-
Such details of things careless people often forget, and it is not very short to be corrected. Let's think differently, don't go the other way to the dark, there's no need. You can use more uncorked ones, or mark on the bottle: cap stopper, etc.
-
Place the bottle in a place where you can always see it, so that you should be able to reach out and tighten the cap when you see it.
-
Set reminders on your phone... We remind on time every day. It's good if it's been a long time.
-
Buy a cup. Let your girlfriend buy it for you, buy it and give it to you, and you won't forget.
-
Put a label where the bottle is placed as a reminder.
-
Then you can drink it all at once, so you don't have to worry.
-
Buy an automatic one and you won't be afraid to forget!
-
Set an alarm clock 、、、 keep reminding yourself to close it.
-
Write a reminder sticker on the bottle.
-
Replace the bottle with no cork.
-
Drink it all at once, so you don't have to worry about it.
-
My girlfriend used to have this habit, drinking water to open the lid, if there was a table next to her she wouldn't cover the lid, unless it was in the car, otherwise she didn't cover it every time, I saw it once and taught her once, and then I didn't seem to see this situation later.
-
Hold the cork at the mouth of the bottle.
-
You can leave it uncovered in the future.
-
You can see that you are a bit sloppy and don't pay enough attention to details.
-
Lighter lighter is one of the commonly used bottle opening tools, with a lighter can also open the beer bottle, that is, use the bottom of the lighter to press the beer bottle cap, and then break it hard, you can open it.
Pair the bottles that touch each other.
If the technique is good, you can put the two bottles head to head, cap to cap together, one up, one down, and then both are clamped tightly, pull hard, you can open the beer bottle cap, everyone can try.
Sharp teeth.
Many people usually choose to bite it open with their teeth when they don't have a keiko at hand. Remember, when biting, never have front front teeth, and try to bite the bottle cap to the back teeth, so as not to hurt your teeth. When biting, don't bite hard, and when you can't bite open, you can change the angle of the bottle and bite again.
The newspaper is simply processed and the cap can be opened. The newspaper is folded repeatedly into thin strips and then folded in half to create a stiff corner. Using this angle, the cap is lifted by means of a lever.
If it is difficult to pry open the entire cap at one point, you can pry around the cap in multiple places until it is successful.
After reading the above introduction, how to open beer without a corkscrew? In addition to the above methods of opening the cap of beer bottles, there are also tables, stools, chopsticks, and in the absence of a bottle opener, you can find a temporary tool instead, using the principle of a crowbar to open a beer bottle. Snap the tool under the mouth of the bottle with one hand, jam it and pry upwards until the beer cap is opened.
-
Take a sample, add a sufficient amount of dilute hydrochloric acid, if there are bubbles produced, it has deteriorated.
Take a sample, add an appropriate amount of water to dissolve, add calcium chloride solution, if a white precipitate is produced, it has deteriorated.
In addition, calcium hydroxide solution can also be used.
-
Take a sample and add dilute hydrochloric acid dropwise, if bubbles occur, it means that it has deteriorated.
Sodium hydroxide deteriorates to form sodium carbonate, which produces carbon dioxide gas when exposed to acid.
Or add calcium hydroxide, barium hydroxide or barium chloride to produce a white precipitate, indicating that it has deteriorated.
-
Yes, it's at home, not on the side of the road.
-
If you're very, very, very not bad for money, just throw it away, or you can continue to use it
-
What is dried is only water, mixed with a little cool, and then stirred, it will not affect the use.
-
Stir with a toothpick to mix the dry and wet ones well, and the effect will not change.
-
1: Don't use brute force, slowly rotate the edge of the cork against the mouth of the bottle and stuff it into the mouth with a little pressure. Plug 3 5 will do. When the wine is served, the cork should be submerged.
2: There are also red wine corks sold in the market. If you drink red wine regularly, you can buy one.
-
It's very simple, plug the cork upside down, and generally the cork is small at the top and large at the bottom.
-
Cut off the end of the stopper a little, and then slowly press it in, it is impossible to level it all out and stuff it in, basically to the end of the bottle will not leak, and it will be stored in the refrigerator for a longer time.
-
Rotate it little by little with pliers.
-
1. Methods to increase friction: many times when we feel that the hand is slippery when screwing the cap, we can use a piece of cloth to cover the cap, or wear rubber gloves to screw the cap.
