The laptop test hard disk time is inaccurate, how can the laptop hard drive power on time be inaccur

It could be a refurbished machine, at least a new one for the hard drive.

Master Lu's uncertainty may be something else, but when the hard disk is turned on, the cumulative boot disk data is in the chip itself, and the wrong direct read.

Your system is right to what kind of computer company version (ghost) is, right?

About the way of the measurement to get through the difficulty together stop the motor starts!

For new machines, the hard drive plus accrual time should be 3-15 hours, and 10-20 hours upstairs is said to be in the high-end models.

Overall measurement aspect.

to see if there are any issues.

Memtest: Memory test, which usually measures more than 300, shows 0 error.

Everest: For all the details related to the test hardware configuration, please refer to the attached official ** on the configuration is not different (in addition to checking the hard drive, it can also be replaced). In addition, you can test the screen for dead pixels and do fatigue testing machines (fatigue testing.

Try to do it for more than 4 hours, preferably running overnight)

keytest: The keys of the test keyboard are normal.

SP2004: Stability test, it's a habit not even by crashing for more than three hours (when running the software, your PC will be a super card, the card is normal).

Get the local wireless network and test whether the wireless network card is working properly.

Get an SD memory card and test the reader.

Usually these. Replacing a hard drive and thinking differently isn't necessarily a bad thing.

Spending the money on an old hard drive is equivalent to getting a new one.

Let's not use Aunt Lu, okay?

Go to the next hdtune and take a screenshot of the health page and the information page.

The number of hard disk uses is the number of times you read and write on the hard disk, and the time is the accumulated time of reading and writing. If your computer is in a hibernation state, the hard disk is not working, and the hard disk usage time is 0, so it is normal for the hard disk to be inconsistent with the boot time. Don't fret.

I've sold computers myself, so I think your computer should not be the notebook sampling machine that your classmates said, but a prototype of the notebook that was placed in the store before it was sold (the prototype is usually turned on in the morning until the end of the evening, if the computer is in the store for 10 days, 10 hours a day is 90 hours)! If your computer is not licensed, the store may also replace the hard disk for you, but this possibility is very small, generally second-hand notebooks will have this situation, your should be the prototype in the store!

It can be modified and can be cleared to 0, and the method is not very troublesome.

The usage time of the hard drive itself can be modified.

Hello, the check model of the notebook is calculated according to the motherboard, and some machines use another motherboard, so the check is a little different from the computer model. The use of the hard disk is not installed all the time after booting, and it does not rotate when the hard disk is not used and the data is not read or written, so the time is different. Finally, I would like to say that Master Lu is really unprofessional in checking these, and the accuracy of the information is very low.

It's possible that your computer is refurbished. Set the motherboard to reset the reset system to see if it is consistent with Master Lu's.

To check the hard disk usage time and times of the laptop, you need to use the software Master Lu, and the specific operation steps are as follows:

1. First of all, the computer needs to install the software Master Lu.

2. After the installation of Master Lu is completed, click the Master Lu icon to run Master Lu.

3. Click the option of hardware detection in the interface of Master Lu's window.

4. Then click on the hard disk information in the menu.

5. In the hard disk information, you can see the time and number of hard disk use.

With Master Lu detection, the hard disk can be used for time and times. Hope it helps.

It's simpler, and the next Master Lu software will be able to see it.

Generally, there is no problem within 24 hours, and the manufacturer will do the hard disk detection, so that there will be a certain amount of time to use.

No more than 200 hours at most, because there is a black disk to go through a week, which is a 7*24 test.

Then it depends on what brand you are IBM has tested the new machine through the number of battery uses, and other brands have never heard of it, let alone tested the hard socks to see if it is a new machine.

HDThe Chinese Green Yu Macro Lupei Color Edition HD Tune is a small and easy-to-use hard disk tool software,Its main functions are vertical directory of hard disk transfer rate detection,Health status detection,Temperature detection and disk surface scanning and other ** address。

I remember that HDTune used to be able to check the power-on time of the hard disk.,But I can't do the new version later.,I'm depressed and dead.,I can only use other checks.,For example, hdlife and other searches.,You can also check the reputation of shouting.。

If you are not very familiar with it, use a USB flash drive to install Master Lu to check, and there is information in the label of "Hardware Detection" - Hardware Health. If you use hdtune or everest, although the information is richer, it is more complicated, and it is not as convenient as Master Lu.

1. If you need to install Master Lu to detect the hard disk, there is information in the tab of "Hardware Detection" - Hardware Health. The details are shown in the figure below.

2. It should be noted that when checking the power-on time of the hard disk, you must pay attention to the brand of the hard disk, different brands have different timing methods, such as Fujitsu uses seconds for timing, and Seagate uses hours.

It's okay to install a Master Lu.,After the installation is completed, the overall scan will be carried out.,Then you can see the power-on time in the hard disk information.。

Pay attention to the brand of the hard disk when the power is on, different brands have different timing methods, such as the most alternative Fujitsu, which uses seconds, not the standard of other brands.

With HDTune, there is a green version on the Internet, just put it in a USB flash drive and bring it over.

Of course, you have to look at the hard disk usage time, generally dozens of hours are normal, and there is a problem if you break 100....It is also necessary to see if the LCD screen has bad spots, whether the independent display is brushed out, it is very necessary to inspect the machine in person, there is a problem to replace on the spot, and when you go home and find a problem, you need to go through the after-sales order to replace the machine, which is relatively troublesome!

Generally, there are not many hard disks to buy machines to detect now, because hard disk notebooks are at least 2 years old, and there are 3 years. Generally, the computer can not be used, and the probability of problems with the hard disk is extremely low! If you want to rest assured, you can go to a larger chain store to buy it, and if there is a problem, it can be solved in time, and it will not be blamed.

Like Hongtu Triplet Computer Chain, Suning Electric, and Five-Star Appliances are all good!