Highlander maintenance light to zero, how to reset Toyota Highlander maintenance light to zero

How to set: 1. Turn on the ignition. 2. Press the button A in Figure 28-1-16 to display the mileage reading at B in Figure 28-1-16, and press and hold A "Tripa" in Figure 28-1-17 to display at B in Figure 28-1-17.

3. Turn off the ignition. 4. Press and hold the button to turn on the ignition switch in Figure 28-1-16 A or Figure 28-1-17. 6. Continue to press and hold the button for at least 5s

The maintenance of the vehicle is zero, and you can only go to the 4S shop to clear the system or ask the 4S shop to directly maintain the light and turn it off.

Hello, the maintenance of this car is zero, you can go to the 4S shop or repair shop to do it, professionals use the computer to reset, you can also read the manual, there is an operation on it.

Hello, the maintenance light of this car needs to be connected to a computer before it can be reset, it is recommended to go to the ssss shop for maintenance.

Generally speaking, go directly to the 4S store and let the computer staff directly use the computer to clear and reset.

Hello As you said in this case, if you want to maintain the lamp to zero, I personally recommend going to a nearby repair shop to use the computer to reset the maintenance reminder light, which is very simple.

Hello, if this maintenance lamp is zeroed, it can only be maintained by the staff of the 4S shop, and let the staff solve it for you.

There is a disp button on the steering wheel of Toyota Highlander, through which the vehicle instrument maintenance light can be reset to zero, and the specific operation steps are as follows:

1. Press and hold the DISP button on the vehicle's multi-function steering wheel.

2. At this time, the vehicle instrument will display the DISP mode.

3. After a while, the setting interface will appear.

4. Select the oil change option and select Yes option.

5. At this time, the zeroing operation is completed.

Toyota Highlander maintenance lamp zero method:

1) With the engine turned off, the Highlander depresses the short-range distance counter reset button under the tachometer and holds.

2) Put the Highlander ignition switch in the ON position, let go of the short-range distance counter reset button, and the "Service" sign will appear on the display.

3) Pull out the minute button on the clock and turn the minute button to the right, and the mileage display will appear on the display.

4) Turn off the engine and remind the message to reset.

5) Put the ignition in the ON position and the "service" sign disappears.

Highlander maintenance lamp reset method:

1. Turn the key in the Highlander ignition switch to the position;

2. Press the system selection button (S110S3) repeatedly until the menu item "Trip" is prominently stored in the multi-function display (A1P13);

3. First press the Accept Call button (S110S3) and hold it, then press the (OK) button (S110S6) and keep it pressed;

4. Press the Forward Scroll button (S110S1) repeatedly until the "Active Maintenance Reminder System Plus" (assystplus) is highlighted and stored, and then press the (OK) button.

**Highlander maintenance lamp zeroing method:

1.The flame-out key is opened.

2.Press the disp button on the right side of the steering wheel to enter the menu.

3.Find (disp settings, penultimate column), long press to enter the menu, 4, short press to find the maintenance settings.

5 Long press to enter Settings Reset Complete.

6. Exit to see if it's done.

1. Press the one-button start button first to start the vehicle engine, and the vehicle engine cannot be returned to zero.

2. After that, click the menu switch on the multi-function steering wheel.

3. At this time, the display screen displays vehicle information.

4. After that, click the down switch button on the steering wheel of the multi-track beam function.

5. After that, click the off button on the left side of the steering wheel, and the maintenance light will be reset to zero.

Inquire about customer service.

Extended information: Human beings can be defined at biological, spiritual, and cultural levels, or a combination of these definitions. Biologically, humans are classified as hominoids, chromosome 2 and orangutan nail chromosome centromere fusion (equilibrium translocation) association mode proximity of more than 16n, and multiple interarm inversions, the rest of the chromosomes have strong homology, is a higher animal.

On a spiritual level, man is described as being able to use the concept of a variety of souls that are believed to be associated with divine forces or beings in religion. In cultural anthropology, human beings are defined as beings capable of using language, with complex social organizations and technological developments.

How to set:

1. Turn on the ignition.

2. Press the button A in Figure 28-1-16 to display the mileage reading at B in Figure 28-1-16, and press and hold A "Tripa" in Figure 28-1-17 to display at B in Figure 28-1-17.

