The soymilk machine beats the rice cereal, and the bottom is sticky

The soymilk machine is heated at the bottom, because there is no stirring when heating, the large particles of rice cereal sink to the bottom, and as the temperature rises, the rice cereal will stick to the bottom, just like cooking porridge in a household pot, wash it and it will be good. If there is too much sticking to the bottom, then the next time you are making rice cereal, you must be a little thinner, and it will be better to put a little less rice.

In this case, it may be that the soy milk bucket is pasted to the bottom.

There are three reasons for this: Solution.

The function of the choice does not correspond to the food. Select the correct function key.

Excessive amount of rice is used in the amount of food at home.

If the amount of water is too low, add water between the upper and lower water levels.

That's because the bottom can be heated, just like when cooking porridge, the bottom of the pot is pasted

Which brand of soybean milk machine is used by the landlord, if it is Joyoung, it is recommended that you take it to the local Joyoung after-sales service outlets to see, or you can call Joyoung's after-sales service ** to consult and solve. I wish you a speedy solution to your problem.

How to make rice cereal in the soybean milk machine, black sesame paste is the best and simple way.

The reason why the soymilk machine beats the paste:

The area of the bottom of the cup body is relatively small, the heat on the unit area at the bottom of the cup body is higher, the heat is too concentrated, and the number of sails, especially when the heating device is set in the middle of the cup body, it is very easy to appear that the soybean milk is burned and the residue sticks to the bottom of the cup, and the taste of the slurry that is prepared is not good. The soymilk maker was used improperly and was not used in accordance with the steps on the instructions. The solution of the soymilk machine paste tube:

It is necessary to use a steel wool ball to clean the place where the pipe is glued or pasted. Let the soymilk machine cool for 5 minutes before making soymilk, because the power of the soymilk machine vertical car liquid heating pipe is large, the heat is too concentrated, and the life of the heating pipe has been consumed after heating the pipe paste pipe or sticky pipe. Try to avoid using too much rice, rice is a sticky substance, if there is too much rice, it is easy to stick to the tube or paste the tube.

Reason for pasting the pot: too much rice or too sticky.

Solution: Put one-third of the cup of soybeans, and the other two-thirds of the cup can be put in rice, add water to the ridge above the lowest water mark and below the highest water line. If you don't grasp it well at first, you can put a little less rice.

It doesn't matter if the rice core no-hand paste is thin, but if it is too viscous, the paste pot will be changed, and the pipe will be blackened, and there is even a danger of being burned.

Cleaning method: The cup and heating pipe of the soymilk machine should be fully soaked with water first, and the remaining rice cereal should be soaked soft and washed off with a rag. The black color on the cup and heating tube can be gently scrubbed with a steel wool ball; You can also use a toothbrush dipped in toothpaste to brush repeatedly, and a dry rag dipped in toothpaste can also be rubbed vigorously repeatedly.

Finally, rinse with water.

Reason for pasting the pot: too much rice or too sticky.

Solution: Put one-third of the cup of soybeans, and the other two-thirds of the cup can be put with rice, add water above the lowest water mark and below the highest water line. If you don't grasp it well at first, you can put a little less rice.

It doesn't matter if the rice cereal is thin, but if it is too sticky, the pot will be blackened, and there is even a danger of being burned.

Cleaning method: The cup and heating pipe of the soybean milk machine are fully soaked with water first, and the remaining rice paste is soaked soft with a rag to wash off. The black color on the cup and heating tube can be gently scrubbed with a steel wool ball; You can also use a toothbrush dipped in toothpaste to brush repeatedly, and you can also use a dry rag dipped in toothpaste to rub vigorously repeatedly.

Finally, rinse the mold with clean water.

The reasons may be as follows:

The ratio of water and beans in the soymilk machine is not appropriate, and there are too many beans, resulting in stickiness and resulting in a paste at the bottom.

The efficiency of the motor of the soymilk machine becomes low, and it cannot be stirred, resulting in uneven heating, and you can observe whether the Xingchang motor rotates normally.

The function program of the soymilk maker is selected incorrectly.

The soymilk machine clicks completely damaged or the motor is stuck abnormally.

The temperature sensor of the heating function of the soymilk machine is damaged, causing the celery to reach the set temperature and still heating.

Ingredients: 25g of black sesame seeds, 25g of walnut kernels, 20g of almonds, 50g of rice, 1000g of water, appropriate amount of red cover with sugar.

Method 1: Prepare the black sesame seeds, walnut kernels, almonds, and rice.

2. Put the black sesame kernel cracked peach and almond rice into the upper layer of the oven and bake at 150 degrees for 10 minutes until the color becomes slightly yellow.

3. Put the black sesame seeds, walnut kernels, almonds, and rice source mold into the soymilk machine and add water.

4. Select the 'Rice Cereal' function key and cook for about 25 minutes.

5. The rice cereal is ready.