Wood floor waxing will be slippery, no waxing and no maintenance, how to do better!

1. The wooden floor of the basketball court should not be waxed.

There are strict requirements and regulations on the surface of the coefficient of friction of sports wood flooring, if the ground is raised, the newly installed floor should also be waxed, maintenance? Not really. The surface of the board is too smooth, and the athletes in the process of sports, due to the low friction coefficient, can easily lead to foot slippage, which affects the normal performance of the competitive level, and may also slip and fall accidents in serious cases, so the maintenance of the sports venue that has just ended can not be waxed.

2. Paint the wooden floor of the basketball court.

The wooden floor of the basketball court should not be waxed, but the wooden floor of the basketball court can be painted with anti-corrosion protective paint. Professional sports wood flooring manufacturers will not only purchase water-based paint with higher solubility, but also the paint process will not be stolen. According to the actual needs, brush a few times when you should brush it.

Basketball court wood floor painting can protect the wood surface layer and prolong the service life of sports wood flooring, so in order to slow down the rate of wear and tear of sports flooring, laminate flooring anti-slip and abrasion resistance, it is necessary to paint and maintain the wooden floor panels of basketball courts.

1. The method of maintenance of composite wood flooring: you can usually use a vacuum cleaner or broom to clean the surface dust, and then wipe the surface of the floor with a rag or mop that is wrung out after being soaked and wrung out to no dripping. It is best to open the doors and windows after mopping the floor to allow air to circulate and dry the floor as soon as possible.

2. If the wear-resistant layer of composite wood flooring is damaged, the moisture-proof function and brightness of the floor will be affected, therefore, when walking on the floor, you should try to wear cloth slippers, preferably barefoot. Paste a soft-bottom protective pad on the feet of the furniture to avoid the feet of the furniture scratching the wear-resistant layer of the floor, and do not let heavy items smash the wear-resistant layer.

3. Tips for cleaning light-colored composite wood floors: wipe the floor directly with a rag dipped in rice water, or spray the rice water evenly on the wooden floor (not too much), wipe with a dry rag for 5 minutes, and the floor will be much cleaner. Cleaning of special stains:

Oil stains, paints, and inks can be wiped with special stain remover oil; Bloodstains, juice, red wine, beer and other residues should be wiped with a damp rag or a rag dipped in an appropriate amount of floor cleaner; Wax and chewing gum, put ice cubes on top for a while to freeze and shrink, then gently scrape, and then wipe with a damp rag or a rag dipped in an appropriate amount of floor cleaner. Laminate flooring should not be cleaned with strong acids and alkali liquids.

The correct maintenance method is to ensure the normal use of the basketball court wood floor, the stadium wood floor investment is large, the maintenance is difficult, the cost is high, the maintenance method is correct or not will directly affect the use of the wood floor effect and service life, daily maintenance to do:

1. It is strictly forbidden to wax the wooden floor of the sports field, according to the wooden products, waxing is the best general method to protect the wooden floor: but the wooden floor of the sports field has strict requirements for the surface friction coefficient, if the surface of the wooden floor is too smooth, the athlete in the process of sports, due to the reduction of friction and trembling, it is easy to cause the sole of the foot to slip, which affects the normal level of competition, and in serious cases, there will be slipping accidents, so the maintenance of the paint surface of the wooden floor of the sports field is not waxing. If an area is rubbed on the sole for a long time, the paint surface is polished, resulting in a reduction in the friction of the wood floor in the area, and it must be matted.

2. It is strictly forbidden to use solvent-based oil products to clean the wooden floor, solvent-based oil products include: gasoline, kerosene, alcohol, esters and other products that dissolve the paint surface, because solvent-based products will cause damage to the floor paint, and at the same time will reduce the friction coefficient of the paint surface, increase the finish and affect the normal use of the floor.

3. Floor ventilation holes, telescopic joints, sports equipment installation parts, etc. should be cleaned regularly, not blocked, and can be cleaned by vacuum cleaner or air compressor blowing. Clean the surface of the wooden floor with a vacuum cleaner regularly every day, use a wrung out non-drip mop to wipe the surface of the wooden floor, and increase the number of wipes in the dry season to ensure the appropriate air humidity in the venue.

Solid wood flooring does not need to be waxed during maintenance, because its wear resistance is very good. The brightness has been fixed, and there will be no cracks like in ordinary floors. The floor waxing maintenance refers to the application of a layer of wax on the surface of the floor, when the wax on it solidifies, it can play a role in isolating air, water vapor and dust, thereby reducing the damage to the floor caused by oxidation or removing harmful substances in the air, and at the same time can also reduce the wear and tear of shoes on the floor, thereby prolonging the service life of the floor.

