What is the impact of the external environment on the performance of non standard automatic welding

1.Personnel operation factors: training qualified operators is the most important factor to maintain the stability of non-standard automatic welding machine equipment, "reasonable operation, constant maintenance, immediate maintenance".

2.Ground vibration: many factories need to produce physical displacement actions such as drag and vibration in the production of the motor, which not only brings huge noise, but also the violent vibration brought by the machine may cause damage to the non-standard automatic welding machine equipment, so when the non-standard automatic welding machine equipment is placed, keep the non-standard automatic welding machine equipment away from the work site with a large seismic source as much as possible; If the working place cannot be changed, sponges and bufferable objects should be placed under the main body of non-standard automation equipment to reduce the harm caused by vibration.

3.Environmental factors: the same batch, the same type of non-standard automatic welding machine equipment in different customer enterprises, may have different performance, a good industrial environment can make its equipment can play the maximum performance, and on the contrary, there may be all kinds of unbelievable unstable symptoms.

A good environment includes, temperature, temperature, ground, air, and so on.

It depends on what kind of external environment and what kind of non-standard automatic welding machine equipment, you are too general in both of these things, and there is no way to be specific to you. High temperatures, low temperatures, dusty, etc...

There are many types of pipe automatic welders, while resistance butt welders are just one type. In the welding process, the contact surface of the resistor depends on the state, temperature and pressure of its surface. In general, the increase in temperature or pressure will decrease the contact resistance due to the increase of the actual contact area.

Let's let the automatic welding equipment take you to understand.

1. It is best to carry out regular polishing of the contact points and electrodes of the circuit breaker on the welding equipment, and fasten the parts regularly. The cooling water used should not exceed 40, and the amount of water discharged should be adjusted according to the air temperature.

2. It is best to install the automatic welding equipment indoors, and there is reliable grounding, the length of the electric welding wire should not be greater than 30m, and when the wire needs to be lengthened, the cross-section of the wire should be increased accordingly. In the welding site, it is not possible to stack flammable and explosive items such as oil, wood, and oxygen cylinders.

3. The flash area of the welding equipment should be equipped with a flame retardant baffle, and outsiders are not allowed to enter the welding process, and the indoor temperature environment is very important in winter welding.

4. The automatic welding equipment should be checked and confirmed before welding, the pressure mechanism of the welding machine is flexible, the clamp is firm, and the air pressure and hydraulic system are free of leakage.

Cantilever pipe automatic welding machine.