Help translate the electricity, 100 rewards belong to you, if the translation is good, additional re

Add me hi, I'll translate it for you, and change it immediately if the translation is not good!

As a result, the power plant is installing and commissioning, overhauling, retrofitting, refurbishing, maintaining and preventive repairs of steam turbines, turbine generators and power plants and their auxiliary systems, such as turbo blowers and turbocharged water pumps, so that they can be put into service immediately.

Turbines rarely have problems, so they have limited maintenance requirements. Any unbalanced rotor can cause vibration. In extreme cases, this vibration can cause the blades to detach and potentially flush out of the casing.

In addition, it is important that the steam turbine must be driven by dry steam. If a blade comes into contact with water in the steam (moisture carrier), it can quickly erode, which can lead to leaf imbalance and catastrophic failure. Moisture entering the blades is also likely to damage the thrust bearings of the turbine shaft.

To prevent this from happening, controllers and partitions need to be placed in the boiler to ensure the high quality of steam. A condensate drain was also installed inside the steam pipe, which led to the turbine. Maintenance is divided into preventive maintenance and collective maintenance.

Preventive maintenance is very important for equipment that (1) is about to degrade, or that is prone to deterioration, and (2) equipment that may suddenly fail during the long turn. Proper maintenance and skills are required to ensure that the system is up and running (chin, duan, &tang, 2006; tadashi, hiroyuki, &shunji, 2001)。

If maintenance is carried out on a fixed schedule (cyclical), the cycle can be adjusted according to the required level of maintenance. This maintenance model optimizes the balance between the cost of operating the power plant and the performance of the plant.

Figure 3 shows the system management mode. The reading device checks the error of the operating equipment, and the marking device transmits these error information to the control module for analysis, and then the control module transmits the analysis results to the alarm module to record data or issue an alarm.

In summer, radish kimchi and cucumber kimchi are very common.

South Korea is a small country. There is not enough land to grow vegetables. It often snows and is very cold in winter.

In the past, people there have found pepper to be very beneficial to the body, and have also found that Chinese cabbage soaked in salt water can be stored for a longer time. So, they pickled the Chinese cabbage with pepper and salt, and called it kimchi.

Now, more things are added to the kimchi, such as fish, lettuce, pears, apples, and other ingredients. Some scientists say that kimchi is very good for health, but there are also the opposite opinion. What do you think?

Question 1: What do Koreans generally do in the spring?

The most famous food in Korea is kimchi. This is the food that the people there eat every day. Again, there are about 190 types of kimchi in total.

There are different kimchi at different times of the year. For example, in the spring, there is "juicy kimchi", which is called "product kimchi", and Chinese cabbage is popular in summer. --

There are some more things in the back I still have some things, so half of the translation is good, and half of the points are good, and I will add to you when I have time, and I will translate them all by myself!

The most famous food is the food of Korean kimchi, which people there eat every day. Similarly, there are about 190 varieties of Korean kimchi, which vary from year to year. For example, in the spring, moist kimchi, the so-called cow called kimchi, Chinese cabbage are suitable.

The ** you gave is too vague! It's better to be able to write it down in English, thank you!

1.I bet would happily disclose its triple X rating, continuing their publication with pleasure. And others will be forced to self-rate, for example, can be listed on a directory service, or accesible through a particular browser. It will turn into a business.

2.With Nrarly $10,000 to buy his schedule, Hi said, "The real problem is free speech on free speech, and we need to protect it in pornography."'or the control of the parent company into their home is what is comed. ”

3.Legend has it that William Ellery, a representative from Rhode Island, was eager to see them as they were confronted with signing.

4.We both promise each other our lives, our wealth, and our sacred honors.

5.In my house, we tend to do the other way: build a pain on top of it and then discuss the taste.

6.In May last year, Televsion buyers hundreds of courtship performances were made by the contract of the oversized film company in the United States, which paid about $50 billion.

7.All the Americans in the United States have cooled since the end of the Cold War, when the big stuff categorically rejected all forms of anti-corruption of the American cultural brand.

8.Theme parks and other businesses offer financial insulation from studios to inevitable triggers.

9.With strong cash flow, U.S. companies purchase the latest filmmaking technology from their wealthy, continent-wide markets**, and more to accommodate celebrities to enjoy the special effects of their products.

It doesn't matter if you give points or not, I'm just playing around anyway.

I think these sentences are all in Chinese English, I don't know how they came from.

Do I get 100 points? Where?

NMR should be NMR (Magnetic Nuclear Resonance).

Phew: You're the seventh one I've helped with today!

When heating a steam turbine before it is used, the main steam shut-off valve (behind the boiler) has a bypass line that allows it to overheat.

The steam is slowly bypassed through the valves before overheating the lines and steam turbines in the system. In addition, a gearing unit rotates the turbine slowly to maintain a continuous heat supply to prevent unbalanced expansion and rotor bending when no steam is being supplied to the steam turbine. After the first rotation of the turbine by the rotation of the gears and the time allowed for the rotor to be straight (not bent), the gears are detached and steam is injected into the turbine.

For most utility and industrial steam turbines, a starting and load** will be included in the unit instruction manual. Its function is to instruct the turbine operator to minimize not only the rotor speed and the thermal stress on the casing when loading the turbine, but also to minimize the chance of the rotor heating up faster than the casing.

When starting a marine steam turbine (offshore unit), steam is usually injected into the rear paddles of the LP (low pressure) turbine and then enters the front paddles to slowly rotate the turbine at a speed of 10-15 revolutions per minute (rpm) to slowly heat the turbine.

Completely hand-translated, you can refer to it.

When heating up the steam turbine is used, the main river shut-off valve (after the boiler) has a bypass line that enables the superheated steam valve to slowly bypass the line before heating the steam turbine in the system. In addition, the steam engaged in the absence of gears is applied to the slowly rotating turbine of the turbine to keep and even warm the bow needed to prevent expansion and rotor imbalance. After the first rotation of the turbine talks about the fishing gear and allows time for the rotor to assume the straight plane (without looking down), the steering gear is disengaged, and the steam is accepted to the turbine.

For most utility and industrial steam turbines, a starting point and a stock prospectus included in the chart are loaded. As a starting point, the Loading Chart is used to guide turbine operators in loading their units not only to minimise and Shell rotor thermal stress, but also to maximize opportunities.

The rotor heats up faster than Shell. When starting on board.

In the steam turbine (marine group), the steam is usually accepted as a retracting blade located in the record (low pressure) turbine and then towards the turbine.

The blade of the future slowly rotates the turbine on October 15 revolutionizing the turbine per minute (rpm) to dollars, warming the turbine.

This is your response to your application to become a permanent resident of Canada.

After studying your application, I don't think you have a good reason to prove that you are in a relationship with ***'s father (mother) and son.

The relationship with the parents is questioned, and the DNA must be tested....Mom, are you applying to Canada for college?

In Beijing!

The point is:

For the child application, due to the lack of evidence you provide, you will also need to do a DNA test for the paternity between you and the child. The results are made by the agency they designate (paid at the bottom of the table) and the results are sent directly to them by the agency. You check first, and then check the child in the designated place in Beijing, and when you go to check, you must bring identification such as passport, etc., 2 2-inch photos, ID card and money.

It takes about 6 weeks. Continue your case after the outcome is known.