Solid wood flooring Do you want to level it, and what will happen if you install wood flooring witho

If it is installed with the keel method, there is no need for additional leveling, and the keel itself can be leveled.

If the bottom plate method is used, it needs to be leveled, and the flatness before installation should be no more than 5 mm within 1 meter.

If the adhesive method is used, it also needs to be leveled, and the flatness before installation should not be more than 2 mm within 1 meter.

First, the method of leveling and the advantages and disadvantages of each method:

Clause. 1. Cement mortar leveling.

Advantages: It is suitable for all kinds of ground, all kinds of ground leveling before all kinds of floor laying.

Disadvantages: The leveling thickness is too thick at 25 35mm, if the cement mortar ratio is not right, the surface layer will be pulverized and sanded, ash and cracks. The floor (laminate flooring) forms some gaps with the screed, and when people step on it, the dust on the ground is dispersed and dispersed, and then escapes from the expansion joints.

It spreads out through the gaps in the baseboard, forming a phenomenon of dust. In addition, the cement mortar is not leveled in a detailed place, and there will be a hollowing phenomenon.

Applicable environment: the house is raised high, radiator heating, leveling before laying solid wood flooring, and leveling before laying composite flooring.

Oppai flooring. Clause.

Second, plaster leveling.

Advantages: It can be used for local leveling, does not increase the height of the ground, the leveling thickness is about 5 20mm, has almost no effect on the height of the room, the drying speed is fast, relatively cheap, and the construction is convenient.

Disadvantages: It can only be used for leveling in a small area.

Applicable environment: the flatness of the room is slightly better, the ground is relatively smooth, and there are uneven places locally.

Clause. 3. Self-leveling leveling.

Advantages: no segregation (various components in the cement mortar are not separated during the whole construction process and after the hydration reaction), no sand, no dust, no cracks; The shrinkage rate is low, usually in the thousandths, after the hydration reaction, there are no cracks on the surface, and the shrinkage rate of ordinary cement is large, and cracks are easy to appear. The construction thickness is thin at 2-5mm.

After construction, the surface can be walked 4-8 hours, and the floor can be paved after 36-48 hours.

Second, the precautions for laying the floor:

1. Before installation, check whether the ground is flat, if the local area is slightly uneven, you can use "paving treasure" or white gypsum leveling. If the unevenness is too serious and the area is too large, you should ask a professional construction team to level it (there are professional construction teams in the decoration market).

2. Before installation, the ground should be cleaned and the ground should be dry.

3. Determine the installation direction, and the floor is installed under good lighting conditions, and the level of light is good; In the case of normal lighting, it is better to be parallel to the long side of the room.

4. Check whether the color of the floor is matched correctly when opening the package, whether the floor is damaged, and whether there are quality defects. If a problem is found, the defective floor will be stored separately.

5. When laying plastic film, a margin of more than 30 mm should be left at the edge of the laying area when laying plastic film, so as to be able to wrap the edge of the floor and prevent moisture from invading; At the same time, each adjacent two pieces of mulch film must be closely connected, and to be pasted with wide tape, the key to the laying of mulch film is to prevent the invasion of moisture, therefore, the above method must be strictly observed.

Solid wood flooring, installation generally have to be the bottom, either the deck fixed ground, or the keel, so it does not need to be very flat, leveling only needs to be basically flat, there is no relationship between sand and small pits, because your floor is on the fixed deck or keel, so don't worry about this problem, the end of the year to decorate, pay attention to your health.

It depends on whether you make a wooden keel or not, if you do, it doesn't matter if it doesn't have a big difference in flatness. If you don't do it, you will have high requirements for flatness.

It will definitely affect the installation effect, and if the unevenness of the ground is not very serious, it can also be leveled by installing the keel. If you don't install the keel, you have to deal with it before installation.

The flatness is better, a self-leveling can be, if the drop is too large, you have to use cement mortar rough leveling, and then do self-leveling because the leveling on the building is unqualified, there will always be a drop, if not leveling, the floor will be uneven when laid up, creaking sound, the wooden floor against the wall should leave a gap of 8 12 mm, which is conducive to ventilation, the place where the floor and the skirting board intersect, if you want to install a closed wooden pressure strip, you should leave ventilation holes on the wooden skirting board.