1.Floor waxing is generally used for wood flooring products, while typical solid wood flooring generally requires waxing. For solid wood flooring, solid wood flooring has the advantages of beautiful and natural appearance, comfortable foot feeling and good thermal insulation performance, which overcomes the shortcomings of solid wood flooring that it is easy to warp and crack due to monomer shrinkage.

When cleaning the spine, you can first use a broom to quietly sweep away the dust and debris on the floor, and then wipe it with a rag that wrung out the water. If you are careful, you will not wipe it clean with a damp rag.

2.Parquet flooring needs to keep the floor dry. Be careful not to let water drip on the parquet, otherwise it will cause moisture or even mildew on the floor over time.

When water droplets fall on the local plate, pay attention to wipe it with a dry cotton cloth in time. If there is direct sunlight on parquet, prolonged exposure to the sun can cause the floor to crack. If it's a sunny day, when the sun is strong in the summer, the curtains should be closed to avoid cracking the floor.

In daily life, be careful not to scratch the floor with sharp objects, especially when moving furniture, pay attention to lifting the furniture before moving. If you drag it directly, it will leave deep marks on the floor.

3.If there are oil stains or other stains on the floor, wipe them directly with a rag or mop dipped in warm water and a small amount of laundry detergent. If you accidentally get painted, remove the stain in time.

Once the floor is completely dry, mix the container with the floor wax well and spray it evenly on the floor. Cover the baseboards and furniture with tape to avoid staining the floor wax. The above is the answer to the question of what kind of wooden flooring does not need to be waxed during maintenance, and why.

You can choose Peiyin reinforced compound Linghe flooring, or you can choose three-layer solid wood flooring, these two kinds of floors do not need waxing when they are flat, but the solid wood floor will expand and shrink in the heat, so the moisture content of the floor used in each area is different.

Solid wood balancing composite floor does not need waxing during maintenance, first of all, the damage resistance of the solid wood compound floor itself is better than that of the hole, and the smoothness of the surface is also better, and it does not need wax to protect it, and it will not crack like other wooden floors after use.

Laminate flooring does not need to be waxed during maintenance, and other wooden floors need to be waxed, because the laminate floor itself is very smooth in appearance, so this kind of floor does not need additional waxing.

Wooden floors need to be flushed back when they are maintained, and the cost of leakage is higher when the solid wood floor is in the warehouse, and the cost of caring for the dust floor is relatively low, and if the floor is not waxed often, it is easy to deform.

Many families may have this problem, the wooden floor at home has lost its original luster, looks very dull, and has not lost the gorgeousness when it was first laid. This is because the floor has been used for a long time, and people often have to walk around on the floor, and the floor is slightly worn, or they usually do not pay attention to the maintenance of the floor, resulting in the destruction of the protective film on the surface of the floor. So what to do if the wooden floor is dull?

In fact, people can wax the floor, so that the floor can be restored to its former glory. So how do you wax a wooden floor? Fuwo decoration network, I will take you to understand.

Waxing environment preparation].

Floor waxing is best done when the weather is good. It is necessary to avoid construction in rainy days with high humidity and low temperature, too high humidity is easy to produce white turbidity, and the temperature is lower than 5 degrees Celsius floor wax is easy to harden, which is not conducive to construction.

Preparation of construction tools and floor wax].

A waxing machine is often used for large-area waxing, and dust pushers or soft cloths are used for small areas. Nowadays, many people also have a smaller, lighter waxing machine in their homes, which can be easily used when waxing. If you don't have a waxing machine, you can use simple tools such as dust pusher and soft cloth.

Tidy up and clean the floor].

Before starting waxing, you need to tidy up the furniture in the area that needs to be waxed and determine the waxing area. At the same time, it is also necessary to clean the floor area to ensure that there is no dust or other dirt before waxing to prevent the finish of waxing. Cleaning is usually done by wiping the floor with a wrung out mop or soft cloth, and after cleaning, it is necessary to wait for the moisture on the floor to dry completely before waxing.

Waxing】 Shake down the container with the floor wax and stir well. Soak the floor wax thoroughly with a clean rag or sponge to ensure that it does not drip as the standard. Shake and stir well the floor wax, you can try it in an inconspicuous place first, and then apply the wax as a whole after confirming that there is no abnormality.

