How to solve the problem of the router disconnection?

A problem with the router itself.

The solution is to dial in with one of your own machines without using the WAN port and then share it with other machines.

Specific methods: 1. Set the subnet mask of the host's local connection.

2. Set the local connection and subnet mask of other machines.

3. Set other machines preferred.

4. Open the properties of the host ADSL connection (this is not a network card, it is a virtual dial-up connection) and select Allow other users to connect through this computer's Internet connection under the Advanced tab under Internet Connection Sharing.

Other methods: limit the maximum number of connections between Thunderbolt and BT to 25, the maximum upload speed to 10kb s, and limit the number of simultaneous tasks to 1

It is estimated that your router is not tp-link or Tengda, this is his own design problem, the heat dissipation is very poor, the electrical performance of the components used is also poor, when the data traffic is large, it will crash, there is no way to solve it in the software, and it is not possible to flash the firmware, the only thing that can be done is.

1. Control the data traffic and try not to get off BT.

2. Do as well as possible to dissipate the heat, such as placing it in a relatively empty position, or near the fan.

3. Changing routers, Linksys and Netgear are excellent.

The general setting of the node of Xunlei is 1024 - that is, it allows 1024 users to exchange information and share resources at the same time;

It's the IP of the router that you can't enter, which means that the router acts as a transit station here;

From the analysis, the questions are as follows:

1.The "hang-up" problem of the router is changed to "never hang up", the number of dials is set to a larger value, and the dial time is set to 1 second;

2.If the above method doesn't work, you touch the router with your hands, if the router is overheated, the drop is normal! Keep it well dissipated and ventilated;

3.If you have tried all the above points, then you have been hit by a virus that is hiding in the background running a program subroutine, resulting in excessive network traffic and disconnection;

4.There are special cases: the windows system is not maintained for a long time (for example: cleaning up junk files), then it will also lead to frequent drops, and you can try to reset the cat - there is a hole called "rest", use the needle to hold it for about 5 seconds to reset.

Hope it helps.

Try the passwords for all admin

It's basically not a matter of turning off the settings inside, because you haven't touched this before, so the settings won't change.

There is a high probability that the cat is broken, and in this case, you can restart the cat and try it should last a long time.

1. Restart the router. Just unplug the router and plug it in again.

2. Log in to the router, and under "System Tools", select "Restart Router".

3. The router password is leaked, resulting in multiple people using it, and the router base password is changed. Log in to the router and change the password in "Wireless Encryption" under "Wireless Settings". Closed.

4. Change the WiFi name SSID. Log in to the router and change the SSID name under "Wireless Settings".

5. Modify the wifi channel. For example, there are more WiFi signals around, but there are too many WiFi signals on the same channel, which will also cause the setting to accept WiFi signals to be interfered with, resulting in disconnection.

Log in to your router and modify it under "Wireless Settings".

6. The router works for a long time and the temperature is too high, resulting in unstable hardware work. Place the router in a ventilated seat, turn off the router and wait for the router temperature to cool down before use. Install fans, radiators, etc.

7. Modify the WiFi encryption car carrying mode to achieve the most compatible state.

8. Modify the WiFi network mode.

9. Restore the router to factory settings and set up the router from scratch. Turn off all router security features and firewalls.

I also use wireless routing, based on personal experience, the following methods you try, I hope it will help you.

1. First of all, restore the factory settings of the router (there is a small hole in the router and press and hold it for 10 seconds to turn on the power-on).

2. Then reconnect it, if this situation still occurs, please change the power jack. It is possible that the power jack is in poor contact.

3,There may be a voltage instability in your place.,My router used to drop once every 3-5 minutes and thought the route was broken, but there was no problem in changing places.。。。 Holy.

4. If you have tried all the above methods, there is still a problem... You open the properties of your computer's wireless network card, is it set to power saving mode.

If it doesn't work yet.

All I can say is. Brother is really embarrassed.。。。 Hehe.

check if the network cable connector is loose i have encountered it before the router is closed for 10 MINUTES AND THEN THERE IS GENERALLY NO MORE DROPPING . I only know so much and hope to give you some hints.

Hello If it overheats, the router will fake death, and dropping the line is a must The working temperature of the home router is 0-40 degrees

The next time you drop the connection, you touch it, if it's hot, it's overheating and fake death, just turn off the power and cool down

In addition, if you drop it, you can connect again immediately, or it may be the other party's server, or there is a problem with the line

"And you have to refresh the Wi-Fi icon in the online neighbor interface for it to work"

This is normal and does not have to look into this.

Frequent disconnection: It usually takes 3-5 minutes to drop it"

Upgrading your router's firmware may work.