Mercury MW310R router settings interface why there are no advanced settings

1. **Online Internet users: Please prepare 2 short network cables, one network cable is used to connect the network cable interface on the ADSL modem or optical modem and the WAN interface on the Mercury MW310R router; Another network cable, one end is connected to the computer, and the other end is connected to any 1 2 3 4 ports on the Mercury MW310R router.

2. Optical brazing Internet users: Users need to prepare 2 network cables, one of which is used to connect the WAN interface between the optical modem and the Mercury MW310R router, and the other network cable is used to connect the LAN interface between the computer and the Mercury MW310R router (any one of 1, 2, 3, and 4 can be used).

3. Network cable to enter the home to access the Internet: please prepare a short network cable, network cable to the home: refers to the broadband operator provides a network cable to the user's home; Please plug the network cable provided by the broadband operator into the WAN port on the Mercury MW310R router. Then connect the prepared network cable, one end to the computer, and the other end to the 1 2 3 4 any interface on the Mercury MW310R router.

Step 2: Set the IP address of the computer

Mercury MW310R wireless broadband router has DHCP server turned on by default, which can automatically assign IP addresses to computers, so you only need to configure the IP address of the computer to automatically obtain (dynamic IP); For details, please refer to How to Automatically Obtain an IP Address from a PC.

Step 3: Set up the MW310R router.

And press the Enter key, enter the username and password in the pop-up dialog box (both are admin by default), and click "OK".

2. Run the Setup Wizard: The "Setup Wizard" interface will automatically pop up when you log in to the configuration for the first time, if it pops up, you can click the "Setup Wizard" in the left menu to activate it - >Next".

3. Choose the Internet access method: Please choose according to your network access method, at present, most of the Internet access methods provided by domestic ISP broadband operators for ordinary users are "PPPoE (ADSL virtual dialing)", and this example is also demonstrated in this way. （ps：

If you are not sure how you can access the Internet, please consult your broadband operator).

5. Wireless settings: "Wireless Status" select "On" - SSID "User Defined Settings - >Wireless Security Options" select "WPA-PSK WPA2-PSK" - PSK Password" (that is, the verification password for connecting to the wireless network), and user custom settings - > click "Next".

6. Restart the router: Click "Restart".

After the MW310R wireless broadband router is rebooted, the Internet access parameters and wireless network just configured will take effect, and users can connect to the MW310R router to access the Internet by wired or wireless.

Keywords: router setting password, how to set wireless router password, mercury setting, computer is not on the Internet, how to connect a laptop to a wireless router, router and cat connection.

Aren't Internet settings and wireless settings just basic settings? What else do you want?!

<>1. Power on the wireless router first, connect the network cable from the LAN port of the wireless router to the computer, and automatically obtain the local connection IP address and DNS settings;

2. Enter in the browser of the computer: to open the login interface of the router - enter the correct login password, you can enter the setting interface of the Mercury MW310R, as shown in the figure below.

3. In the settings page of Mercury MW310R, click in turn: Advanced Settings - Wireless Settings - Master Network These 3 options are opened, and in the page that opens, you can reset the wireless password (WiFi password), as shown in the figure below.

4. If you want to avoid WiFi being rubbed by others, then the wireless password is best used: uppercase letters + lowercase letters + numbers + symbols, and the length of the password should be greater than 8 digits.

5. The wireless mode can choose 11B G N mixing, the wireless mode can choose 11A N AC mixing, the channel can be selected automatic, and the bandwidth can be selected 20 40MHz.

6. Finally, click Save, restart the router, and complete the settings.

How to set up the router model is MW300R

How to set up a wireless router.

Home Network Environment Cabling:

1. There is a cat (modem): cat (modem) - router WAN port; Router LAN port -- computer.

2. No cat (modem): network cable -- router WAN port; Router LAN port -- computer.

Computer into the router:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set up the router dialing brother:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] -WAN Settings], select [Normal Mode], and select [PPPoE Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Turn on the router's wireless function:

1. Select Wireless Settings - Basic Settings.

2. Check [Turn on Dousen wireless function] and click Save.

Set a wifi password

1. Wireless Settings -- Wireless Security Settings -- Select [WPA-PSK WPA2-PSK].

Empty dust acres, certification type: automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

[Expand].

Setup of the router

1. The line connection is the same as the previous bad router connection style. The ADSL cat RJ45 port is connected to the WAN of the router (don't tell me I don't know what the ADSL RJ45 port looks like. Oh, even if you don't know, it doesn't matter, because you can't connect it if you change to another cable), and the other network cable is connected to the LAN port of the router (usually the yellow port of the router) and the computer network card.

2. Turn on the computer and enter or, the specific IP address can be seen in the manual or the nameplate behind the router, and the username and password are also in it. Once you have entered the correct value, press enter to confirm.

3. In the router settings interface, set the Internet access mode through the setting wizard, because it is ADSL dial-up connection, so select PPPoE as the Internet access method, and click Next;

4. Then enter the account and password provided by the ISP (be sure to pay attention to the capitalization), other items can generally be ignored, such as the default value of the MTU value, and the DNS can be obtained automatically.

5. Click Next to save the settings. Through the author's patient explanation, a historic breakthrough was finally completed, teaching the network how to set up the router, hehe!

Note: If you are a wireless router, after completing step 4, you will generally enter the wireless router security settings interface, which requires you to set the encryption method and encryption password.

Mercury Wireless Router MW305R is a SOHO wireless router, many people don't understand what is the difference between SOHO wireless router and our ordinary home router. In fact, the difference between them is mainly reflected in the network speed, and there is not much difference in the settings. Next, I will teach you how to set up the Mercury wireless router MW305R.

First, use a network cable to connect one end to the LAN port of the wireless router and one end to the network port of the computer. Then type enter in the address bar of your computer browser.

Then enter admin in the "Username" and click the "Login" button to enter the wireless router settings interface. Generally, the IP address and username used by the wireless router are entered in this way, and there will be a label on the back of the wireless router.

Then in "Current Network Configuration", click on "Manual Settings".

In the "Internet connection type", select "PPPoE (username and password) connection type".

In PPPoE, first select "Dynamic PPPoE", and then fill in the username and password of the user and password dialog when you applied for ADSL.

Another setting in PPPoE is "Connection Mode Selection", select "Always". This mode ensures that your wireless router will automatically connect as soon as it is turned on, so you don't have to manually establish the connection. You can also click "Add New Schedule" to automatically connect to a more detailed time configuration.

On the Wireless Router Settings page, set the wireless network name

On the Wireless Security Mode page, select the type of security mode and set the WEP password.

You see, is the setup process of the Mercury wireless router MW305R the same as that of a general router? In the same way, other SOHO wireless routers can also be set up in the same way as above. In addition to SOHO routers, smart routers can also be used in office buildings, such as Xiaomi, Pole Router, etc., in the office The effect is not inferior to that of SOHO routers.

Send you a connection for me to set up the router (it's easy to follow along.)

The wireless router needs to be set up according to the Internet environment.

Different Internet environments have different ways to set up wireless routers.

If it is a fiber modem wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Refer to the installation guide or instruction manual of the product for details.