Tengda router wireless network disconnection problem.

With the popularization and application of the network, the router has been widely used as an important network interconnection equipment in network construction, so do you know what to do if the Tengda wireless router is off the network? The following is some relevant information about the disconnection of Tengda wireless router for your reference.

The situation of Tengda wireless router is disconnected.

1: The wireless connection is often dropped, and it is interrupted and there is no time.

2: The network is often restricted.

3: There will be a network for a while, and there will be no network for a while.

The solution to the disconnection of Tengda wireless router.

Open a browser and enter the router management address. Log in to your router.

Enter the router management password to log in to the router.

Click "Advanced Settings" on the router settings home page to enter the router advanced settings page.

In the navigation menu, select Wireless Settings

Modify the name of the wireless SSID.

Network mode, select the most compatible mode.

Modify the channel, change the channel, change the channel to 1 or 6 or 11 channels for the most stable.

Turn off AP isolation mode, and use the default settings for others.

Modify the wireless encryption mode to the most compatible mode.

Pay attention to the wireless signal strength, a weak signal will also cause the wireless to be disconnected for a while.

Condition wireless connection information, reconnect.

1.What are the steps to restart Tengda wireless router.

2.How to solve the situation that the Internet connection of Tengda wireless router is dropped3What should I do if the Tengda wireless router upgrade fails?

4.How to solve the problem that the Tengda wireless router cannot access the Internet.

5.What should I do if I can't access the Internet after the Tengda wireless router is set up.

(You can click on the problem type or view the troubleshooting solution by number) 1. Wireless disconnection problem type:

Wi-Fi disconnected, wired connection is working normally, restarting the router is effective Wi-Fi disconnected, wired connection is working normally, restarting the router is invalid Wi-Fi is disconnected, wired Internet is also disconnected

2. Wired disconnection problem type:

After the wired network is disconnected, the wireless Internet access is normal, and you can't log in to the router interface After the wired network is disconnected, the wireless network can't be connected to the network, and you can't log in to the router interface Some devices are disconnected from the Internet, and you can log in to the router settings interface normally after the disconnection All devices are disconnected from the Internet, and you can log in to the router setting interface normally after being disconnected 3. Special disconnection problem type:

When the router is connected to a device or network cable, it will be disconnected, and it will return to normal after unplugging

Cause 1: The network line is faulty.

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Cause 2: The router has an incorrect Internet setting and you need to reconfigure the router.

Solution: Reset the router and set dialing again.

Reset Router Method:

Method 1: There is a button [RESET] button on the back of the router, press and hold for 5 seconds, and the indicator light on the router panel will be off and then on, which means that the settings have been reset.

Set up router dialing:

The IP and DNS settings of the computer are automatically obtained.

1. Open the browser - enter the general router address is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save.

3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Reason 3: Router hardware is damaged.

Workaround: Replace the router with a new one.

If you don't answer the route first, connect to the Internet with a dial-up number first, try to see if the network is often disconnected. See if it's an external line problem or a router problem. If the stand-alone dial-up Internet access is normal.

That could be because your router is unstable. If the stand-alone dial-up connection to the Internet is also disconnected, it may be a problem with the cat, or the external line contact is not good, or the port problem in the computer room. Stand-alone dialing is also disconnected, and it is recommended that you call customer service to report fault maintenance.

If your router cannot connect to the Internet, please log in to the router interface, click "Advanced Settings" - "System Status" to check the connection status of the WAN port connection, please check the following troubleshooting methods according to your WAN connection status:

The WAN port displays the solution to the failure of the connection.

Problem 2: The WAN port displays the solution to the fault in the connection.

Question 1: The WAN port is connected but cannot be connected to the network: Fault solution 3

Set up the router again