Is waxing required for laminate flooring? How to maintain laminate flooring

1. The wooden floor of the basketball court should not be waxed.

There are strict requirements and regulations on the surface of the coefficient of friction of sports wood flooring, if the ground is raised, the newly installed floor should also be waxed, maintenance? Not really. The surface of the board is too smooth, and the athletes in the process of sports, due to the low friction coefficient, can easily lead to foot slippage, which affects the normal performance of the competitive level, and may also slip and fall accidents in serious cases, so the maintenance of the sports venue that has just ended can not be waxed.

2. Paint the wooden floor of the basketball court.

The wooden floor of the basketball court should not be waxed, but the wooden floor of the basketball court can be painted with anti-corrosion protective paint. Professional sports wood flooring manufacturers will not only purchase water-based paint with higher solubility, but also the paint process will not be stolen. According to the actual needs, brush a few times when you should brush it.

Basketball court wood floor painting can protect the wood surface layer and prolong the service life of sports wood flooring, so in order to slow down the rate of wear and tear of sports flooring, laminate flooring anti-slip and abrasion resistance, it is necessary to paint and maintain the wooden floor panels of basketball courts.

Introduction: Wooden flooring is a kind of flooring that everyone favors when decorating their rooms, because wooden flooring not only looks very beautiful, but also has strong wear resistance, and most importantly, it is very environmentally friendly, and there is no pollution to the air in the room, so it is loved by everyone. Laminate flooring is a very high-quality flooring, which has a certain improvement over traditional wood flooring in various properties.

Many wood floors are waxed to increase the service life of wood floors, and the following is a detailed introduction to whether composite wood floors need to be waxed, and how to maintain composite wood floors.

Does laminate flooring need to be waxed

Traditional wood flooring needs to be waxed regularly, composite wood flooring is not suitable for waxing maintenance, composite wood flooring itself has good color and luster, as long as the floor is kept dry and clean, waxing will be self-defeating, is the surface of the floor oily, because the surface of the composite wood floor has a layer of protective substance, the protective oil used in waxing can not penetrate it at all, but will cause inconvenience to our use.

The daily cleaning of composite wood flooring is relatively simple, just vacuum with a vacuum cleaner, wipe with a semi-damp cloth and mop, of course, be careful not to get too wet. In addition, the surface of the composite wood floor is a thin layer of crystalline aluminum oxide wear-resistant layer, to avoid the wear-resistant layer being destroyed, in case of nail polish, ink, wine, etc. after being polluted, immediately scrub with a special remover, do not use sandpaper, use chemicals such as cleaning agents with caution, do not wax, paint, to prevent the destruction of the surface wear-resistant layer.

How to maintain laminate flooring

Keep it dry: whether it is a solid wood floor or a solid wood parquet floor, you need to keep the floor dry, especially after taking a shower, you should pay special attention to not let water drip on the parquet, if the water is dripped, you should wipe it clean with a dry cotton cloth in time. Failure to do so will result in a bulge in the floor.

Direct sunlight: Do not let the sunlight shine directly on the parquet, pay attention to the window, if it is sunny, you must pay attention to close the curtains in the summer when the sun is stronger, if it is exposed to strong sunlight for a long time, it will cause the floor to crack.

Be careful with sharp objects: we must be careful not to scratch the floor with sharp objects, especially when we are moving furniture, it is recommended to move the furniture off the ground and then carry it, do not drag it directly, which will leave a deep mark on the floor.

Do a good job of daily cleaning: If the parquet floor is dirty, it should be cleaned up in time, wipe it with a cotton cloth, and it is best not to use detergent.

Conclusion: Through the above introduction, I believe you have a certain understanding of whether composite wood flooring needs waxing and the maintenance method of composite wood flooring. Composite wood flooring is a new type of wood flooring, not a single solid wood material and the floor, in the traditional wood flooring functions at the same time, but also to a certain degree of optimization, here recommended, we must choose a big brand of composite wood flooring when choosing a composite wood floor, because the quality of the big brand of composite wood flooring is more guaranteed.

