Lenovo Y410 Notebook The battery in the bottom right corner shows that the power is on, not charging

You should be a physical damage that can't be repaired, or it's here, as shown in the figure, you haven't set it up, if it's the maximum endurance, you can charge it up, if it's the next one, it won't be full.

Dear Lenovo users, hello:

It is recommended that you try updating your power management driver.

Also, select the Always fully charged option --- --- battery maintenance in your power management software—restart your computer and see if that resolves your problem.

IDEA Forum.

Think Forum.

Lenovo Community.

Lenovo notebook 0% power is on, not charged for the following reasons:

First, it may be the reason for the laptop battery, the battery will have the number of charging times and service life, if it exceeds the range of charging times and service life, then there may be a situation that cannot be charged, and we need to replace the battery to solve it.

Second, it may be that the charger of the computer is damaged, it is recommended to plug in another charger to try charging, or it shows that it is not charging, it may be a problem with the adaptive charger, go to the after-sales service to buy an original charging adapter.

3. If the power interface of the computer is loose or malfunctioning, it is recommended to replace the power port again.

Fourth, the battery accuracy problem, this is the system mistakenly thinks that the battery is full, resulting in the power can not be charged, it is recommended that netizens use the system's battery management software to calibrate it, many computer brands such as Dell, Lenovo, Sony, Asus, etc. have their own battery management software.

Precautions for laptop charging:

1. Use up the power of the original battery.

The first thing you need to do when you buy a computer is to use the battery in your laptop cleanly, and don't start charging it when you don't see a lot of points in the battery, which is not right. The factory power of the laptop is to protect the battery, and it must be used up before it can be charged.

2. The charging time of the first three charges should be between 12 hours and 14 hours, and the second charge should be used up each time it is fully charged.

The first three Biqing times of charging is very important, although the current battery has no dust memory function, you can use it casually, but the battery is a battery after all, a good start can determine the future life of your battery. Whether it is the previous battery or the current battery, it is necessary to pay attention to the previous point.

3. If there is a battery protection program, adjust the battery to the most common battery life mode.

This mode is suitable for users who use the adapter for a long time, not for those who use batteries, so if your computer is played with a power source, then be sure to set it to the optimal battery maintenance state. The specific adjustment method is as follows: <>

Workaround:

1.Check to see if the charging feature is disabled.

The notebook has a "no charging" function in the battery options, and the adapter directly supplies power to the notebook without charging the battery, in which case it cannot be charged. It is recommended to check the battery options to see if the charging function of the notebook is disabled, of course the win8 system is slightly different.

2.Check if the charger is original.

3.If the computer battery is in the 90% range, in order to maintain the battery, the computer will sometimes not be charged when connected to the power supply.

5.Poor contact and battery damage.

6.The charger and battery are loose.

Damage to the charger will also cause the power connection to not be charged, try to change to a charger of the same brand.

The reason why the Lenovo notebook prompts that the power supply has been turned on and not charged may be that it has not been charged for a long time, resulting in a serious power loss after the internal power of the battery is exhausted, but the protection of computer charging is not allowed to be overcharged, as long as the battery option is set, the specific method steps are as follows:

1. First open the Lenovo notebook, click the start option in the lower left corner of the notebook, and then click the "Control Panel" option in the pop-up options menu.

2. After opening the "Control Panel", enter the power options interface in the interface, and click the "Change Plan Settings" button on the right side of the corresponding item in the "Plan Display" column in the "Power Settings" interface that opens.

3. At this time, the "Change Plan" interface will open, and click the "Change Advanced Power Settings" button in the lower left corner.

4. From the "Power Options" window that opens, switch to the "Lenovo Power Management" tab and click the "Restore Plan Defaults" button.

1. Can the battery be charged after trying to release the static electricity?

Desktop operation method:

1. After the main computer is powered off, unplug all connecting cables and connected devices from the chassis.

2. Press and hold the power button for 10 seconds, press 3 times repeatedly, after the operation is completed, only connect the power cord and the monitor to boot the test, if it is normal, then connect the keyboard and mouse normally to boot the test, if the fault is still there, it is recommended to contact the engineer to deal with it.

How to do it with a notebook:

1. If the laptop only has an external battery, the operation method is: after the laptop is turned off and powered off, unplug all the connecting cables and connected devices on the body, remove the external battery, press and hold the power button for 10 seconds, press and hold it 3 times, replace the battery after the operation is completed, connect the power adapter and turn on the power again.

2. If the notebook uses the power supply mode of "built-in battery" or "built-in battery + external battery", you can find out whether there is a circular hole on the back of the notebook, and the word "reset" is written near the hole, you can unplug all the connecting wires and connected devices of the fuselage in the power-off state, (there is an external battery that needs to be taken out) poke the button in the "reset" hole with a paper clip or card needle for 15 seconds, and check whether the host has been started after 15 seconds, if not, You need to connect the power adapter (if there is an external battery, the external battery will be connected first, and then the power adapter will be connected), and then the power adapter will be turned on after being connected.

3. If the notebook uses the power supply method of "built-in battery", and the "reset" hole to release static electricity is not found on the back, it is recommended to contact the after-sales engineer for processing.

All-in-one operation method:

1. After the machine is turned off and powered off, unplug all the connecting wires and connected devices of the integrated fuselage.

2. Press and hold the power button for 10 seconds, press it repeatedly 3 times before booting the test, if the fault is still there, it is recommended to contact Lenovo at your local after-sales service station.

2. Reinstall the power management driver and power management software.

3. If the power adapter cannot be turned on, you can replace it with the same type of power adapter for testing.

4. If it is fully charged, the battery cannot be turned on after unplugging the power adapter alone, it may be that the battery is not charged. Check whether the battery buckle is loose (except for built-in battery models), and if there is an external battery, you can try to replace the battery of the same model.

5. If the ambient temperature is too low, the battery may not be charged.