How to configure the router for ZTE ZTE with the wireless router

Hello, the router is more troublesome to set up,And it's not convenient to manage the number of connections,Sometimes others rub the network and don't know how to delete each other,It is recommended to buy a portable wifi,For example, like the recently popular Tencent national wifi can manage wireless connected devices,I don't know the connection,You can block it yourself,Prevent rubbing the network, etc.,It is said that this Tencent national wifi can also support scanning *** login wifi,It feels good, You can also check out their official website to find out.

You can copy the ones in parentheses.

The default password of ZTE ZTE router can be found as follows:

1. Open the browser --- enter the general router address is this or check the login information on the back of the router) Enter the router--- enter the user name and password, (the default is generally admin).

2. The address and password of the router are on the back of the router.

1. First, open the browser and enter your router gateway address.

2. Then enter the password on the pop-up router login page.

3. Enter the home page of the router, click the "OK" button to enter the wizard interface after passing the verification, and click the "IP Bandwidth Control" link on the left.

4. Then in the "IP Bandwidth Control" on the right, first check the "Enable IP Bandwidth Control" checkbox, and then select the network type and set the network bandwidth.

5. After the setting is completed, click the "Save" button to display the "Saving configuration" message, prompting the setting of the saved network speed after disappearing.

Here's how to do it: The first step is to open a browser and enter the IP address of the router gateway in the address bar (there is a label on the back of the router, generally, enter the login username and password (generally admin);

The second step is to display the running status after successful login, click "Wireless Settings";

The third step, click "Wireless Security Settings", the wireless network name (SSID) is a name, you can fill in at will, generally letters + numbers;

Step 4; Then set the password, generally choose the WPA-PSK WPA2-PSK encryption method (the password should be 8-16, you can combine letters and numbers);

Step 5: After setting the password, click Save to prompt restart;

Step 6: Click "Restart Router" in "System Tools" to restart the router.

How to connect a ZTE mobile phone to a wireless network:

The first step is to open the main page of the phone and click Settings;

Step 2: Click Turn on Wi-Fi and <>

Step 3: Turn on the wireless network, enter the password, and click to connect.

1. You need to know the IP address of the router before using it, and win+r to open the running window. Enter cmd.

2. Enter ipconfig to display the network information, where the gateway address is the IP of the router.

3. Open the browser and enter the router IP, enter the login interface, and enter the administrator password.

4. Successfully log in to the router management background and click to enter the "Router Settings".

5. Click "Change Administrator Password" in the menu.

6. Enter the old password once, enter the new password twice, click "Save", and the password of the router will be modified.

Open the Internet Explorer program, enter " in the address bar, press enter to confirm, you will see the login interface as shown in the figure below, enter the username and password in the login dialog box, and click the "OK" button.

If the name and password are correct, the browser displays the administrator mode screen.

If you are not sure about your Internet access type, please select Let the router automatically select the Internet access method, the router will automatically determine your Internet access type, and then jump to the settings page of the corresponding Internet access method. To ensure that your router can accurately determine the type of internet access you have, make sure that your router is properly connected. In this example, the PPPoE Internet access method used by general home broadband users is demonstrated, and the following screen appears after clicking "Next".

Fill in the broadband username and password provided to us by your ISP.

After clicking "Next", the wireless setup interface will appear.

After clicking Next, the setup wizard completion screen appears. Click "Restart" to complete the router setup.

After the restart is completed, click "Running Status" on the left menu as shown in the figure below to view the WAN port status, if the IP address is displayed as "Non", it means that our router has been connected to the Internet, and the WAN port traffic shows the number of packets received and sent by the current router. At this point, our router setup is complete.

First log in to the router (enter or in the address sample, and then enter Wireless Management, Wireless Security Management, and you can modify the settings.

Go to the router on your computer, delete the original password, and set a new password.

You can go back to the factory settings and then log in to the router settings.