I hope that through the introduction, we can help you understand whether composite wood flooring needs waxing, and how to maintain composite wood flooring.

1. Laminate flooring.

There is no need for waxing, and there is no need to use essential oils for maintenance. Laminate flooring is not the same as solid wood flooring, its surface is originally very smooth, and the brightness is also good. Let's say you wax laminate flooring, and here's what happens:

The brightness of the floor surface cannot be improved, and it cannot meet the use standards stipulated by the state. Waxing the wear-resistant layer of laminate flooring does not rub the floor directly, but the wax film layer, making it susceptible to abrasion. It is easy to clean the original wear-resistant layer, but if you do it after waxing, it will be more troublesome.

2. Laminate floor maintenance steps.

Use a broom regularly.

Or a vacuum cleaner.

to clean the dust from the laminate flooring surface, and then wipe the floor surface with a non-dripping cloth or mop. After the initial cleaning, it's a good idea to open the windows and doors to allow air to circulate and dry the floor as quickly as possible.

2) For some special stains on the composite floor, such as oil stains, ink, etc., you can use special floor stain remover oil to wipe them; If it is a stain such as blood, juice, red wine or beer, you can use a rag dipped in an appropriate amount of floor cleaner to wipe it off; If the surface of the floor is stained with chewing gum.

Place ice cubes on top for a few minutes, freeze and shrink, and then gently scrape up. It should be noted that strong acid and alkali liquids must not be used to clean laminate flooring.

3) When the occupants walk on the composite floor, do not wear outdoor shoes indoors, let alone wear high heels to step on them, it is best to wear home slippers. In addition, the feet of the furniture can be covered with a soft-soled protective mat to avoid scratching the wear layer of the floor.

4) The use of maintenance fluid can make the surface of the laminate floor brighter and more beautiful, and of course, it can also extend the service life of the paint on the surface of the laminate floor. With maintenance solution, it can be maintained once a year, and it is not troublesome.

5) The external environment in which the laminate floor is located should be kept dry. Also, if you want to clean the floor, try to use a wrung out mop or rag; If you want to wipe dirt off the floor, try to use a neutral cleaning solvent.

1. Solid wood parquet does not need to be waxed, because the wear resistance of the composite floor itself is very high, and the gloss of the surface is also very good, and it will not crack like the solid wood floor. Moreover, there is a protective film on the surface of the parquet, and waxing will affect the normal use of the floor.

2. When cleaning the parquet, you can first sweep away the dust and debris with a clean broom, and then wipe it with a rag that wrung out the water. If the area over the floor is too large, you can wash the cloth mop, and then hang it up to drip dry water droplets to mop the ground.

3. The floor must not be washed with water, nor can it be cleaned with a wet rag or mop. If there is a watery substance spilled on the ground, it should be wiped dry immediately with a dry rag. If conditions permit, you can also apply a layer of floor wax at intervals to strengthen the protection of the floor.

If the paint surface has been damaged, you can repair it with ordinary varnish or ask the manufacturer to repair it.

Composite wood flooring usually does not need waxing, because it is more wear-resistant, not so expensive, usually pay attention to cleaning, wipe the floor more to keep it clean. So, what should I do if I keep walking after waxing the laminate floor? Let's take a look at what this site has to offer!

No, you don't.

Laminate flooring is not suitable for waxing care, its color and luster itself is very good, as long as the floor is kept dry and clean, waxing is self-defeating and makes the floor surface too oily, because the material is a layer of protective wax on the surface of the composite wood floor, the application can not penetrate it, and the use of it will lead to inconvenience in daily use. In addition, laminate flooring can be wiped with a vacuum cleaner and wiped with a semi-damp cloth or mop.

