Koleos maintenance lamp to zero, how to reset Koleos maintenance lamp to zero

1.First of all, put the Koleos in a power-on state, do not ignite.

2.Use the lever on the right side of the steering wheel to find the service interval, and press and hold the OK button to enter the options.

3.Then it will display the mileage and time from the next maintenance, press and hold the OK button again until it shows 5000 kilometers Six months to complete the maintenance of the light to zero.

Is it a maintenance reminder light?

The maintenance reminder light may be on your car near the maintenance kilometer.

You can switch to maintenance kilometers through the end button on the right paddle (that is, the button that switches to see mileage, average speed, fuel consumption, etc.), and then press and hold the end button to clear or reset it. If it really doesn't work, go to 4s and let them set it up for you.

The first 3 years of Koleos were free of charge, so why don't you go?

Is that okay?

Koleos zero maintenance light is relatively simple to operate, only need to power on the car, and then press and hold the OK button on the right side of the steering wheel, and then it will display the mileage and time from the next maintenance, at this time press the OK button again until the driving computer shows that the mileage from the next maintenance is 5000 kilometers, and the time from the next maintenance is six months.

The Koleos is a compact urban SUV owned by Renault, and this car uses a total of two engines, one is a liter naturally aspirated engine and the other is a liter naturally aspirated engine.

The naturally aspirated engine has 154 hp and 204 Nm of torque, this engine has a maximum torque of 4,400 rpm and a maximum power of 6,000 rpm. The engine is equipped with direct injection technology and uses an aluminum alloy cylinder head block.

This engine is mated to a CVT gearbox.

The naturally aspirated engine of Koleos has a maximum torque of 186 hp and 246 Nm, with a maximum torque of 4,000 rpm and a maximum power of 6,000 rpm.

This engine is equipped with multi-point guess EFI technology and uses an aluminum alloy cylinder head block.

This engine is mated to a CVT gearbox.

The Corleos uses MacPherson independent suspension for the front suspension and multi-link independent suspension for the rear.

Millions of car purchase subsidies.

The method of zeroing the maintenance lamp of the 17 Reloko Leos is:

1.First of all, Koleos is in a situation where there is electricity, and there is no need to light the fire.

2.Use the lever on the right side of the steering wheel to find the maintenance cycle time, and press and hold the OK button to enter the selection.

3.Then it will indicate the interval between the next maintenance trip and the interval between them, and press and hold the OK button again until it indicates that 5000 kilometers will be maintained in six months, and the lamp will be zeroed.

The zeroing process of the old Reloko Leos maintenance lamp:

1. The starting motor is maintained at the first round of the ON situation, and the engine of the car is terminated.

2. Tap the button in the middle of the power switch of the wiper until the word "0" km appears on the dashboard display.

3. Press the button on the dashboard of the car for about 5 seconds, until the word "5000" km is displayed on the dashboard, and release the button to reset the maintenance light.

The effect of the Koleos maintenance lights is to record the number of kilometers used in some key components, like a timer in a 100-meter race, which not only prompts the car buyer, but also facilitates the observation of the Koleos by the car repair staff, and they will help you reset the maintenance lights after maintenance. If the car buyer dismantles and replaces the relevant parts, he must reset the maintenance lamp of Koleos, otherwise the data information of the next maintenance will be very messy and cannot be accurately obtained into the application.

Millions of car purchase subsidies.

The method of zeroing the maintenance lamp of the 17 Reloko Leos is:

1.First of all, Koleos is in a situation where there is electricity, and there is no need to light the fire.

2.Use the lever on the right side of the steering wheel Sakura to find the maintenance cycle time, and press and hold the OK button to enter the selection.

3.Then it will indicate the distance between the next maintenance trip and time, and press and hold the OK button again until it indicates that 5000 kilometers will be maintained in six months, and the lamp will be reset to zero.

The zeroing process of the old Reloko Leos maintenance lamp:

1. The starting motor is maintained at the ON condition, and the engine of the car is terminated.

2. Tap the button in the middle of the power switch of the wiper until the word "0" km appears on the dashboard display.

3. Press the button on the dashboard of the car for about 5 seconds, until the word "5000" km is displayed on the dashboard, and release the button to reset the maintenance light.

The effect of the Koleos maintenance lights is to record the number of kilometers used in the Xunson bar, some of the key components, like a timer in a 100-meter race, which not only alerts the car buyer, but also facilitates the observation of the Koleos by the car mechanic, and they will help you reset the maintenance lights after maintenance. If the car buyer disassembles and replaces the relevant parts, he must reset the maintenance lamp of Koleos, otherwise the data information of the next maintenance will be very messy, and the application time cannot be accurately obtained.

The way to zero the seven Renault Koleos maintenance lamps is:

1.First turn on the Koleos and don't ignite it.

2.Use the lever on the right side of the steering wheel to find the service interval and press and hold the OK key to enter the options.

3.The mileage and time for the next dry maintenance will then be displayed. Press and hold the OK button again until it shows 5000km for six months and the maintenance light is zero.

Steps to zero the old Renault Koleos repair lamp:

1.Keep the ignition on and turn the engine off.

2.Tap the button in the middle of the wiper switch until the word "0" km appears on the meter display.

3.Press and hold the button on the dashboard for about 5 seconds until the meter shows "5000" km. Release the button to complete the reset of the maintenance lamp.

The role of the Koleos maintenance light is to record the mileage of some important accessories, like a timer in a sprint race. It can not only remind the car owner, but also make it convenient for the car maintenance personnel to observe the Koleos, and they will help you reset the maintenance lights after the repair. If the owner replaces the relevant parts, be sure to reset the maintenance lights of the Koleos, otherwise the data of the next maintenance will be more chaotic and the use time cannot be accurately obtained.