, they can only find a service provider, which is their responsibility. Engineers should be able to test in sections to find fault points.

If it doesn't work, you can complain to multiple parties, and Telecom 10000 can report the fault and complain.

The local communications authority is the industry director of telecommunications, and there is a special complaints department, which is very effective.

Let's start with the big picture. How about you look at the telecommunications network next door? If they're good, that's your thing.

You just check it, change everything once, what network cable, cat, change! Don't bother, it's important to find out why! There may also be a problem with the telecom operator, the network he provides to you may be unstable, or the signal from the distributor is too weak, or the port is aging and poorly contacted.

Contact for an all-round investigation! Find a professional and responsible master!

There may be a problem with the telecom background.

I also often do. Now that's how it is with telecommunications. It's always 691, right?

Sometimes you can connect after a few minutes of continuous clicking.

Mine is the same way, the method said on the first floor has been tried, why is it still broken and connected, and it is urgent to solve it.

I've had this problem lately, how did you solve this problem last time?

Summary. Hello.

If the broadband is in arrears or expires, you need to pay or renew it in a timely manner. If the device is used for a long time, you can turn off the power of the optical modem, router, computer and other Internet access devices for a few seconds, and then turn on the power supply and restart. If it is still not resolved, it is recommended to contact the local customer service staff to report for repair.

The local connection is already connected, and the broadband connection is disconnected in a few seconds.

Hello broadband is in arrears or due, and you need to pay or renew it in time. If the device is used for a long time, you can turn off the power of the optical modem, router, computer and other Internet access devices for a few seconds, and then turn on the power supply and restart. If it is still not resolved, it is recommended to contact the local customer service staff to report for repair.

This phenomenon is caused by three reasons: First, the responsibility of the operator (transmission and switching network failure).

Operators must ensure that the signal quality to the user (bandwidth, bit error rate, signal-to-noise ratio, transmission rate, signal level, input and output impedance, signal stability, input and output impedance stability) in line with national standards); Specific**: Telecom 10000 Netcom 10060 Tietong 10050 Two: ** Problem:

**Low level of operation and maintenance quality; Failure to troubleshoot in a timely manner; For example, if the other is very good, and a certain one is particularly bad, this is the problem of the company itself, and it has nothing to do with the operator or the user.

Try the following: Left-click the "Network Links" button in the taskbar in the lower right corner of your desktop. Select Open Network and Sharing Center. Select Change adapter settings.

Select Local Connections, right-click, and select Enable. When the message "Enabled" is displayed, the network is successfully connected.

Watson Secure WiFi recommends the following steps to troubleshoot:

1. Ask the broadband operator to check whether the broadband line and cat have hardware faults;

2. Reset the WiFi router to the factory state and reconfigure it (if it is PPPoE dial-up Internet access, it is recommended to prepare the PPPoE dial-up username and password before resetting).

3. If the above methods fail to solve the fault, there may be a hardware fault in the WiFi router, and it is recommended to replace it.