Set up a wireless router on your phone, but you still can t access the Internet

This should be the virtual signal of your router, it is not easy to use, you factory reset the router and change it again.

If you are troublesome, you can use the same portable wifi as me.

It is different from other portable wifi of the same type, it absorbs all the advantages.

First of all, it is self-driven to quickly create a strong signal, and then it is to scan *** to log in without a password.

There is also a gift package for this wifi game!

Look! Thank you!

Generally, you need to apply to the network operator, ask them to refresh the data, and tell them to install the router. Many telecom operators theoretically do not allow routers to be used. However, playing ** can solve the problem. Then configure the router the right way.

Can't get on the desktop either? This indicates that there is still a problem with the WAN settings of the router.

There is a problem with the router settings.

It may be that there is a problem with the setting of your phone to connect to the wireless router.

Mobile phones can be set up with wireless routers. There is no real difference between the setup process and the setup process with a computer.

The steps are as follows

One. Enable the wireless function (WLAN) on your phone, then search for the WiFi signal of the wireless router, and after searching for the signal, click to connect. Most wireless routers, the default configuration of the factory has enabled wireless wifi, there will be instructions on the label of the router, just log in according to the SSID and password given in the instructions.

Two. Open the browser on your phone and enter the settings of your router in the address bar of your browser**: for example, tp-link is the default. For the settings of other brands of wireless routers**, please check on your router's nameplate (label), which is all marked on it.

Three. The first time the new version of TP-Link router is set up, an interface will pop up to set the administrator password, as shown in the following figure. Users can set an administrator password by themselves.

Four. When you enter the router's settings interface for the first time, the "Setup Wizard" will automatically pop up, if it doesn't pop up, click the "Setup Wizard" on the left interface - click "Next".

Five. Select the Internet access method: Select "PPPoE (ADSL Virtual Dialing)" - Next", enter the broadband account number and broadband password provided by the broadband operator, and > click "Next".

Six. Wi-Fi Settings:

Wireless Status: On.

ssid", the user can customize, but note that Chinese cannot be used.

wpa-psk wpa2-psk", checked.

PSK password", which can be customized by the userBe sure to write it down and don't forget!

Click "Next" when you're done.

Seven. The setup is complete. You may be prompted to restart the router, just click on the prompts.

Your question is not very clear, first confirm whether your router has set up encryption, some mobile phones do not support multiple encryption protocols. The best thing to do is to remove the encryption. In addition, if your router has the DHCP service function enabled, if this function is not enabled, the mobile phone will not be able to get the IP address assigned by the router, so it can detect the signal but cannot access the Internet.

Specifically, you can use the computer again to enter the router according to the tips in these two aspects.

Hello, route settingsYou can set it up by following the steps below!

1. Connect the home network cable to the WAN port of the router, 2. Connect your computer with another network cable at one end, and connect the LAN port of your router at the other end

interface! 3. Open the computer, open the browser, enter the route login IP in the address bar, 4, enter the route login account and password in the pop-up dialog box, friendly reminder, if you don't know the route login IP, login account and password.

code, you can turn the route over and look at it, and there is a writing on the back of the route!

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface.

PPPoE, enter your Internet account and password!

6. After the settings are completed, save the exit and restart the route!

Once the routing restart is complete, your routing hardware connection and setup are complete!

In addition, there is another point to remind that if your home is a ** line and there is a cat, it is recommended that you turn off the power of the cat when you set the route, and when the route is set up, turn on the power of the cat!

If the Wi-Fi connected to the wireless router on your phone cannot access the Internet, it may be caused by the wireless network not being set up, and it is recommended to try to set it up again.

The first line depends on whether your mobile phone is turned on wirelessly, and if it is turned on, it depends on whether the wireless connection is open, and the connection needs to enter the wireless connection password, and you can only access the Internet after connection.

1.Double-click the small computer icon on the computer, then click Properties, select Internet Protocol, and then click Attributes and select the two items of automatically obtaining IP address and automatically obtaining DNS server, and you can confirm.

2.Make sure your wireless router is set up correctly.

Is the wireless network on the phone on?

You can also connect to the router before it is set up, but you can't connect to the network, and your problem is that the router is not set up properly, or the settings are incorrect.

Look at the wireless routing setting manual, plug in the connection cable, enter the routing setting address point setting wizard, check the ADSL (PPPoE) virtual dial-up Internet access, and then click Next to enter the broadband account and password, and set it up yourself in the next step. Until the setup is complete! Or pay someone for a computer to help!

Wireless connection means that the wireless routing and the device are connected, but the Internet access is through the modem dial-up Internet connection is normal, and the Internet network signal is sent and received through the routing wireless function, which are two circuits.

As shown in the figure below, your question shows that paragraph B is passable, but paragraph A is not. You can log in to the router background to see if the broadband dial-up connection is working.

Based on personal experience, it's not that wifi can't access the Internet, it should be that your wireless router is not connected to the Internet at all, in layman's terms, your router has no data traffic coming in, please confirm if this is the case.

Confirmation: 1. If you have a laptop or something, see if the laptop can browse the web after connecting to the wireless network?

2. If you don't have a laptop, only a desktop, then connect the desktop computer from the wireless router port to see if you can surf the Internet normally (the general wireless line has several wiring ports).

If you are sure that the main device can access the Internet, but the mobile phone cannot be on, then you can only go to the mobile phone after-sales service point to find the answer. Is there a problem with the wifi hardware of the phone?