1. The wooden floor squeaks after waxing, and liquid waxing (or essential oils) should generally be used when waxing, and after drying, a hard shell is formed, and when someone walks, they rub against each other and make a sound. Usually, after a period of use, the sound disappears. If the noise of Tongbi is obvious, you can also drip a small amount of oil in the cracks in the floor of the noisy**.

2. In addition, the main reason for stepping on the ring of the wooden floor is the uneven ground. If it is seasonal, it may be that the air humidity is high, as in summer, it is the floor moisture swelling.

3. It is also possible that the corrugated wood on the floor is loose, and the gaps of adjacent floor materials rub against each other to produce noise. "Even before waxing" means that the cause of the noise is already there, while "after waxing it is noisy and everywhere" means that the problem is developing.

1. Clean with a vacuum cleaner If we want to keep the laminate floor clean, the first thing we need to do is to clean and clean it regularly. For example, a vacuum cleaner with a filter cleans the floor, which not only easily accumulates dust and particles on the floor, but also effectively filters out some harmful microorganisms.

2. Clean with a mop and rag If it is stained with composite wood flooring, now we can use a mop and rag to dip it in some rice soup, and gently wipe it in the stained place to take the next step, which can not only easily remove all the stains, but also make the floor full of noisy hall shine at the same time.

3. Use "ice" to clean In addition, if the composite wood floor is viscous, now we can take the "ice" method to solve the problem. First, put a plastic bag with iced gum and let it solidify, then use a small wooden scraper strip or brush (do not use sharp tools, otherwise it will be easy to scratch the composite wooden floor) and finally wipe it with a rag.

In modern home decoration, people often use parquet to decorate the floor. Because this kind of flooring is not only durable, but also environmentally friendly. So, what should we pay attention to when using parquet?

What are the methods of waxing? Let's take a look.

Renderings of parquet.

1. Waxing environment preparation.

Before waxing parquet, choose to do it when the weather is better, such as this cool autumn day. It is necessary to avoid construction in rainy days with high humidity and low temperature, too high humidity is easy to produce white turbidity, and the temperature is lower than 5 degrees Celsius floor wax is easy to harden, which is not conducive to construction.

2. Clean the ground.

Before starting waxing, you need to tidy up the furniture in the area that needs to be waxed and determine the waxing area. At the same time, the floor area should also be cleaned to ensure that there is no dust or other dirt before waxing to prevent the finish of waxing. Cleaning is usually done by wiping the floor with a wrung out mop or soft cloth, and after cleaning, it is necessary to wait for the moisture on the floor to dry completely before waxing.

Renderings of parquet.

3. Preparation of construction tools and floor wax.

A waxing machine is often used for large-area waxing, and dust pushers or soft cloths are used for small areas. Nowadays, many people also have smaller and lighter waxing machines in their homes, which can be easily used when waxing. If there is no waxing machine, you can use simple tools such as dust pusher and soft cloth, do not look at the simplicity of the tool, but the waxing effect is not necessarily bad, but may be more detailed.

In addition, the appropriate floor wax needs to be prepared.

4. Waxing. Shake down the container with the floor wax and stir well. Soak the floor wax thoroughly with a clean rag or sponge to ensure that it does not drip as the standard.

Shake and stir well the floor wax, which can be tried in an inconspicuous place, and then wax as a whole after confirming that there is no abnormality. Then use a clean rag or special waxing dust to fully dip the wood floor wax, and carefully apply it in the direction of the wood grain of the wood floor, not too fast, do not miss the coating or uneven thickness, and keep the thickness even.

Renderings of parquet.

5. Polishing. Generally, it will be beaten twice, and after the beating is completed, the wax will be dug again. Each wax must wait for the previous layer of wax to dry thoroughly before the next layer of wax, and polish the surface with fine sandpaper or soft cloth after it is completely dry.

Well, the above is the relevant introduction of the steps of waxing parquet, and have you remembered these waxing steps? If you want to know more steps on waxing parquet, stay tuned.