If the crossing direction is measured at the same position and a gap of more than 3mm is detected in the drop height, it means that the ground is uneven, so it is necessary to carry out ground leveling, and then pave the floor. If the ground is uneven, the wooden floor will be installed, people will tremble when stepping on the wooden floor, and there will be a sound, and the wooden floor will be warped after a long time, which will shorten the service life of the wooden floor, so the ground must be leveled before installing the wooden floor.

Our project is called "ground leveling", and the practice is: drawing lines with a level, bricklayers using cement and plain ash to smooth it, and some even use the "self-leveling" process. The ground is uneven, the floor is paved, there will be a place to hollow, people will feel that the floor suddenly has elasticity when stepping on it, although there is a floor film under the floor can be improved a little, but the effect is minimal.

The lock at the joint between the plate and the plate is easy to deform and crack. Obviously, you can use the wooden floor for more than ten years or even a lifetime, and it will be broken after a few years, don't doubt the quality of the wooden floor, but the worker master did not give you a place. Laying wooden floors must be leveled, and 80% of the problems that occur in the later use of wooden floors are due to uneven floors when laying floors in the early stage.

Therefore, it is better to spend more money to do a self-leveling, but also to level. The thickness of leveling is relatively thick, generally reaching 2-4cm, and when we carry out cement mortar leveling construction, if the treatment is not good, the ground is prone to cracks and ash, and after installing the wooden floor, it is easy to disperse the dust through the gaps.

It can easily cause cracks, it can easily deform, there will be a crunch sound, it may smell, it may provide accommodation for bugs.

The consequence of this is that the ground is uneven, there will be tilting angles, and things will slip. Therefore, when laying the floor, the ground should be leveled.

We know that the use of reinforced flooring in renovations is very common because it is very durable. The cost is not high, and it is very safe to use. Unlike hardwood flooring, it requires regular maintenance and is quite cumbersome.

I'm sure many of my friends have thought about this before laying laminate flooring. That is, does the ground need to be leveled? The ground is uneven, and there will be no flatness problem after the reinforced ground is paved.

In fact, looking for levelization is something that needs to be explicit, but others have done it with better results than cement leveling.

The usual cement is usually made by master masons, and the cost of labor is about 35 won. What is the effect after leveling, friends with decoration experience should have a deep experience. In other words, no matter what the mason did in the first place, it still felt problematic to find this flat place.

Although it doesn't have much impact on the flooring, if you spend money yourself, but don't do it well, you will feel a little uncomfortable. In fact, many friends are now starting to use free levelization instead when dealing with levelization, which is now a more popular method.

Its advantage lies in its flatness, which is better than general levelization. At the same time, it also has the role of making ashtrays. Avoid the problem of ash formation in the gaps after the ground is laid.

That is, with self-leveling the ground, there is no need to mop the floor anymore. In this part of the cost, it is definitely a little higher than ordinary cement, but it is also limited. But in any case, if the laminate flooring is laid at home, it must be leveled.

Even if the existing ground is already leveled, it should be leveled.

When the floor is laid, it will be a little lower than the floor tiles in other rooms, and stairs will appear. It's ugly. Also, don't lay the floor flat.

Because over time, the floor will collapse and affect the life of the floor. Another point that needs to be reminded is that if you level the cement at home, you can tell the master not to treat it only after finding the level. After the light, the ground will be smoother and look better, but after the cement shrinks, the ground will crack, creating hollowing.

If you are worried about not getting light, you can burn ash on the floor and brush a layer of flooring will solve the problem.

When laying wooden floors, it is necessary to level them. There will be a lot of harm if it is not leveled, which will affect the life of the wooden floor and will be easy to ash, and it is easy to take care of after leveling, and it is relatively smooth.

Regardless of the floor, foundation leveling is a must, and whether self-leveling is required or not depends on the installation method and the level of foundation leveling.