3. Turn off the ignition.

4. Press and hold the button A in Figure 28-1-16 or A in Figure 28-1-17.

5. Turn on the ignition.

6. Continue to press and hold the button for at least 5s

Turn off the engine, press and hold the short reset button, turn the engine ignition switch to the ON position, release the button, the service will appear on the dashboard, pull out the clock minute button, rotate to the right, and the display will show the remaining mileage. When the engine is turned off, it will prompt the recovery mileage, the ignition switch will be turned off, and the jujube return will be completed to zero.

How many kilometers of Highlander maintenance.

The maintenance mileage of the Highlander is 5000 kilometers once, and the first maintenance is within 6 months or 5000 kilometers. After the first service, it needs to be serviced here every 5,000 km. When the maintenance is approaching, there will be a maintenance light mountain hunger prompt, and the maintenance mileage can be recorded according to the maintenance light prompt.

Highlander body size.

The Highlander has a body length of 4890mm, a body width of 1925mm, a body height of 1720mm, a wheelbase of 2790mm, a front track of 1635mm, a rear track of 1630mm, and a 5-door 5-seat SUV.

Millions of car purchase subsidies.

1.Highlander presses the short distance counter reset button below the tachometer, which is held down when the engine is off;

2.Turn on the ignition switch of the engine, release the reset button of the short-distance counter, and the service logo will appear on the dashboard;

3.Pull out the minute hand button of the clock, turn the minute hand button to the right, and the mileage will appear on the display;

4.Turn off the engine at this time, and the trip computer will remind you to reset;

5.Turn on the ignition, the "Repair" sign disappears, and the entire maintenance light resets to zero.

Accessories: Use of car maintenance lights:

There are two ways to set up car service lights. First, the owner can directly set the number of kilometers. If the owner maintains the car every 5000 kilometers, after the maintenance of the car, the car maintenance light will be directly set to 5000 kilometers.

When the car continues to drive 5000 km, the car service light will come on. In this way, the owner can basically see it every time, and it will light up every time.

There is also a setting that can not set the number of kilometers, can only be maintained and reset, but how many kilometers for maintenance is not necessarily, the driving computer according to the number of kilometers traveled, time, driving road conditions, the usual load size and other simple sections to determine the vehicle needs to be maintained, if the maintenance time is determined according to the service life of the oil, the maintenance light may be lit.

Millions of car purchase subsidies.

With the engine turned off, press and hold the short distance counter reset button below the tachometer. Turn on the ignition switch, release the reset button of the short distance counter, and a service sign will appear on the display. Pull out the minute button on the clock and turn the minute button to the right, and the mileage display will appear on the display.

Turn off the engine and reset the reminder message.

Highlander will turn on the maintenance light when the service is about to expire to remind you that you need maintenance. After the oil change, you need to reset the oil lamp state and maintenance data. If some vehicles cannot be reset by the relevant maintenance, they can be reset if necessary by connecting to a diagnostic computer.

When we find that the maintenance light of the Toyota Highlander is on, we should go to the repair shop authorized by Toyota as soon as possible for repair, and the maintenance personnel will use a detector to zero the repair light after the repair. Of course, we can also repair it ourselves, but remember to zero the repair light to avoid errors in service time.

Regular maintenance is important. Changing the oil is the most common in maintenance. If you don't change it for a long time, it can easily deteriorate.

In this case, its lubrication will not be so good, the engine parts will also be severely worn, and the cooling effect will be greatly reduced. In severe cases, there will be a phenomenon of "bursting cylinder".

Millions of car purchase subsidies.

When the engine is turned off, press down the maintenance light reset button on the right side of the dashboard and need to hold it all the time. Put the ignition switch in ON mode, release the maintenance light reset button, and a "service" sign will appear on the display. Pull out the minute button on the clock and turn the minute button to the right, and the mileage display will appear on the display.

Turn off the engine and remind the message to reset.

With the increase of Highlander's driving time, the wear and tear of the accessories inside Hankai Yinglanda will gradually become serious, in order to ensure the normal driving of Highlander, Toyota manufacturers in the production of cars, set up some reminder indicators, to a certain mileage, the owner should replace the accessories in time, after the successful replacement, it is also necessary to zero the car maintenance lights.

The function of the maintenance light is to record the mileage of some important accessories, just like a timer in a sprint race, and play a role in reminding car owners and car maintenance staff. If the owner replaces the relevant parts and does not reset the maintenance light to zero, the corresponding car maintenance light will be reset to zero. If the owner replaces the relevant accessories, but does not return to zero, it will not affect the performance of the vehicle, but it will bring trouble to the next replacement of auto parts:

It is not possible to know exactly when the new accessory will be used.

Photo by Zhang Huangbin of Pacific Automobile Network).