Then use a clean rag or special waxing dust to fully dip the wood floor wax, carefully apply it in the direction of the wood grain of the wood floor, do not be too fast, do not miss the coating or uneven thickness, and keep the thickness even. 【Polishing】

Generally, it will be done twice, and after the first time, the wax will be applied again. Each wax must wait for the previous layer of wax to dry thoroughly before the next layer of wax, and polish the surface with fine sandpaper or soft cloth after it is completely dry.

Why is it called laminate flooring? Because there is no need to do maintenance.

In addition, laminate flooring, which can be understood as "disposable flooring" and "plastic flooring", does not require waxing or wood wax oil.

Regular maintenance of solid wood flooring with wood wax oil can slow down the wear and tear of the floor and extend the service life.

Many families have begun to choose to put a set of wooden flooring on the home, warm in winter and cool in summer, green and harmless, but the wooden floor has been used for a long time, it is inevitable that some bumps will occur, resulting in a lot of large and small scratches, which looks very unsightly, if you want to avoid this situation, you can consider waxing the wooden floor at home before moving in, reducing the appearance of scratches from the beginning, and prolonging the service life of the wooden floor. The first step, the ground cleaning, before waxing the wooden floor, you must do a good job of cleaning the ground, if the dust on the ground is not cleaned, it will greatly affect the effect of waxing, remember to wait until the floor is completely dry after cleaning, you can start waxing. The second step, soft cloth wiping, will be soaked in the floor wax soft cloth, along the floor texture gently wiped, the application process must be even, to prevent the occurrence of thin and thick conditions, the first side of waxing is dry, but also need to use sandpaper for surface grinding, and then start the second application, the premise is that the floor is dry, generally waxing two or three times.

The third step, polishing, after the floor is dry, you can polish it, after this step, your wooden floor will look extra neat and bright. Fourth, ventilation, the wooden floor after the waxing is completed, it also needs to be ventilated for more than 48 hours, and the check-in must wait until the toxic chemicals are completely volatilized, and the waxing process and after the end need to avoid open flames, and the remaining floor wax also needs to be sealed. Do you have a clear idea of the process of waxing the wooden board, find a professional decorator to make your wooden floor shine again.

Proper waxing of wood floors can protect against moisture, damage, increase surface glossiness and facilitate cleaning, but if waxed too often, it can cause damage to wood floors. Frequent waxing will cause the wax scale and wax layer to be superimposed, and there will be a gray layer in the middle of the wax layer twice, which will affect the waxing effect.

At present, more and more families are laying laminate flooring, the surface of laminate flooring is wear-resistant paper, the composition is "aluminum oxide", this metal layer makes wax can not penetrate into the interior of the wood floor, can only adhere to the surface of the wood floor. After waxing, people will leave footprints when walking, and the surface of the wooden floor will become like a "big flower face" after a long time, which will affect the beauty of the wooden floor and be difficult to wipe and maintain.

When the air is dry, laminate flooring should not be cleaned and maintained with waxing or detergent, and should not be polished with sandpaper. It can be wiped with a wrung out rag, then maintained with a care solution, and the hard-to-wipe areas can be removed with a special detergent.

If the home is laid with solid wood flooring, the waxing frequency should not be frequent. It is best to wax once every 6 months. Generally, solid wood flooring does not need to be waxed with essential oils and the like in the later stage, and the usual maintenance only needs to be mopped with a wet mop.

In the later stage, there is no need to wax the wooden floor with essential oils and the like, and the usual maintenance only needs to be mopped with a wet mop.

First, the waxing of the wooden floor is not laid, only the wax remover must be changed, and the wax that has been beaten is removed and re-beaten. Choosing the right floor wax is also crucial, and the best for beginners is natural wood wax (i.e. beeswax). Wood wax is very easy to play, and novices will not play the nuclear posture phenomenon.

On the other hand, if you choose boxed solid wax, whether it is waxing or polishing, you need the operator to have rich waxing skills.

Second, if it is a large area of the floor that needs to be waxed, it is recommended that you ask a professional cleaning company to do it, because they have a professional waxing and polishing machine, and the construction is fast and inexpensive. And if the waxing area is not large, then it is recommended that the owner who has time can do it himself.

1. Waxing environment preparation.

Floor waxing is best to choose when the weather is better, to avoid construction in rainy days with high humidity and low temperature, too high humidity is easy to produce white turbidity, and the temperature is lower than 5 degrees Celsius floor wax is easy to harden, not conducive to construction.

2. Preparation of construction tools and floor wax.

Large-area waxing often uses a waxing machine, and the ants are slow.