It needs to be leveled, because the floor will be particularly beautiful in this way, and it is a straight line horizontally, which is very good.

Yes, and after leveling the ground, the floor is relatively regular, and there will be no particularly serious stilts.

Today, I will answer to you, do you need to level the wooden floor before laying it. With the continuous improvement of the economic level, most of the furniture today is basically paved with flooring. This flooring has become everyone's first choice for decoration materials.

But laying the floor is not that simple, and there are many things to pay attention to. So, the following will take you to see if you need to lay the floor and level, and then lay the floor to understand the precautions. Is the floor to be leveled, and the floor is leveled, which is an important prerequisite to ensure the use of the floor.

Many people ignore this project and do not find a flat place to install the floor. Eventually, when the floor is used, the lock will be broken, and there will be dust in the corner. This process may seem simple, but it has a great impact on how well the floor is placed.

Precautions for laying floors, pay attention to the moisture of the cement floor when laying wooden floors, and keep the ground dry. If the moisture on the cement surface is not cleaned before paving, some moisture will be generated after paving, resulting in cracking of the floor, and the floor will warp after installation.

Investigate the direction of the floor first, and leave gaps in special places. In general, it is best to place the entire room in the direction from the other end of the room and then slowly turn to the other side. The assembled model should be done well for laying the floor, and special care should be taken to cut the floor.

The first few rows of flooring are usually used as the standard before paving, and the main purpose of this is to ensure that the entire floor is paved. Therefore, the first few lines of packaging must be done well, and the mated model must also be done well. In this way, the subsequent packaging work can be carried out smoothly.

Yes, it needs to be leveled, because then it will be better to lay the planks.

It needs to be leveled, so that it will be very convenient, and it is also very good-looking, and it will not cause unevenness, so it needs to be leveled.

It needs to be leveled, because it will be very convenient, and there will be no sequelae in the future, so it needs to be leveled, and it will not fall, and it will not be uneven.

1. The importance of sports wood floor ground leveling.

Whether the sports wood floor is paved or not, of course, it needs to be leveled. What happens if the paved floor is not leveled? If the sports wood floor is not leveled, or the leveling does not meet the requirements, it will make the sports wood floor pavement uneven, affecting the stability of the sports wood floor system.

Athletes will make a gurgling sound when they step on the sports wooden floor. Thus affecting the sports experience of athletes.

2. How to level and divide the sports wood floor.

1) Leveling and cleaning of cement floors and walls (where baseboards are installed).

2) using the 9-point method, using a spirit level to determine the horizontal plane to mark the side wall;

3) Determine the position of the outermost dividing line and mark it on the side wall;

4) Confirm that the cross intersection is in the same horizontal plane, and the convex part is smashed and flattened by the recess part of the drawing design material;

5) Brush the surface of the skids with anti-corrosion materials.

Let's talk about the leveling process of sports wood flooring:

1. Handover at the construction site: In order to ensure the installation quality of the wooden floor of the basketball hall, Party A shall provide a standard baseline (0) before entering the stadium, and the installer shall detect the horizontal error of the site according to the benchmark, and the positive and negative error of the cement base surface of the venue shall not be greater than 5mm.

2. Venue cleaning: Before installing the wooden floor of the basketball hall, first check whether the ground is waterproof, especially a layer of ground, and then clean the field and remove the cement mortar floating.

3. Instrument leveling: according to Party A's requirements for the wooden floor of the basketball hall, the cement foundation surface of the stadium is leveled with a level, and the height difference is checked.

Fourth, put the baseline: according to the construction design drawings every 400mm 400mm center line distance to release the wooden keel installation line.

Fifth, find the reference point: use a level of about 3m to determine the level of 0 at the rubber elastic leveling pad.

When the composite floor is laid in the home decoration, it must be leveled, if the composite floor is uneven, it is like stepping on the feeling of stepping on the air, and the floor will crack after a long time, which will reduce the life of the floor, and if it is not leveled, the floor will squeak when stepping on it. If it is a floor heating after the laminate floor, the heat transfer effect is not very good, and there will be harmful substances after formaldehyde heating.