2. Bottom beating method: put the mouth of the bottle facing downward, showing a 45-degree inclination, and then pat the bottom of the bottle with the other hand, the purpose is to break the vacuum state in the bottle. Pay attention to the strength and don't smash the bottle and hurt your hands.
3. Heating method: pour hot water into another container, turn the end of the bottle with a lid upside down in the hot water, take out the bottle and wipe it dry after a while, and then open the cap.
4. If we don't have hot water, we can use an electric hair dryer to heat the position of the bottle cap, and then unscrew the bottle cap.
5. We can also use a spoon and other iron tools to gently pry the cap and the pores of the bottle body to let air into the bottle, and then we can unscrew the cap.
-
1. Capping device.
Method: Select the appropriate type of capper according to the size of the cap, and put the serrated part on the cap. Just turn it by hand.
Note: With this gadget, the cap is easier to open because the rubber increases friction. In the same way, if the rubber gloves used to wash dishes at home are used to open the bottle after wearing, they are just as easy to use.
2. Pry the bottle cap with a spoon.
Principle: Some large spice bottles are not easy to open even with a bottle opener, which requires a little external force.
Method: Use a stainless steel spoon to pry the edge of the cap, and when you pry it open, gas will enter and the bottle can be opened easily.
3. Soak in hot water.
If you come across a bottle that is difficult to pry with a spoon, try pouring boiling water into a bowl, soaking the bottle for a few seconds, and then twisting it open. Usually, the bottle will be easily opened after the principle of thermal expansion.
4. Pad things.
You can put on the thing and then twist the cap hard, because after the thing is padded, the coefficient of friction increases, and with the same force, the force acting on the cap will increase, so it may open.
5. Turn it upside down.
You can also turn the bottle upside down and pat the bottom of the bottle hard, which can also reduce the pressure inside the bottle and may open the cap.
-
There are five main steps to open the cap:
Buy your favorite cans, beverages, etc. in glass bottles. Of course, it is for those glass bottles with metal caps.
Find a relatively stable, hard, and stressable place, such as a vegetable counter, step or corner of the ground, and avoid overhead positions to prevent damage to tiles, etc.
Hold the glass bottle upside down so that the glass cap can touch the floor or countertop. Hold the glass bottle firmly and tap the cap lightly to let air in, depending on the strength you have mastered.
After tapping the cap, the surface of the bottle will lose a little bit of paint. If you open the cap often, master the strength, tap lightly, and it can be in place.
Rotate the cap counterclockwise by hand, and with a little force, you can hear a "bang" sound of opening the cap, and the cap will be opened. Be careful not to go near our clothes when unscrewing the cap, so that the juice inside the bottle does not splash on our clothes.
-
This one is very simple, just break the vacuum in the bottle. All you need to do is take a clean knife and prick the cap on the cap, and the cap can be easily unscrewed (be sure to be safe!). In such cases, it is advisable to drink it as soon as possible.
-
What should I do if the cap can't be opened? How to open the bottle cap Three tricks allow you to easily unscrew the bottle cap, the first step is to take out the bottle, the second step is to take out the brick, and the third step is to smash. Can.
-
Take the bottle upside down, pat the bottom of the bottle with your hand, and then you can unscrew the cap!
-
The rubber band can be easily unscrewed by placing the rubber band on the cap.
-
Take a sharp object and puncture the cap of the bottle, and solve it in seconds.
-
Put the bottle in hot water. It's easy to unscrew after a few minutes... Or.. You find someone with a lot of strength ...
-
Heat it up, or wrap the cap in a dry towel. Be careful to turn counterclockwise.
-
Use a kitchen knife to pry around the edges, and then twist it to open.
You can use the time control switch to set the shutdown time according to the duration of the switch, and it will automatically turn off when the set time is reached.
If you forget your password, you'll have to set it up again before you can log in again. >>>More
If you forget the service password of the mobile phone number, also known as the initial password, you can reset a new password through the following two ways: >>>More
Some newborns often choke on milk when they drink milk, this situation is also more dangerous, and it is easy for children to have some suffocation, so parents try not to let them drink too anxious when feeding their children breast milk, do not wait for the child to be hungry before thinking about feeding the child, it is best to feed the child at a fixed time point every day, this situation will not let the child drink too much, and will not make the child hungry too anxious. >>>More
The folder sniffer can be scanned out, you didn't find the right location, the file is stored in a special folder in the **station, as shown below, if there is a problem, hi contact.