Is there a hood for the HS22 wide angle 20

It's also too obvious, JS is fooling you.

A wide-angle camera is a wide-angle camera when it does not keep focus, and any camera has not turned off the wide-angle function, so it can't be turned off; If, according to JS, you have to zoom to take pictures with a lens hood?

Fujifilm HS22 also has people buy alternative lens hoods, and the feedback effect is different; But the Fujifilm LH-HS10 original lens hood I use, there is no vignetting, and it can also be reversed, and it has been left on the machine, which does not affect the camera and puts it in the camera bag, which is very convenient. I didn't know if it was expensive at Fuji Gold Medal 130, but I was satisfied.

In addition, it is normal for the temperature to be too high, and there are often high temperature prompts when used in Guangxi, and I generally ignore it;

Many HS22 photographers have also reported this problem, which does not affect the quality of shooting; Some people think this temperature prompt is very annoying, they will go to the Internet**hs22 firmware update version, it is said that the temperature prompt value set by the original machine can be increased, and the machine will not prompt again when it is not very hot. I haven't tried it, and I don't dare to comment on the effect of this unofficial firmware upgrade version.

The HS22 is a telephoto and can be put on the hood, I am P500 and I bought the hood and it cost 130I also wanted to buy the HS22 at the beginning, how good is the image quality of the HS22.

Yes, the UV lens is screwed on the lens thread, and the lens hood is stuck on the lens bezel.

Yes. Lens hoods and UV lenses don't do the same thing.

The lens hood, anti-glare, can protect the lens to a certain extent, which can reduce the chance of hitting the lens.

UV lenses, at first to reduce the impact of ultraviolet rays on imaging, now basically for the protection of the lens, reduce dust, prevent scratching the lens, etc., especially this kind of telephoto camera that can not change the lens, once the lens is scratched, it is basically scrapped. The use of UV lenses may have an impact on night scenes, and some night scenes require the removal of UV lenses.

This shelf looks a bit thin when used on the HS22. Be careful when using outdoors. The hood is available in Fuji original and can be purchased at Fujifilm repair shops.

The function of the UV lens itself is to filter the ultraviolet rays that affect the quality of the **, in fact, there is already a filter in front of the CMOS in the HS22 lens, it doesn't matter if you match it or not, if you have to buy a 58mm one, just install it.

The access to the camera's tripod is the same specification, whether you are a card player or a DSLR, so the Fujifilm HS22 can use the Weifeng 3110A tripod. The choice of the hood is only ***, UV is best to buy imported, **expensive, but the light transmission effect and sharpness are better than the domestic ones, it is recommended to be high, cheap and affordable, but don't buy fakes.

It is recommended that you use a square one. The effect is relatively better, if it is a long focal length lens with a lotus.

If you are a fisheye, use a lotus-shaped short cover, generally wide-angle if it is not a fixed focus, it is still equipped with a lotus line, and if it is fixed, it is a formula short cover.

It doesn't matter, just don't block the corners after installation.

Wearing a lens hood does not solve the problem of vignetting. The role of the hood is to block out excess light. Camera lenses are composed of multiple lenses, when the sunlight hits the lens, the light will be constantly reflected between the lenses, thus producing ghosts or causing a feeling of gray light, so the lens hood can help improve the image quality.

It is necessary to choose the right lens shield and use it appropriately. Zoom lenses are more prone to flares than other types of lenses, and a proper lens hood is indispensable. Sometimes the occlusion caused by the lens hood is not visible on the viewfinder screen of a SLR camera.

When shooting with a small aperture, the hood tends to fall into the depth-of-field range as well. Some lens hoods are effective at one end of the long focal length, but when used at the short focal length end, it will cause the vignetting caused by occlusion that cannot be seen on the viewfinder screen. Therefore, it is crucial to choose the right lens hood for your zoom lens and use it wisely.

1. Use the original lens shield.

2. Cut off or file off the four corners of the hood and do it according to the shape of the flower-shaped hood.

This problem is very simple, please match the original adapter ring and filter and wide-angle lens, because some of the reasons caused by the length of the matching accessories are not matched.

The lens diameter is 58mm, so the hood and UV lens are also 58mm. It is best to choose a bayonet for the hood, because it can be reversed on the lens; UV is very important, dustproof, dustproof, the camera falls on the ground to protect the lens, and there is permeability, choose a better one.

This can be used with a UV lens box hood, with 58mm, 365 days to buy digital** is specialized in digital this, there is **customer service, you can consult them, they**machines are sold**licensed,**also fair,you can go to see de .Directly buy 365 days a day, the first one is!

Yes, the shape of the lens hood of the telephoto is larger, and it is easy to have glare without adding it.

It has nothing to do with the lens, it has to do with the light, and it is best to install both.