If it's the default, you look behind your route to see if it's written on the router shell.

First of all, it is included in the router, the account password is in the back of the router, you can see it when you go in, and you can save it after modification.

Take a look at the address behind the route, usually for or open it in a browser.

Then log in. The login account route is followed by ,

1. First, open the browser and enter your router gateway address.

2. Then on the pop-up router login page, enter the account password.

3. Enter the home page of the router, click the "OK" button to enter the wizard interface after passing the verification, and click the "IP Bandwidth Control" link on the left.

4. Then in the "IP Bandwidth Control" on the right, first check the "Enable IP Bandwidth Control" checkbox, and then select the network type and set the network bandwidth.

5. After the setting is completed, click the "Save" button to display the "Saving configuration" message, prompting the setting of the saved network speed after disappearing.

How to set up a router at home to limit the speed of the Internet:

2. Enter the correct username and password to enter the router management background.

3. We need to check the existing IP and the corresponding MAC address bar first. Click "DHCP Server" on the left, select "Client List", and write down the corresponding IP and MAC addresses displayed on the right.

5. Enter the correct corresponding MAC and IP address on the right, then select "Status" as "Effective", and then click the "Save" button to save.

6. Repeat the previous two steps until all IPs are added.

7. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and select the correct network speed below.

8. Fill in the IP and bandwidth size to be controlled in the following rules, and also set your own computer "Guarantee minimum bandwidth", and select "Enable" for all.

9. Click the "Save" button to save all the settings.

ZTE router settings.

Here's how to set up a wireless router:

1. Enter the router address, connect the wireless router, enter the address you see on the router in the browser, generally of course, if your home is using ** online network, then you need to prepare an additional modem, commonly known as "cat").

2. Enter the corresponding account password, and after entering, you will see that you have entered the corresponding account and password.

3. Select the Setup Wizard, and then enter the operation interface, you will see a Setup Wizard on the left, and enter (generally pop up automatically).

4. Enter the Internet mode setting and set the interface of the wizard.

5. Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

6. Enter the account password, select PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number to open broadband, fill it in OK.

7. Set the password of the router, and then enter the wireless settings after the next step, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill it in casually, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

8. The next step is to set it up successfully.

9. Click Done, the router will automatically restart, at this time you should wait patiently. The interface that appears after success.

10. How to connect the mobile phone to wifi is simpler, when your router is set up, click the menu key of the mobile phone, and then enter the mobile phone settings, the first item is wifi, and then you set it to on, click to enter the wifi list, and select the wireless network name set in your previous router. Enter the password you set earlier to connect.

Summary: How to use a wireless router, is a more common problem, but also a relatively simple problem, I believe that as long as you have an experience, you can also become a god, of course, the router settings are far from these simple content, there are more setting options after logging in to the router settings page, set other options, such as binding MAC address, over IP, firewall settings, etc., can make your wireless network more secure, to prevent being rubbed off the network.

Do you mean to control the network speed?,I don't know the specific model of your route.,I don't know if there's this function.,There's an IP bandwidth control in it.,It's to control the network speed.,I don't know if you have it.。

I'm dizzy, D-Link is its own brand, ZTE is also a separate brand, two can't be together, the specific model with a mother and a number.

It seems that there is no such function in the settings, so it is recommended to use software to set the intra-network bandwidth.

After entering the main interface of ZTE router, set the Shangzi Tong network mode to automatic, and set the wireless name to drink the wireless password, and the specific operation steps of Zao Qibi are as follows:

Tools Raw material concealment:

HP 24-dp030

windows10

Browser 1: Log in to the router.

After opening the browser, enter the router address to enter the ZTE router, enter the password and click to log in.

2. Set up the Internet mode.

Click to enter the expert mode, enter the network configuration option, and set the Internet access mode to automatic.

3. Set up wirelessly.

Click on the wireless settings and enter the wireless name, select the safe mode and enter the wireless password.