How to Fix Router Freeze What to do if Router Freezes?

Hello! I'm happy to answer for you:

Generally, the main reasons for router crashes are: 1. The load is too large and the load is overloaded, 2. The software bug falls into a crash cycle, 3. The virus on the network continues to attack the router, causing the router to be busy responding and causing a crash, 4. There is too much dust in the machine, 5. The switch connected to it fails, resulting in continuous actions similar to attacking the router, 6. The HUB cluster or switch cluster in the Ethernet network fails, and a large number of broadcast packets are generated Solution to the cause of the virus: Connect a computer that is confirmed to be free of viruses, install a firewall software such as Skynet, and set the security level to medium.

Turn off the router, set the IP of this computer to see if the firewall has intercepted the attack, if the virus is the cause, you will see several or even dozens of attacks per second, see which computer sent it, and repair that computer.

1. Check whether the environment is ventilated, if the heat dissipation is not timely, it will cause a crash;

2. Check whether it is infected with viruses, such as ARP virus;

3. In the configuration interface, "Advanced Settings" and "Advanced Network Settings" are activated to activate "Ignore replies from wan ping";

4. Reset and reset the router.

There are many reasons for router crash, there are hardware, such as heat dissipation, and software, such as the software version is too low, and we need to pay attention to the following aspects.

1.Check whether the environment is ventilated, if the heat dissipation is not timely, it will cause a crash.

2.Check whether you are infected with a virus, such as ARP virus, and use antivirus software to check and kill it.

4.Reset, reset the router.

1.Generally, there are two data in the settings of the ** tool, the first is the number of half-open connections, and the other is the number of new connections. You can make these two data smaller in the settings of the ** tool.

Change the local connection to automatically get an IP address.

When the wireless router is plugged in, do not connect the "modem" (modem) first, reset the wireless router (restore to the factory), connect the computer to any "LAN" port of the wireless router, enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method. Then set it up again.

What to do if the router is stuck.

What to do if the router is stuck.

What exactly is the shape of the router that can still be stuck, is it that the flash indicator has been stuck and does not move? I really haven't seen what state the router is stuck? Is it too hot?

Led to burning. If it really doesn't work, just buy a new one, usually restart the power off process. There is no other way.

There are the following reasons:

1. If the router crashes caused by the number of machines, analyze whether the number of broadband routers and their own machines match the application, and sometimes the broadband router cannot bear the network load at all;

2. Router crash caused by the quality of the router;

3. The router crashes due to incorrect settings;

4. The quality of the access line is poor, the virus causes the router to crash, and the virus in the network sometimes causes the paralysis of the entire network, and some network viruses will attack the specific port of the broadband router or continuously send broadcast packets in the network.