Tianyu B899 s mobile phone can t turn on, what s going on

Updated on number 2024-05-25
12 answers
  1. Anonymous users2024-02-11

    Hello, according to your needs, the Tianyu B899 model mobile phone can not be turned on, it may be due to the program or hardware influence of the mobile phone itself, or it may be that the battery is insufficient or has reached the service life, it is recommended to try it in the following ways:

    1.Check whether the battery is charged, it is recommended to connect the charger for half an hour before turning it on to try;

    2.Check whether the battery is in a dormant state, and the way to activate the battery: It is recommended to use a data cable to connect to the computer for two hours to see if there is a charging display, and if there is a charging display, then use the charger to try to charge;

    3.If there is a second battery, it is recommended to try after replacing the battery;

    4.If none of the above methods can be turned on normally, it is recommended to contact the national after-sales service site of Tianyu.

  2. Anonymous users2024-02-10

    It may be that the battery is used in space, and you use the universal charger to charge 10 minutes, and it is OK to use the original charger for a few hours!

  3. Anonymous users2024-02-09

    Plug in the charger and try to turn it on after 10 minutes while charging.

    Or try changing the battery.

    If neither of these methods work, then the phone is a problem.

    Find Tianyu's repair station.

  4. Anonymous users2024-02-08

    Warranty, find a warranty and let him repair it for free.

  5. Anonymous users2024-02-07

    What should I do when I encounter a phone that won't turn on?

    Normally, the phone can't turn on, it may be caused by the battery, so if we can't turn on the phone, we should first check whether the battery is currently charged, whether the battery is placed in the correct position, and whether the battery's electrodes are clean and dry. If the battery is confirmed to be in good condition, we should confirm whether the power button of the mobile phone is in good contact, if the above phenomenon can not be solved at this time, then we should send the mobile phone to a professional repair station to let professional staff help overhaul it, and the user had better not disassemble the mobile phone without authorization.

  6. Anonymous users2024-02-06

    Hello, if your phone can't be turned on at the moment, it is recommended that you try it as follows.

    1) Try changing the battery to try it out.

    2) If there is only one battery, it is recommended to connect with the computer to charge, check whether there is a charging display, you need to activate the battery for about 2 hours, although it may not be displayed when connected, but it doesn't matter, observe whether there is a charging prompt after 2 hours, if so, turn to normal charging.

    3) If it is still not displayed, it is recommended to contact the Tianyu after-sales service center, and the address of the Tianyu national after-sales service center.

  7. Anonymous users2024-02-05

    Because B920 is not a smart phone, so it is very likely that the battery and the machine contact problem is not turned on, first of all, make sure that you have not dropped the mobile phone before, the possibility of not turning on the machine and the system is very small, but it cannot be ruled out, you first remove the battery and reinstall it to try a few more times, and then it is very likely to be a problem with the system!

  8. Anonymous users2024-02-04

    I don't understand, I haven't encountered such a situation as you, why don't you go to the after-sales service to take a look, is it still under warranty? I think this situation should belong to the mobile phone itself, don't worry, isn't there after-sales! It's been repaired, and tell me about it, thank you!

  9. Anonymous users2024-02-03

    Solution:

    1) Check whether there is a virus on your phone.

    If the phone suddenly and frequently restarts, it is likely that it is a virus. You can use the mobile phone security guard to scan and disinfect the mobile phone first, and clean it up.

    2) Uninstall some unnecessary software.

    If there are too many mobile phone installers and too many software running at the same time, it is easy to fail to run and restart.

    3) Software conflict issues.

    If you think about whether you have installed or upgraded any software recently, it is often these software conflicts that cause the system to restart automatically, so you only need to uninstall the software that caused the conflict.

    4) Factory reset.

    If you can't be sure what software or plug-ins are causing your phone to restart frequently, you can choose to factory reset your phone and save the more important things on your phone before doing so.

    5) There is a problem with the SIM card.

    In addition to the internal software problems of the phone, the hardware problems of the mobile phone can also cause the phone to restart, and the SIM card error is a common hardware problem. Change a SIM card to the phone and see if there is a reboot to determine whether it is a SIM card problem.

    6) Phone battery contact issues.

    Poor contact of the mobile phone battery will also cause the mobile phone to automatically restart, and you can take it to the mobile phone repair office for consultation and help.

  10. Anonymous users2024-02-02

    My phone is also Tianyu B899, and it has crashed a few times, but it is not often recommended to go to customer service to see if there is a problem with the motherboard

  11. Anonymous users2024-02-01

    Hello, 1) Try to change the battery to try it out.

    2) If there is only one battery, it is recommended to connect with the computer to charge, check whether there is a charging display, you need to activate the battery for about 2 hours, although there may not be a display when connected, but it doesn't matter, observe whether there is a charging prompt after 2 hours of noise, if so, turn to normal charging.

  12. Anonymous users2024-01-31

    Most of the power is used too thoroughly, the basic voltage of the battery is not enough, try it with universal charging, if it doesn't work, change the battery and try it again, then take the repair to test it to see if the power supply is broken.

Related questions
5 answers2024-05-25

If you can enter recovery, flash the machine; You can't just "save bricks". >>>More

7 answers2024-05-25

In fact, Apple designers and developers have long thought of this problem, that is, if you hold down the power button and the home button, it will enter the reset restart mode. Then, the phone restarts. It's the same as pressing the reset key after our computer crashes. >>>More

12 answers2024-05-25

1. First of all, disassemble the whole machine, and prepare to use the corresponding screwdriver before that. >>>More

11 answers2024-05-25

1. Rest for more than ten minutes before turning on, if it still can't be turned on, you can try to plug in the charger and then click the power on button. >>>More

28 answers2024-05-25

Hello! It is recommended that you try the following methods to see if it can be turned on: >>>More